U-Boot 1.3.1 (Jul  9 2009 - 10:37:35)

CPU:   8540, Version: 2.0, (0x80300020)
Core:  E500, Version: 2.0, (0x80200020)
Clock Configuration:
       CPU: 660 MHz, CCB: 264 MHz,
       DDR: 132 MHz, LBC:  33 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: ADS
    PCI1: disabled
I2C:   ready
DRAM:  Initializing
    SDRAM:  8 MB
    DDR:  8 MB
FLASH:  8 MB
L2 cache 256KB: enabled
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   TSEC0, TSEC1, FEC
=> setenv bootargs console=ttyS0,115200 root=/dev/ram rw
=> bootm 0xff800000 0xffa00000 0xffd80000
## Booting image at ff800000 ...
   Image Name:   Linux-2.6.30
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1265710 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffa00000 ...
   Image Name:   Simple Embedded Linux Framework
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    1859256 Bytes =  1.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Booting using the fdt at 0xffd80000
   Loading Ramdisk to 005e7000, end 007aceb8 ... OK
   Loading Device Tree to 007aa000, end 007ab226 ... OK
Using MPC85xx ADS machine description
Memory CAM mapping: 4/4/0 Mb, residual: 0Mb
Linux version 2.6.30 (ashok@ashok) (gcc version 4.2.2) #1 Wed Jul 8 17:00:11 IST 2009
Found initrd at 0xc05e7000:0xc07aceb8
console [udbg0] enabled
setup_arch: bootmem
mpc85xx_ads_setup_arch()
arch: exit
Zone PFN ranges:
  DMA      0x00000000 -> 0x00000800
  Normal   0x00000800 -> 0x00000800
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00000800
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 2032
Kernel command line: console=ttyS0,115200 root=/dev/ram rw
NR_IRQS:512
mpic: Setting up MPIC " OpenPIC  " version 1.2 at e0040000, max 1 CPUs
mpic: ISU size: 56, shift: 6, mask: 3f
mpic: Initializing for 56 sources
PID hash table entries: 32 (order: 5, 128 bytes)
clocksource: timebase mult[79364d9] shift[22] registered
Dentry cache hash table entries: 1024 (order: 0, 4096 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 3596k/8192k available (2460k kernel code, 4596k reserved, 100k data, 77k bss, 128k init)
Kernel virtual memory layout:
  * 0xffffe000..0xfffff000  : fixmap
  * 0xfdff9000..0xfe000000  : early ioremap
  * 0xc1000000..0xfdff9000  : vmalloc & ioremap
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 65.79 BogoMIPS (lpj=131584)
Mount-cache hash table entries: 512
net_namespace: 520 bytes
NET: Registered protocol family 16
             
rstcr compatible register does not exist!
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 1815k freed
prom_parse: Bad cell count for /soc8540@e0000000/mdio@24520/ethernet-phy@0
prom_parse: Bad cell count for /soc8540@e0000000/mdio@24520/ethernet-phy@1
prom_parse: Bad cell count for /soc8540@e0000000/mdio@24520/ethernet-phy@3
msgmni has been set to 16
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console handover: boot [udbg0] -> real [ttyS0]
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
brd: module loaded
loop: module loaded
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RAMDISK: gzip image found at block 0