[ELDK] building u-boot

[Anatolij Gustschin]

Hi,

First, please do not top-post. Thanks!

On Tue, 27 Dec 2011 12:55:17 -0200
Érico Porto <ericoporto2008 at gmail.com> wrote:

> did a
> 
> erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make clean
> erico at 050278:~/Downloads/u-boot-2011.12-rc3$ source
> /opt/eldk-5.1/powerpc-softfloat/environment-setup-powerpc-nf-linux
> erico at 050278:~/Downloads/u-boot-2011.12-rc3$ export
> CROSS_COMPILE=powerpc-linux-
> erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make mpc832xemds_config
> Configuring for MPC832XEMDS board...
> erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make all
> 
> still getting
> 
> make[1]: Entering directory
> `/home/erico/Downloads/u-boot-2011.12-rc3/common'
> make[1]: *** No rule to make target
> `/home/erico/Downloads/u-boot-2011.12-rc3/include/asm/system.h', Needed by
> `cmd_bdinfo.o'.  Stop.
> make[1]: Leaving directory `/home/erico/Downloads/u-boot-2011.12-rc3/common'
> make: ** [common/libcommon.o] Error 2

Hm, it builds without issues here, both U-Boot v2011.12-rc3 and
v2011.12. Seems something is wrong with your U-Boot source. Why are
you using v2011.12-rc3? Can you please try using v2011.12 which has
been released last week [1].

Best regards,
Anatolij

[1] ftp://ftp.denx.de/pub/u-boot/u-boot-2011.12.tar.bz2