[U-Boot-Users] [PATCH 1/2] Add support for multiple I2C buses

Ben Warren bwarren at qstreams.com
Sat Sep 2 05:18:28 CEST 2006


Nishanth,

--- nishanth menon <menon.nishanth at gmail.com> wrote:

> On 9/1/06, Ben Warren <bwarren at qstreams.com> wrote:
> > > > +           CONFIG_HARD_I2C selects a hardware
> I2C controller.
> > > I guess I am slow abt this.... but !slow_i2c...
> is that not good enough?
> > > and I cant see any other part in the the common
> patch using it...
> > Sorry, I don't know what you're talking about. 
> What's slow_i2c?  I just
> > grepped the source and didn't find it anywhere.
> Voila, a typo :-) ! I should have stated soft_i2c.
> !CONFIG_SOFT_I2C
> should mean HARD_I2C.
> Regards,
> Nishanth Menon

OK... look a little more closely at the diff.  All I
did was change the word 'CPM' to 'hardware', because
nowadays there are many more I2C controllers than the
ones in QUICC engines.  I was just cleaning up
documentation, and didn't change any code regarding
either HARD_I2C or SOFT_I2C.

Sorry for the confusion,
Ben






More information about the U-Boot mailing list