[U-Boot-Users] Question about MPC8272 HRCW

[Sam Song]

--- Yuli Barcohen <yuli at arabellasw.com> wrote:
[snip]
> For MONITOR_BASE=TEXT_ADDR=0xFFF00000 you need
> CFG_FLASH_BASE=0xFF800000. Check BDI initialisations
> and set the HRCW to get the same values.

Really? Sounds CFG_FLASH_BASE=0xFE000000 is also OK
for HIGH BOOT situation. Am I right?

Thanks,

Sam

__________________________________________________
赶快注册雅虎超大容量免费邮箱?
http://cn.mail.yahoo.com