[U-Boot-Users] [PATCH 0/11] MPC85xx platform updates
joakim.tjernlund at transmode.se
Wed Sep 27 19:09:42 CEST 2006
> On Tue 27 Jun 21:34 CEST 2006, Matthew McClintock wrote:
> > The following is a series of patches to update the MPC85xx
> platforms. It
> > changes the method flat device trees are stored/obtained by
> U-Boot. With
> > these patches, U-Boot will update and boot from a flat device tree
> > stored in memory.
> I needed to do this in U-Boot 1.1.4 for an MPC83xx based board, so I
> backported the relevant parts of that patch series. In case
> someone else
> would find it useful, I've attached the resulting patch to this mail.
> And in case someone feels like taking a look at the patch,
> comments are
> Cheers // Fredrik Roubert
I too am working with a mpc83xx(8323) based board and I am struggling
getting the ethernet drivers working and I can't find out why only
and the other two(UCC2 and UCC4) dosn't. I wonder why you had modify the
flat tree stuff
to get your board working? Is the current impl. buggy?
More information about the U-Boot