[U-Boot-Users] Uncompressing uImage error
Alireza Sadri
arsadri at yahoo.ca
Thu Dec 9 17:41:53 CET 2004
Hi all,
I am working on a custom board , I used U-Boot and
ported it, U-Boot is working well, and i compiled ELDK
to a uImage , with the command >make uImage.
here is the rest of the precedure:
er8260> tftp 10000 uImage
ARP broadcast 1
TFTP from server 10.10.0.187; our IP address is
10.10.0.185
Filename 'uImage'.
Load address: 0x10000
Loading:
#################################################################
#################################################################
##################
done
Bytes transferred = 757201 (b8dd1 hex)
er8260> bootm
## Booting image at 00010000 ...
Image Name: Linux-2.4.24-pre2
Created: 2004-12-07 22:25:46 UTC
Image Type: PowerPC Linux Kernel Image (gzip
compressed)
Data Size: 757137 Bytes = 739.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... Error: inflate()
returned -3
GUNZIP ERROR - must RESET board to recover
can anyone please help me? why is this happening?
(I read the FAQ , and searched mailing list for 200
last mails , by the phrase" GUNZIP uncompressing
error", i didn't find anything , hope it not to be a
FAQ and sorry if it is.)
Best regards.
sadri
__________________________________
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
http://info.mail.yahoo.com/mail_250
More information about the U-Boot
mailing list