[U-Boot-Users] board config file problem

[Stefan Roese]

On Friday 24 November 2006 03:42, Zhao Tongyi wrote:
> I have my own board, so I can't choose board type from board dir.
> I have modified the most close board like HH405.h to compiled.but that
> isn't run at all.
> my board
> powerpc 405EP and itself two network chips,and two rl8139 clip,
> 32msdram ,
> 32m sumsung nand

Just a note: The HH405 board uses UART1 and _not_ UART0 as the U-Boot console. 
If this is not what you need you have to change the config file accordingly.

> I want to see the boot information from serial and get image from tftp
> how I config the board config file ?
> anyone give me a example ?

Porting U-Boot from one board to another is not always that simple. Deeper 
knowledge of U-Boot and of course of the new hardware is required.

Best regards,
Stefan