[U-Boot-Users] ne2000 compile error

Vlad Lungu vlad at comsys.ro
Fri Apr 11 16:57:08 CEST 2008


Shinya Kuribayashi wrote:
[BIG SNIP]
> Git bisect has picked up the following commit:
>
> ----------------------------------------------------------------
> commit e710185aae90c64d39c2d453e40e58ceefe4f250
> Author: goda.yusuke <goda.yusuke at renesas.com>
> Date:   Wed Mar 5 17:08:20 2008 +0900
>
>     net: Divided code of NE2000 ethernet driver
>     
>     There are more devices of the NE2000 base.
>     A present code is difficult for us to support more devices.
>     To support more NE2000 clone devices, separated the function.
>     
>     Signed-off-by: Yusuke Goda <goda.yusuke at renesas.com>
>     Acked-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
>
> ----------------------------------------------------------------
>
> I tried to fix the problem, but tha patch is a little complicated.
>   
Fixed it for now. #ifndef CONFIG_DRIVER_AX88796 could be replaced with 
something a little more generic
like a CFG_CUSTOM_GET_PROM_NE2000 or something. Or the code could be 
implemented in a .c file and the
generic get_prom() could be made weak. I think that implementing 
non-static, non-inlined functions in header files
is bad style. Breaking existing code in the process is even worse.

Vlad


Signed-off-by: Vlad Lungu <vlad at comsys.ro>
---
 drivers/net/ax88796.h     |    4 +-
 drivers/net/ne2000.c      |   91 
+++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ne2000.h      |   86 
+------------------------------------------
 drivers/net/ne2000_base.h |    2 +-
 4 files changed, 95 insertions(+), 88 deletions(-)

diff --git a/drivers/net/ax88796.h b/drivers/net/ax88796.h
index 069ae80..4262648 100644
--- a/drivers/net/ax88796.h
+++ b/drivers/net/ax88796.h
@@ -202,7 +202,7 @@ static void ax88796_mac_read(u8 *buff)
     }
 }
 
-int get_prom(u8* mac_addr)
+hw_info_t * get_prom(u8* mac_addr)
 {
     u8 prom[32];
     int i;
@@ -211,7 +211,7 @@ int get_prom(u8* mac_addr)
     for (i = 0; i < 6; i++){
         mac_addr[i] = prom[i];
     }
-    return 1;
+    return (void *)1;
 }
 
 #endif /* __DRIVERS_AX88796L_H__ */
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index 99baeea..aad27dc 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -125,6 +125,9 @@ dp83902a_init(void)
     dp83902a_priv_data_t *dp = &nic;
     u8* base;
 
+#if defined(NE2000_BASIC_INIT)
+    int i;
+#endif
     DEBUG_FUNCTION();
 
     base = dp->base;
@@ -738,6 +741,94 @@ u8 dev_addr[6];
 #define PCNET_RESET    0x1f    /* Issue a read to reset, a write to 
clear. */
 #define PCNET_MISC    0x18    /* For IBM CCAE and Socket EA cards */
 
+#ifndef CONFIG_DRIVER_AX88796L
+static void pcnet_reset_8390(void)
+{
+    int i, r;
+
+    PRINTK("nic base is %lx\n", nic_base);
+
+    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
+    n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
+    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
+    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+
+    n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
+
+    for (i = 0; i < 100; i++) {
+        if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+            break;
+        PRINTK("got %x in reset\n", r);
+        udelay(100);
+    }
+    n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
+
+    if (i == 100)
+        printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
+
+hw_info_t * get_prom(u8* mac_addr)
+{
+    u8 prom[32];
+    int i, j;
+    struct {
+        u_char value, offset;
+    } program_seq[] = {
+        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+        {0x48,  EN0_DCFG},        /* Set byte-wide (0x48) access. */
+        {0x00,  EN0_RCNTLO},        /* Clear the count regs. */
+        {0x00,  EN0_RCNTHI},
+        {0x00,  EN0_IMR},        /* Mask completion irq. */
+        {0xFF,  EN0_ISR},
+        {E8390_RXOFF, EN0_RXCR},    /* 0x20  Set to monitor */
+        {E8390_TXOFF, EN0_TXCR},    /* 0x02  and loopback mode. */
+        {32,    EN0_RCNTLO},
+        {0x00,  EN0_RCNTHI},
+        {0x00,  EN0_RSARLO},        /* DMA starting at 0x0000. */
+        {0x00,  EN0_RSARHI},
+        {E8390_RREAD+E8390_START, E8390_CMD},
+    };
+
+    PRINTK ("trying to get MAC via prom reading\n");
+
+    pcnet_reset_8390 ();
+
+    mdelay (10);
+
+    for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
+        n2k_outb (program_seq[i].value, program_seq[i].offset);
+
+    PRINTK ("PROM:");
+    for (i = 0; i < 32; i++) {
+        prom[i] = n2k_inb (PCNET_DATAPORT);
+        PRINTK (" %02x", prom[i]);
+    }
+    PRINTK ("\n");
+    for (i = 0; i < NR_INFO; i++) {
+        if ((prom[0] == hw_info[i].a0) &&
+            (prom[2] == hw_info[i].a1) &&
+            (prom[4] == hw_info[i].a2)) {
+            PRINTK ("matched board %d\n", i);
+            break;
+        }
+    }
+    if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+        PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
+        PRINTK ("MAC address is ");
+        for (j = 0; j < 6; j++) {
+            mac_addr[j] = prom[j << 1];
+            PRINTK ("%02x:", mac_addr[i]);
+        }
+        PRINTK ("\n");
+        return (i < NR_INFO) ? hw_info+i : &default_info;
+    }
+    return NULL;
+}
+#endif
+
 u32 nic_base;
 
