[U-Boot] [PATCH 09/13] drivers/qe: Move conditional compilation to Makefile

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Tue Aug 12 23:51:42 CEST 2008


Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 drivers/qe/Makefile  |    3 ++-
 drivers/qe/qe.c      |    3 ---
 drivers/qe/uccf.c    |    2 --
 drivers/qe/uec.c     |    5 -----
 drivers/qe/uec_phy.c |    3 ---
 5 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index 45a2fff..18fe9ce 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)qe.a
 
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS	:= qe.o uccf.o uec.o uec_phy.o $(COBJS-y)
+COBJS-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 7b6ecd7..e914d01 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -27,7 +27,6 @@
 #include "asm/immap_qe.h"
 #include "qe.h"
 
-#if defined(CONFIG_QE)
 qe_map_t		*qe_immr = NULL;
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 
@@ -466,5 +465,3 @@ U_BOOT_CMD(
 	"fw <addr> [<length>] - Upload firmware binary at address <addr> to "
 		"the QE,\n\twith optional length <length> verification.\n"
 	);
-
-#endif /* CONFIG_QE */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 4a327ab..7f6337b 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -28,7 +28,6 @@
 #include "qe.h"
 #include "uccf.h"
 
-#if defined(CONFIG_QE)
 void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
 {
 	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
@@ -401,4 +400,3 @@ int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t  **uccf_ret)
 	*uccf_ret = uccf;
 	return 0;
 }
-#endif /* CONFIG_QE */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index ba89247..344c649 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -31,8 +31,6 @@
 #include "uec_phy.h"
 #include "miiphy.h"
 
-#if defined(CONFIG_QE)
-
 #ifdef CONFIG_UEC_ETH1
 static uec_info_t eth1_uec_info = {
 	.uf_info		= {
@@ -1406,6 +1404,3 @@ int uec_initialize(int index)
 
 	return 1;
 }
-
-
-#endif /* CONFIG_QE */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 423ba78..186922e 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -26,8 +26,6 @@
 #include "uec_phy.h"
 #include "miiphy.h"
 
-#if defined(CONFIG_QE)
-
 #define ugphy_printk(format, arg...)  \
 	printf(format "\n", ## arg)
 
@@ -677,4 +675,3 @@ void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
 	marvell_phy_interface_mode (dev, mode);
 #endif
 }
-#endif /* CONFIG_QE */
-- 
1.5.6.2




More information about the U-Boot mailing list