<div dir="ltr">Hello Heinrich,<div class="gmail_quote"><div dir="ltr"><div><br></div><div>currently u-boot does not recognize the network interface for the raspberry pi 4.</div><div>So i cannot get a ip-address, and so on...</div><div><br></div><div>Currently only the raspberry pi 4 native bootloader can boot from tftp.</div><div><br></div><div><br></div><div>Regards,</div><div>Sascha<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Am Di., 19. Nov. 2019 um 12:23 Uhr schrieb Heinrich Schuchardt <<a href="mailto:xypron.glpk@gmx.de" target="_blank">xypron.glpk@gmx.de</a>>:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br>
<br>
On 11/19/19 11:05 AM, Sascha Dewald wrote:<br>
> Hi Matthias,<br>
> <br>
> yes, i network boot with the beta firmware, since a while.<br>
> <br>
> Short Steps:<br>
> * take latest bootloader from ( <a href="http://github.com/raspberrypi/firmware/boot/" rel="noreferrer" target="_blank">github.com/raspberrypi/firmware/boot/</a><br>
> <<a href="http://github.com/raspberrypi/firmware/boot/" rel="noreferrer" target="_blank">http://github.com/raspberrypi/firmware/boot/</a>> )<br>
> <br>
> * patched the beta pieeprom & vl805 with the recovery.bin and<br>
> bootconf.txt - ( <a href="http://github.com/raspberrypi/rpi-eeprom/boot/" rel="noreferrer" target="_blank">github.com/raspberrypi/rpi-eeprom/boot/</a><br>
> <<a href="http://github.com/raspberrypi/rpi-eeprom/boot/" rel="noreferrer" target="_blank">http://github.com/raspberrypi/rpi-eeprom/boot/</a>> )<br>
> <br>
> * in bootconf.txt inside pieeprom i used BOOT_ORDER=0x12 - so that<br>
> network boot was at first. (<br>
> <a href="https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware/raspberry_pi4_network_boot_beta.md" rel="noreferrer" target="_blank">https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware/raspberry_pi4_network_boot_beta.md</a><br>
> )<br>
> <br>
> <br>
> Yesterday i figured out, that it was possible to embed the initramfs<br>
> into the kernel. Today i will try this, because my distribution has NFS<br>
> as module for the root filesystem.<br>
> Would be nice if the rpi4 would accept the ramfsfile from the config.txt<br>
> to load the initrd from tftp .. ;-)<br>
<br>
How about using iSCSI instead of NFS. You should be able to boot via<br>
U-Boot, iPXE, GRUB. See doc/uefi/iscsi.rst or<br>
<a href="https://www.xypron.de/u-boot/uefi/iscsi.html" rel="noreferrer" target="_blank">https://www.xypron.de/u-boot/uefi/iscsi.html</a> .<br>
<br>
Then update-grub will take care of keeping your kernel and initramfs in<br>
sync.<br>
<br>
Best regards<br>
<br>
Heinrich<br>
<br>
> <br>
> i tried to add some more nic-id's inside broadcom.c, but with no<br>
> success: (<br>
> <a href="https://github.com/sd-hd/u-boot/blob/rpi4/drivers/net/phy/broadcom.c" rel="noreferrer" target="_blank">https://github.com/sd-hd/u-boot/blob/rpi4/drivers/net/phy/broadcom.c</a> )<br>
> <br>
> The 64bit armstub with network enabled inside the assembler, seems to<br>
> have no affect inside config.txt. (<br>
