[U-Boot-Users] Erase in UBoot

[Wolfgang Denk]

Hello,

in message <Pine.LNX.4.44.0506301844420.31031-100000 at bharathi.midascomm.com> you wrote:
> 
> We are using UBoot 1.0.0, During continuous 2nd erase operation, the
> no .of DOT is increased. I like to know whether this is something do
> with UBoot or flash chip or is it normal behavior ??

This is normal behaviour. The dots are printed  one  per  second,  so
they give an apprximation how long the erase takes. It is normal that
it  will  take longer and longer the older your flash gets (i. e. the
more rease cycles it has gone through)

> ROM # erase B0100000 B07FFFFF
> .............................................. done
> Erased 111 sectors
> ROM # erase B0100000 B07FFFFF
> ..................................................... done
> Erased 111 sectors
> ROM #

In this case the increase was approx.  15%  which  is  poretty  long;
either  your  flash  is  brand new (burn in phase) or it's pretty old
(near end of life)?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
On a clear disk you can seek forever.