[U-Boot-Users] does this situation can assert to be a hardware problem?

[zhuzhenhua]

On 11/24/05, Wolfgang Denk <wd at denx.de> wrote:
> In message <50c9a2250511232229t3f2e10e2m4af95ef4e53dbc39 at mail.gmail.com> you wrote:
> > in the u-boot, when run into board_init_r(lib_mips/board.c), sometimes
> > it stop at the call of mem_malloc_init, sometimes it stop at the call
> > of env_relocate.
> > does it means it maybe caused by hardware or uncorrect sdram init?, it
>
> Yes.
>
> > can not be the software ploblem of the board.c file?
>
> Yes, it can be  caused  by  incorrect  software  (like  a  bad  port,
                                                                      
 ~~~~~~~~~~~~~
                                                                      
you mean give a long address for io operation?

> incorrect hardware initialization), too.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> COMPONENT EQUIVALENCY NOTICE:  The  Subatomic  Particles  (Electrons,
> Protons,  etc.) Comprising This Product Are Exactly the Same in Every
> Measurable Respect as Those Used in the Products of Other  Manufactu-
> rers,  and  No Claim to the Contrary May Legitimately Be Expressed or
> Implied.
>

Best regards
zhuzhenhua