[U-Boot-Users] u-boot and bdi2000

[Kate Alhola]

Is there quick hint why u-boot does not start up when bdi2000 is 
connected to mpc5200 board.

problem is simple. I load my flash programming code ( rload ) to mpc5200 
internal sram
with bdi2000 and program u-boot to flash.  So, loading and running code 
works.
Then when i reset system and try start u-boot it hangs in initialization 
code but
if i remove bdi2000 it boots u-boot without problems.

The bdi2000 initializtion file  is based one from denx ftp server. I 
just ask, if this
is commonly known problem before spending any bit more time for it.

Kate