[U-Boot-Users] Help, how do I decouple the reset address from the hw config word on ppc82xx

[Mark Doherty]

> Hi, 
> 
> I've been attempting to build u-boot to run on an embedded planet ep8260
> board reasonably sucessfully, however my board profile has flash starting
> at  0xFF000000, the reset vector is of course at 0xFFF00100. I've been
> scanning the code and build files looking for a reference to decouple the
> hardware configuration word at 0xFF00000 and the reset vector at
> 0xFFF00100 so far with no real sucess. 
> 
> Is there a mechanism within the build to do this?
> 
> Thx, I hope this makes sense.
> 
> Mark Doherty
> **************************************
> arca technologies
> 2 Trench Road
> Mallusk, Belfast
> Northern Ireland
> BT36 4TY
> **************************************
>