[U-Boot-Users] Kernel XIP
Wolfgang Denk
wd at denx.de
Thu Jun 16 14:23:26 CEST 2005
In message <DCAFE6B52143A24082BB128C3AEF61E07C70EF at BLR-EC-MBX03.wipro.com> you wrote:
>
> I configured for kernel XIP and created xipImage. When I tried to load
> it through u-boot, it complained about invalid magic number. Later I
> added a 64 byte header required for u-boot with the following mkimage
> command:
>
> mkimage -A arm -O linux -T kernel -C none -a 0x00080000 -e 0x00080040 -d
> xipImage XIPImage.
U-Boot does not provide direct support for XIP on ARM; the existing
code has only been tested on PowerPC.
> Any idea what is going wrong here ?
Search the ARM linux mailing list and you will find an extensive
discussion about all these issues.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
core error - bus dumped
More information about the U-Boot
mailing list