[U-Boot-Users] [PATCH] ARM: add support of CONFIG_LAST_STAGE_INIT for arm

[Michael Schwingen]

Haavard Skinnemoen wrote:
> It should probably initialize the PHY interface (i.e. the MDIO
> interface) early, but I agree that it should delay initializing the
> actual PHY until it is needed.
>   
That may depend on board/PHY: on some PHYs, the LED pin functions need 
to be set in software, so on power-up the ethernet LEDs may light up and 
display bogus states, so I would prefer to configure that early, even if 
the port is not used.

cu
Michael