[U-Boot-Users] Environment in EEPROM on MPC5200 based board
Sebastian Schau
schau at MAZeT.de
Tue Dec 7 09:39:01 CET 2004
Hi all,
I'm using Lite5200 Board and tried to configure U-Boot to have
environment in EEPROM. I use Hard I2C driver an everything works fine
when the environment is in flash.
When setting CFG_ENV_IS_IN_EEPROM U-Boot don't start (hang-up before any
messages are printed on screen).
If anyone know something about this problem, any help is greatly
appreciated.
Thanks, Sebastian
More information about the U-Boot
mailing list