> <a href="https://github.com/raspberrypi/tools/blob/master/armstubs/armstub8.S" rel="noreferrer" target="_blank">https://github.com/raspberrypi/tools/blob/master/armstubs/armstub8.S</a> )<br>
> <br>
> My experimental u-boot devicetree prints this below, but i don't know<br>
> how to enable the devices under the "scb - simple bus"...<br>
> <br>
> Maybe i can help testing for you ?<br>
> <br>
> U-Boot> dm tree<br>
> Class Index Probed Driver Name<br>
> -----------------------------------------------------------<br>
> root 0 [ + ] root_driver root_driver<br>
> simple_bus 0 [ + ] generic_simple_bus |-- soc<br>
> pinctrl 0 [ + ] bcm283x_pinctrl | |-- gpio@7e200000<br>
> pinconfig 0 [ ] pinconfig | | |-- dpi_gpio0<br>
> pinconfig 1 [ ] pinconfig | | |-- emmc_gpio22<br>
> pinconfig 2 [ ] pinconfig | | |-- emmc_gpio34<br>
> pinconfig 3 [ ] pinconfig | | |-- emmc_gpio48<br>
> pinconfig 4 [ ] pinconfig | | |-- gpclk0_gpio4<br>
> pinconfig 5 [ ] pinconfig | | |-- gpclk1_gpio5<br>
> pinconfig 6 [ ] pinconfig | | |-- gpclk1_gpio42<br>
> pinconfig 7 [ ] pinconfig | | |-- gpclk1_gpio44<br>
> pinconfig 8 [ ] pinconfig | | |-- gpclk2_gpio6<br>
> pinconfig 9 [ ] pinconfig | | |-- gpclk2_gpio43<br>
> pinconfig 10 [ ] pinconfig | | |-- i2c0_gpio0<br>
> pinconfig 11 [ ] pinconfig | | |-- i2c0_gpio28<br>
> pinconfig 12 [ ] pinconfig | | |-- i2c0_gpio44<br>
> pinconfig 13 [ ] pinconfig | | |-- i2c1_gpio2<br>
> pinconfig 14 [ ] pinconfig | | |-- i2c1_gpio44<br>
> pinconfig 15 [ ] pinconfig | | |-- jtag_gpio22<br>
> pinconfig 16 [ ] pinconfig | | |-- pcm_gpio18<br>
> pinconfig 17 [ ] pinconfig | | |-- pcm_gpio28<br>
> pinconfig 18 [ ] pinconfig | | |-- pwm0_gpio12<br>
> pinconfig 19 [ ] pinconfig | | |-- pwm0_gpio18<br>
> pinconfig 20 [ ] pinconfig | | |-- pwm0_gpio40<br>
> pinconfig 21 [ ] pinconfig | | |-- pwm1_gpio13<br>
> pinconfig 22 [ ] pinconfig | | |-- pwm1_gpio19<br>
> pinconfig 23 [ ] pinconfig | | |-- pwm1_gpio41<br>
> pinconfig 24 [ ] pinconfig | | |-- pwm1_gpio45<br>
> pinconfig 25 [ ] pinconfig | | |-- sdhost_gpio48<br>
> pinconfig 26 [ ] pinconfig | | |-- spi0_gpio7<br>
> pinconfig 27 [ ] pinconfig | | |-- spi0_gpio35<br>
> pinconfig 28 [ ] pinconfig | | |-- spi1_gpio16<br>
> pinconfig 29 [ ] pinconfig | | |-- spi2_gpio40<br>
> pinconfig 30 [ ] pinconfig | | |-- uart0_gpio14<br>
> pinconfig 31 [ ] pinconfig | | |--<br>
> uart0_ctsrts_gpio16<br>
> pinconfig 32 [ ] pinconfig | | |--<br>
> uart0_ctsrts_gpio30<br>
> pinconfig 33 [ ] pinconfig | | |-- uart0_gpio32<br>
> pinconfig 34 [ ] pinconfig | | |-- uart0_gpio36<br>
> pinconfig 35 [ ] pinconfig | | |--<br>
> uart0_ctsrts_gpio38<br>
> pinconfig 36 [ ] pinconfig | | |-- uart1_gpio14<br>
> pinconfig 37 [ ] pinconfig | | |--<br>
> uart1_ctsrts_gpio16<br>
> pinconfig 38 [ ] pinconfig | | |-- uart1_gpio32<br>
> pinconfig 39 [ ] pinconfig | | |--<br>
> uart1_ctsrts_gpio30<br>
> pinconfig 40 [ ] pinconfig | | |-- uart1_gpio40<br>
> pinconfig 41 [ ] pinconfig | | |--<br>
> uart1_ctsrts_gpio42<br>
> pinconfig 42 [ ] pinconfig | | |-- gpclk0_gpio49<br>
