[U-Boot-Users] Ramdisk mount problem on smdk2410(s3c2410)...

[Yeonsik Jeong]

Dear,
 
 I am sorry to post the same message repeatedly, because of MIME format.
 
 I am using u-boot-0.4.0 + linux-2.4.18-rmk7-swl8 + self-made ramdisk on smdk2410(s3c2410
cpu) board.
 
 Kernel is being successfully uncompressed and booted, but ramdisk isn't mounted.
 My ramdisk is tested well on the same board and kernel without u-boot.
 Ramdisk seems not to be loaded before uncompressing the kernel.
 
 The address where the kernel is being performed is 0x30f00000 and ramdisk's is at
0x30800000.
 
 System logs are as follows.
 
Thank you in advance.
 
 Yeonsik Jeong
 
 ***********************************************************************************
 
 SMDK2410 # bootm 30100000 30200000
 
 ## Booting image at 30100000 ...
 Image Name: 2.4.18-rmk7-swl8 for SMDK2410
 Created: 2003-09-05 9:22:00 UTC
 Image Type: ARM Linux Kernel Image (gzip compressed)
 Data Size: 630413 Bytes = 615.6 kB
 Load Address: 30f00000
 Entry Point: 30f00000
 Verifying Checksum ... OK
 Uncompressing Kernel Image ... OK
 
 ## Loading Ramdisk Image at 30200000 ...
 Image Name: Ramdisk Image for ARM
 Created: 2003-09-05 12:02:05 UTC
 Image Type: ARM Linux RAMDisk Image (gzip compressed)
 Data Size: 1993960 Bytes = 1.9 MB
 Load Address: 30800000
 Entry Point: 30800000
 Verifying Checksum ... OK
 
     => There is no "Loading Ramdisk ... OK" message... 
 
 Starting kernel ...
 
 ￠®ⓒªUncompressing Linux............................................. done, booting the
kernel.
 Linux version 2.4.18-rmk7-swl8 (root at ad...) (gcc version 2.95.3 20010315
(release)) #1 2003. 09. 05. (¡¾Y) 18:06:47 KST
 
 CPU: SAMSUNG S3C2410(Arm920T)sid(wb) revision 0
 Machine: SAMSUNG ELECTRONICS Co., Ltd
 Warning: bad configuration page, trying to continue
 On node 0 totalpages: 16384
 zone(0): 16384 pages.
 zone(1): 0 pages.
 zone(2): 0 pages.
 Kernel command line: root=/dev/ram0 console=ttyS0
 Console: colour dummy device 80x30
 Calibrating delay loop... 101.37 BogoMIPS
 Memory: 64MB = 64MB total
 Memory: 52684KB available (1169K code, 304K data, 68K init)
 Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
 Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
 POSIX conformance testing by UNIFIX
 Linux NET4.0 for Linux 2.4
 Based upon Swansea University Computer Society NET3.039
 Initializing RT netlink socket
 Starting kswapd
 JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
 l3 S3C2410 Adapter Initialized 
 ttyS0 at MEM 0xe0000000 (irq = 52) is a S3C2410
 ttyS1 at MEM 0xe0004000 (irq = 55) is a S3C2410
 Console: switching to colour frame buffer device 30x40
 Loading keyboard on irq 1 
 pty: 256 Unix98 ptys configured
 Loading S3C2410 Touch Screen Driver 
 Installing S3C2410 RTC 
 S3C Real Time Clock driver v1.00
 block: 128 slots per queue, batch=32
 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
 eth0: cs8900 rev J found at 0xf0000300 
 cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line
 cs89x0 media RJ-45, IRQ 37, programmed I/O, MAC 00:00:00:00:00:00
 loop: loaded (max 8 devices)
 S3C2410 UDA1341 / IIS initialized
 No NAND device found!!!
 usb.c: registered new driver hub
 usb-ohci.c: USB OHCI at membase 0xd9000000, IRQ 26
 usb.c: new USB bus registered, assigned bus number 1
 hub.c: USB hub found
 hub.c: 2 ports detected
 mice: PS/2 mouse device common for all mice
 NET4: Linux TCP/IP 1.0 for NET4.0
 IP Protocols: ICMP, UDP, TCP
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 4096 bind 4096)
 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
 RAMDISK: Couldn't find valid RAM disk image starting at 0.
 Freeing initrd memory: 10240K
 cramfs: wrong magic
 JFFS: Trying to mount a non-mtd device.
 Kernel panic: VFS: Unable to mount root fs on 01:00