[U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

[Marco Cavallini]

Erdmann, Thomas ha scritto:
>  
> Hello Wolfgang,
> that Information isn't new so i forgot to answer for this.
> If i set a #define CONFIG_SKIP_LOWLEVEL_INIT in the include/configs/at91rm9200dk.h
> ( and appending an #ifdef CONFIG_SKIP_LOWLEVEL_INIT around Function cpu_init_crit: in init.S to avoid an error message )the resulting u-boot.bin is a few Bytes shorter but it doesn't run after load by loader.bin, too.
> So i thought there must be another Setting, 
> CONFIG_BOOTBINFUNC was another Tip in Mail List but doesn't help too.
> I started a Request at Atmel, perhaps they will give a Patch or something else.
> 
> THX for your Help
>   Thomas

Actually you need some patches not yet applied
if you play with CONFIG_SKIP_LOWLEVEL_INIT and AT91.
Please see ML history.

Ciao
-- 
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com   |    www.KaeilOS.com