[U-Boot-Users] [PATCH 0/4] PPC4xx: Add board-independent support for DDR2 SPD DIMMs on 440EPx/GRx

Stefan Roese sr at denx.de
Mon Dec 17 17:31:23 CET 2007


Larry,

On Thursday 25 October 2007, Larry Johnson wrote:
> Summary:
>
>  board/amcc/sequoia/sdram.h   |    4 +-
>  board/lwmon5/sdram.h         |    4 +-
>  cpu/ppc4xx/Makefile          |   31 +-
>  cpu/ppc4xx/denali_data_eye.c |  396 +++++++++++++
>  cpu/ppc4xx/denali_spd_ddr2.c | 1276
> ++++++++++++++++++++++++++++++++++++++++++ include/ppc440.h             | 
> 514 +++++++++++++++--
>  6 files changed, 2167 insertions(+), 58 deletions(-)
>
> This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
> controller.  It should also work on the 440GRx.  It is based on the DDR2
> SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
> It also takes EPx/GRx SDRAM definitions and support code that are
> specific to the Sequoia/Rainier and lwmon5 boards, and copies them to
> general 4xx directories.  (Neither Stefan nor I are happy with the names
> of the two new files, so suggestions are welcome!)

I'm (finally) trying to integrate your patches into the u-boot-ppc4xx 
custodian repository for upstream merge. Unfortunately my repo changed quite 
a bit lately and your patches don't apply anymore. So could you please rebase 
this patchset against the "for-1.3.2" branch of the 4xx repo:

http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot/u-boot-ppc4xx.git;a=shortlog;h=for-1.3.2

I promise to commit soon so that you don't have to rework again.

Unfortunately this is valid also for these patchsets too:

[U-Boot-Users] [PATCH 1/2 (resubmit)] PPC4xx: Cosmetic changes

[U-Boot-Users] [PATCH 1/4 resubmit] Add driver for National Semiconductor LM73 
temperature sensor (with your Korat board support)

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================




More information about the U-Boot mailing list