[U-Boot-Users] questions regarding entry point

[Burch, John T.]

The u-boot 1.1.4 README gives instructions for building a linux kernel
image that is bootable by u-boot's 'bootm' command.  My question is,
since the instructions have you convert the vmlinux (elf) to a flat
binary (linux.bin), how are you supposed to get the entry point to use
later during the 'mkimage' step?  The entry point is contained in the
elf image but that information will be lost when converted to binary.  I
can certainly determine the entry point manually and enter it in that
way.  But how about an automated way such that the steps from the README
can be put straight into the kernel Makefile?

John
============================================================
The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader
of this message is not the intended recipient, or an employee
or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any reproduction,
dissemination or distribution of this communication is strictly
prohibited. If you have received this communication in error,
please notify us immediately by replying to the message and
deleting it from your computer. Thank you. Tellabs
============================================================