[U-Boot-Users] mpc8245 changed from u-boot-1.0.0 to uboot-1.0.2

[DeLaGarza, Robert]

Matthew S. McClintock wrote:
> Hi all,
> 	
> 	I've run into a problem on our board with the latest u-boot-1.0.2.
> Prior to this problem u-boot-1.0.0 worked flawlessly. So I am assuming
> the problem is from a change between those two versions. 
> 
> 	The problem is pretty simple, when u-boot is copying itself from flash
> to ram it does not get copied correctly. If I step through the copying
> of u-boot from flash to ram it copies fine, however if I let it copy at
> full speed it does not get copied correctly....


I've used U-Boot on the Artis SBC-A3000, which is based on the MPC8245. 
    I downloaded U-Boot 1.0.2 and compiled it with ELDK 2.0.2.  I was 
unable to recreate this problem--the board boots and starts Linux with 
no apparent problems.

-Robert