> pinconfig 43 [ ] pinconfig | | |-- gpclk1_gpio50<br>
> pinconfig 44 [ ] pinconfig | | |-- gpclk2_gpio51<br>
> pinconfig 45 [ ] pinconfig | | |-- i2c0_gpio46<br>
> pinconfig 46 [ ] pinconfig | | |-- i2c1_gpio46<br>
> pinconfig 47 [ ] pinconfig | | |-- i2c3_gpio2<br>
> pinconfig 48 [ ] pinconfig | | |-- i2c3_gpio4<br>
> pinconfig 49 [ ] pinconfig | | |-- i2c4_gpio6<br>
> pinconfig 50 [ ] pinconfig | | |-- i2c4_gpio8<br>
> pinconfig 51 [ ] pinconfig | | |-- i2c5_gpio10<br>
> pinconfig 52 [ ] pinconfig | | |-- i2c5_gpio12<br>
> pinconfig 53 [ ] pinconfig | | |-- i2c6_gpio0<br>
> pinconfig 54 [ ] pinconfig | | |-- i2c6_gpio22<br>
> pinconfig 55 [ ] pinconfig | | |-- i2c_slave_gpio8<br>
> pinconfig 56 [ ] pinconfig | | |-- jtag_gpio48<br>
> pinconfig 57 [ ] pinconfig | | |-- mii_gpio28<br>
> pinconfig 58 [ ] pinconfig | | |-- mii_gpio36<br>
> pinconfig 59 [ ] pinconfig | | |-- pcm_gpio50<br>
> pinconfig 60 [ ] pinconfig | | |-- pwm0_gpio52<br>
> pinconfig 61 [ ] pinconfig | | |-- pwm1_gpio53<br>
> pinconfig 62 [ ] pinconfig | | |-- rgmii_gpio35<br>
> pinconfig 63 [ ] pinconfig | | |-- rgmii_irq_gpio34<br>
> pinconfig 64 [ ] pinconfig | | |-- rgmii_irq_gpio39<br>
> pinconfig 65 [ ] pinconfig | | |--<br>
> rgmii_mdio_gpio28<br>
> pinconfig 66 [ ] pinconfig | | |--<br>
> rgmii_mdio_gpio37<br>
> pinconfig 67 [ ] pinconfig | | |-- spi0_gpio46<br>
> pinconfig 68 [ ] pinconfig | | |-- spi2_gpio46<br>
> pinconfig 69 [ ] pinconfig | | |-- spi3_gpio0<br>
> pinconfig 70 [ ] pinconfig | | |-- spi4_gpio4<br>
> pinconfig 71 [ ] pinconfig | | |-- spi5_gpio12<br>
> pinconfig 72 [ ] pinconfig | | |-- spi6_gpio18<br>
> pinconfig 73 [ ] pinconfig | | |-- uart2_gpio0<br>
> pinconfig 74 [ ] pinconfig | | |--<br>
> uart2_ctsrts_gpio2<br>
> pinconfig 75 [ ] pinconfig | | |-- uart3_gpio4<br>
> pinconfig 76 [ ] pinconfig | | |--<br>
> uart3_ctsrts_gpio6<br>
> pinconfig 77 [ ] pinconfig | | |-- uart4_gpio8<br>
> pinconfig 78 [ ] pinconfig | | |--<br>
> uart4_ctsrts_gpio10<br>
> pinconfig 79 [ ] pinconfig | | |-- uart5_gpio12<br>
> pinconfig 80 [ ] pinconfig | | |--<br>
> uart5_ctsrts_gpio14<br>
> pinconfig 81 [ ] pinconfig | | |-- dpi_18bit_gpio0<br>
> pinconfig 82 [ ] pinconfig | | |-- gpioout<br>
> pinconfig 83 [ ] pinconfig | | |-- alt0<br>
> pinconfig 84 [ ] pinconfig | | |-- spi0_pins<br>
> pinconfig 85 [ ] pinconfig | | |-- spi0_cs_pins<br>
> pinconfig 86 [ ] pinconfig | | |-- spi3_pins<br>
> pinconfig 87 [ ] pinconfig | | |-- spi3_cs_pins<br>
> pinconfig 88 [ ] pinconfig | | |-- spi4_pins<br>
> pinconfig 89 [ ] pinconfig | | |-- spi4_cs_pins<br>
> pinconfig 90 [ ] pinconfig | | |-- spi5_pins<br>
> pinconfig 91 [ ] pinconfig | | |-- spi5_cs_pins<br>
> pinconfig 92 [ ] pinconfig | | |-- spi6_pins<br>
> pinconfig 93 [ ] pinconfig | | |-- spi6_cs_pins<br>
> pinconfig 94 [ ] pinconfig | | |-- i2c0<br>
> pinconfig 95 [ ] pinconfig | | |-- i2c1<br>
> pinconfig 96 [ ] pinconfig | | |-- i2c3<br>
> pinconfig 97 [ ] pinconfig | | |-- i2c4<br>
> pinconfig 98 [ ] pinconfig | | |-- i2c5<br>
