[U-Boot-Users] flash.c
Ed Okerson
eokerson at texasconnect.net
Tue Jan 20 07:11:49 CET 2004
I would like to implement the functionality found in flash.c for many
boards for my board. There seems to be a lot of overlap between them. Is
there one that is better than others to start with as a base? My board
has a single Intel TE28F128 flash chip, is based on the AMD AU1500, and is
currently booting u-boot. I started by trying to modify the flash.c from
the a3000 board, but now after u-boot loads any command at the prompt
results in u-boot hanging. If I revert to the orginal flash.c I was using
from the dbau1x00 boards, commands work properly, but I lack the flash
commands.
Ed Okerson
More information about the U-Boot
mailing list