[U-Boot-Users] U-Boot Manual Missing Examples

[Wolfgang Denk]

In message <55FC80459FE6F34091EFE3BC720AF7E709D0B4 at MNBM01-MAIL01.ad.gd-ais.com> you wrote:
> 
> I assume that the process is basically the same as booting Linux so I
> have been using Section 7 of the U-Boot manual at
> http://www.denx.de/wiki/view/DULG/BootingEmbeddedLinux as a reference.
> However, several of the examples of U-Boot command line inputs are
> missing from the sections on Booting from Flash Memory and Running
> Standalone with a RAM Disk.  

Chose a different board than  the  default  (tqm8xxl);  for  example,
chose any of the AMCC eval boards [use the "Board Select" link in the
left nav bar]. For example, select the "bamboo" board.

> Will these examples be added soon?  If not, is there another mailing
> list that deals with these issues?

The examples are there, for most of the boards. The  current  default
(tqm8xxl) is not quite up to date.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Don't tell me how hard you work.  Tell me how much you get done.
                                                     -- James J. Ling