[U-Boot] [PATCH] QE UEC: Fix compiler warnings

[Ben Warren]

Moved static functions earlier in file so forward declarations are not needed.

Signed-off-by: Ben Warren <biggerbadderben at gmail.com>
---

This requires the patch "QE UEC: Add MII Commands"
Added directly to net tree

 drivers/qe/uec.c |   69 +++++++++++++++++++++++++----------------------------
 1 files changed, 33 insertions(+), 36 deletions(-)

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 049a74d..ba89247 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -130,10 +130,6 @@ static uec_info_t eth4_uec_info = {
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
-static int uec_miiphy_read(char *devname, unsigned char addr,
-			    unsigned char reg, unsigned short *value);
-static int uec_miiphy_write(char *devname, unsigned char addr,
-			     unsigned char reg, unsigned short value);
 u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
 void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
 
@@ -641,6 +637,39 @@ static void phy_change(struct eth_device *dev)
 	adjust_link(dev);
 }
 
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value)
+{
+	*value = uec_read_phy_reg(devlist[0], addr, reg);
+
+	return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value)
+{
+	uec_write_phy_reg(devlist[0], addr, reg, value);
+
+	return 0;
+}
+
+#endif
+
 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
 {
 	uec_t		*uec_regs;
@@ -1378,37 +1407,5 @@ int uec_initialize(int index)
 	return 1;
 }
 
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
-	&& !defined(BITBANGMII)
-
-/*
- * Read a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-static int uec_miiphy_read(char *devname, unsigned char addr,
-			    unsigned char reg, unsigned short *value)
-{
-	*value = uec_read_phy_reg(devlist[0], addr, reg);
-
-	return 0;
-}
-
-/*
- * Write a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-static int uec_miiphy_write(char *devname, unsigned char addr,
-			     unsigned char reg, unsigned short value)
-{
-	uec_write_phy_reg(devlist[0], addr, reg, value);
-
-	return 0;
-}
-
-#endif
 
 #endif /* CONFIG_QE */
-- 
1.5.4.3