[U-Boot-Users] Building U-Boot with GCC3.4.0

[Jim McNamara]

> In message <PKEEJGHDPBIDKDLLBHPIMEHKCCAA.jmcnamara at kimble.ie> you wrote:
> > 
> > I've been able to get U-Boot to build and run successfully 
> using Linux and
> > m68k-elf-2.95.3.
> 
> That's an ancient toolchain...

What's the recommended version for use with U-Boot??

> 
> > What I'm trying to do now is build U-Boot in Cygwin using 
> m68k-elf-3.4.0.
> 
> You're dropping from one extreme into another.
> 
> > /home/JimMcNamara/u-boot-1.1.1/cpu/mcf52x2/start.S
> 
> And you're using  old  code.  Use  the  top-of-tree  version  in  CVS
> instead.
> 
> > I've looked at the mail archive and noticed that this problem has been
> > mentioned before, however I can't find any solution posted. Can 
> anyone give
> > me some pointers on how to resolve the problem??
> 
> Please try the current code; if the problem persists, you  will  need
> to fix it.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Your own mileage may vary.
>