[U-Boot-Users] [PATCH v2] IDE: fix bug in reset sequence

[Wolfgang Denk]

In message <20080404130906.24594.85188.stgit at tq-sewsrv-4.tq-net.de> you wrote:
> According to the ata (ata5) specification the RESET- signal
> shall be asserted for at least 25 us. Without this patch,
> the RESET- signal is asserted on some boards for only < 1 us
> (e. g. on the TQM5200). This patch adds a general delay of
> 25 us to the RESET- signal.

Already applied.

If you want to send follow-ups to previous postings. please make sure
to keep the reference information intact. As is, it was impossible to
me to see that this message belonged to a previous posting (and, even
worse, I didn't see that there was a follow-up to the one I checked
in).

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Obviously, a major malfunction has occurred."
              -- Steve Nesbitt, voice of Mission Control, January 28,
                 1986, as the shuttle Challenger exploded within view
                 of the grandstands.