> pinconfig 99 [ ] pinconfig | | |-- i2c6<br>
> pinconfig 100 [ ] pinconfig | | |-- i2s<br>
> pinconfig 101 [ + ] pinconfig | | |-- sdio_pins<br>
> pinconfig 102 [ ] pinconfig | | |-- bt_pins<br>
> pinconfig 103 [ ] pinconfig | | |-- uart0_pins<br>
> pinconfig 104 [ + ] pinconfig | | |-- uart1_pins<br>
> pinconfig 105 [ ] pinconfig | | |-- uart2_pins<br>
> pinconfig 106 [ ] pinconfig | | |-- uart3_pins<br>
> pinconfig 107 [ ] pinconfig | | |-- uart4_pins<br>
> pinconfig 108 [ ] pinconfig | | |-- uart5_pins<br>
> pinconfig 109 [ ] pinconfig | | |-- audio_pins<br>
> gpio 0 [ ] gpio_bcm2835 | | `-- gpio_bcm2835<br>
> serial 0 [ ] bcm283x_pl011 | |-- serial@7e201000<br>
> serial 1 [ + ] serial_bcm283x_mu | |-- serial@7e215040<br>
> mmc 0 [ + ] sdhci-bcm2835 | |-- emmc2@7e340000<br>
> blk 0 [ + ] mmc_blk | | `--<br>
> emmc2@7e340000.blk<br>
> mmc 1 [ + ] sdhci-bcm2835 | |-- mmcnr@7e300000<br>
> blk 1 [ ] mmc_blk | | `--<br>
> mmcnr@7e300000.blk<br>
> video 0 [ + ] bcm2835_video | `-- fb<br>
> vidconsole 0 [ + ] vidconsole0 | `-- fb.vidconsole0<br>
> simple_bus 1 [ ] generic_simple_bus |-- clocks<br>
> clk 0 [ ] fixed_rate_clock | |-- clock@3<br>
> clk 1 [ ] fixed_rate_clock | `-- clock@4<br>
> simple_bus 2 [ ] generic_simple_bus |-- v3dbus<br>
> simple_bus 3 [ ] generic_simple_bus |-- scb<br>
> clk 2 [ ] fixed_rate_clock |-- clock@3<br>
> clk 3 [ ] fixed_rate_clock `-- clock@4<br>
> U-Boot><br>
> PM_RSTS: 0x00001000<br>
> RPi: BOOTLOADER release VERSION:b6a7593d Nov 18 2019 11:06:57 BOOTMODE:<br>
> 0x00000006 part: 0 BUILD_TIMESTAMP=1574075215 0xe56706c5 0x00c03111<br>
> <br>
> <br>
> Regards,<br>
> Sascha<br>
> <br>
> <br>
> <br>
> Am Mo., 18. Nov. 2019 um 18:14 Uhr schrieb Matthias Brugger<br>
> <<a href="mailto:mbrugger@suse.com" target="_blank">mbrugger@suse.com</a> <mailto:<a href="mailto:mbrugger@suse.com" target="_blank">mbrugger@suse.com</a>>>:<br>
> <br>
> HI Sascha,<br>
> <br>
> On 18/11/2019 10:24, Sascha Dewald wrote:<br>
> > Hi Matthias,<br>
> ><br>
> > sorry for mention you directly.<br>
> ><br>
> > I successfully boot the raspberry pi 4 over network, but have<br>
> problems to<br>
> > load the initrd.img over tftp.<br>
> ><br>
> <br>
> You do that through the PXE boot from the FW, right?<br>
> <br>
> > Do you know where i can get help, to enable scb & genet, so that<br>
> u-boot<br>
> > detect the network interface ?<br>
> ><br>
> <br>
> I know that there is someone working on the driver and we should<br>
> expect a first<br>
> working version before end of the year. I was just checking on that<br>
> today :)<br>
> <br>
> Regards,<br>
> Matthias<br>
> <br>
> <br>
> _______________________________________________<br>
> U-Boot-Board-Maintainers mailing list<br>
> <a href="mailto:U-Boot-Board-Maintainers@lists.denx.de" target="_blank">U-Boot-Board-Maintainers@lists.denx.de</a><br>
> <a href="https://lists.denx.de/listinfo/u-boot-board-maintainers" rel="noreferrer" target="_blank">https://lists.denx.de/listinfo/u-boot-board-maintainers</a><br>
> <br>
</blockquote></div>
</div></div>