 /* U-boot specific routines */
diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
index d324a00..4a540c7 100644
--- a/drivers/net/ne2000.h
+++ b/drivers/net/ne2000.h
@@ -81,6 +81,7 @@ are GPL, so this is, of course, GPL.
 
 #define DP_DATA     0x10
 #define START_PG    0x50    /* First page of TX buffer */
+#define START_PG2   0x48
 #define STOP_PG     0x80    /* Last page +1 of RX ring */
 
 #define RX_START    0x50
@@ -91,89 +92,4 @@ are GPL, so this is, of course, GPL.
 #define DP_IN_DATA(_b_, _d_)  (_d_) = *( (vu_char *) ((_b_)))
 #define DP_OUT_DATA(_b_, _d_) *( (vu_char *) ((_b_))) = (_d_)
 
-static void pcnet_reset_8390(void)
-{
-    int i, r;
-
-    PRINTK("nic base is %lx\n", nic_base);
-
-    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
-    n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
-    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
-    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-    PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, 
n2k_inb(E8390_CMD));
-    n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-
-    n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-
-    for (i = 0; i < 100; i++) {
-        if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
-            break;
-        PRINTK("got %x in reset\n", r);
-        udelay(100);
-    }
-    n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-
-    if (i == 100)
-        printf("pcnet_reset_8390() did not complete.\n");
-} /* pcnet_reset_8390 */
-
-int get_prom(u8* mac_addr)
-{
-    u8 prom[32];
-    int i, j;
-    struct {
-        u_char value, offset;
-    } program_seq[] = {
-        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
-        {0x48,  EN0_DCFG},        /* Set byte-wide (0x48) access. */
-        {0x00,  EN0_RCNTLO},        /* Clear the count regs. */
-        {0x00,  EN0_RCNTHI},
-        {0x00,  EN0_IMR},        /* Mask completion irq. */
-        {0xFF,  EN0_ISR},
-        {E8390_RXOFF, EN0_RXCR},    /* 0x20  Set to monitor */
-        {E8390_TXOFF, EN0_TXCR},    /* 0x02  and loopback mode. */
-        {32,    EN0_RCNTLO},
-        {0x00,  EN0_RCNTHI},
-        {0x00,  EN0_RSARLO},        /* DMA starting at 0x0000. */
-        {0x00,  EN0_RSARHI},
-        {E8390_RREAD+E8390_START, E8390_CMD},
-    };
-
-    PRINTK ("trying to get MAC via prom reading\n");
-
-    pcnet_reset_8390 ();
-
-    mdelay (10);
-
-    for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
-        n2k_outb (program_seq[i].value, program_seq[i].offset);
-
-    PRINTK ("PROM:");
-    for (i = 0; i < 32; i++) {
-        prom[i] = n2k_inb (PCNET_DATAPORT);
-        PRINTK (" %02x", prom[i]);
-    }
-    PRINTK ("\n");
-    for (i = 0; i < NR_INFO; i++) {
-        if ((prom[0] == hw_info[i].a0) &&
-            (prom[2] == hw_info[i].a1) &&
-            (prom[4] == hw_info[i].a2)) {
-            PRINTK ("matched board %d\n", i);
-            break;
-        }
-    }
-    if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
-        PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
-        PRINTK ("MAC address is ");
-        for (j = 0; j < 6; j++) {
-            mac_addr[j] = prom[j << 1];
-            PRINTK ("%02x:", mac_addr[i]);
-        }
-        PRINTK ("\n");
-        return (i < NR_INFO) ? i : 0;
-    }
-    return NULL;
-}
 #endif /* __DRIVERS_NE2000_H__ */
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
index 1badf62..18dc5fe 100644
--- a/drivers/net/ne2000_base.h
+++ b/drivers/net/ne2000_base.h
@@ -120,7 +120,7 @@ typedef struct dp83902a_priv_data {
  ------------------------------------------------------------------------
  Some forward declarations
 */
-int get_prom( u8* mac_addr);
+hw_info_t * get_prom( u8* mac_addr);
 static void dp83902a_poll(void);
 
 /* 
------------------------------------------------------------------------ */
-- 
1.5.4






More information about the U-Boot mailing list