[U-Boot-Users] .../board/fads/flash.c confuses me - give me a hint

[Nghiem, Tien]

I can return your question: why does the CFI exist?. Have a look at the u-boot-1.1.2/board/ppm8260/strataflash.c that is an example for a port that "only" uses the cfi_flash.c.

Good luck

Tien
-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Peter
Asemann
Sent: Wednesday, January 12, 2005 2:34 PM
To: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] .../board/fads/flash.c confuses me - give me
a hint


Nghiem, Tien wrote:

> Hi,
> 
> You can you use the CFI driver in /u-boot-1.1.1/drivers/cfi_flash.c. it's generic and working. I have used it with these boards: IceCube(MPC5200) and EP8260 without modification.

Ahh... thanks for the hint. But anyway... the u-boot readme says an own 
flash.c was a minimum requirement for a port. If the generic driver 
works, why do people write customs flash.c's at all? All modern flash 
chips seem to support CFI anyway. Is there an example for a port that 
"only" uses the cfi_flash.c so I can take a look on it?

Best regards,

Peter Asemann


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users