[ELDK] I am using ELDK 4.2 for ZYNQ Board(armVFP)

[Rama Chandra]

Hai,

I am using ELDK-4.2 Version for ZYNQ Board actually i am installed Below
Procedure But still it is showing different Failures those are;-
1853  sudo mkdir /opt/eldkarm
1854  sudo chown ram:ram /opt/eldkarm
1860  sudo ./install -d /opt/eldkarm armVFP-linux
1863  sudo ./ELDK_MAKEDEV -d /opt/eldkarm/
1864  sudo ./ELDK_FIXOWNER -d /opt/eldkarm/
1865  cd /opt/eldkarm/
1866  ls
  echo 'PATH=$PATH:/opt/eldkarm/usr/bin:/opt/eldkarm/bin
  export CROSS_COMPILE="armVFP-"
  export ARCH=arm' > setup_eldk & chmod u+x setup_eldk
1886  ls
      source /opt/eldkarm/setup_eldk
1888  cd /home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5/
1889  make zynq_zc70x_config
root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5# make distclean
root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5# make
zynq_zc70x_config
Configuring for zynq_zc70x board...
root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5# make all
Generating include/autoconf.mk
cc1: error: unrecognized command line option "-mno-unaligned-access"
Generating include/autoconf.mk.dep
cc1: error: unrecognized command line option "-mno-unaligned-access"
cc1: error: unrecognized command line option "-mno-unaligned-access"
armVFP-gcc -DDO_DEPS_ONLY \
-g  -Os   -fno-common -ffixed-r8 -msoft-float  -fno-strict-aliasing
-mno-unaligned-access -D__KERNEL__
-I/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5/include -fno-builtin
-ffreestanding -nostdinc -isystem
/opt/eldkarm/usr/bin/../lib/gcc/arm-linux-gnueabi/4.2.2/include -pipe
 -DCONFIG_ARM -D__ARM__ -marm -mno-thumb-interwork -mabi=aapcs-linux
-march=armv5 -Wall -Wstrict-prototypes       \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
cc1: error: unrecognized command line option "-mno-unaligned-access"
make: *** [lib/asm-offsets.s] Error 1
root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5#
I couldn't understand this problem anything mistake could you help me and
Thank u
-- 
Thanks & Regards,
RamaChandra PC
+918892147159.