[U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)

[Prafulla Wadaskar]

Hi Jean,
First of all sorry for late feedback
Thanks for your help.
I tried to apply the above patch but it has lot of diff,
On the other thread I have migrated to latest u-boot version and the problem got resolved :-)
I think your patch is mainlined.

But I am facing now new problem...
The earlier I was using u-boot ver 1.1.6 and my nand driver was working fine.
With migration to latest u-boot I am always getting bad block errors (Skipping bad block 0x????)

What could be the problem?

Regards..
Prafulla. . 

 

> -----Original Message-----
> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com] 
> Sent: Sunday, November 23, 2008 5:57 AM
> To: Prafulla Wadaskar; u-boot at lists.denx.de
> Subject: Re: [U-Boot] U-boot build failes 
> witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)
> 
> On 13:06 Wed 19 Nov     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 03:10 Wed 19 Nov     , Prafulla Wadaskar wrote:
> > > Hi
> > > I am using u-boot-1.1.6 and building u-boot from my new 
> board which 
> > > includes nand flash support
> > > 
> > > If I build using armv5tel-reghat-linux-gnueabi-gcc 
> (4.1.2) toolchain 
> > > it gives build failure with below log
> > > 
> > >                         --start-group 
> lib_generic/libgeneric.a board/Marvell/rd6281/librd6281.a 
> cpu/arm926ejs/libarm926ejs.a 
> cpu/arm926ejs/feroceon/libferoceon.a lib_arm/libarm.a 
> fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a 
> fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a 
> fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a 
> dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a 
> drivers/nand_legacy/libnand_legacy.a 
> drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a 
> common/libcommon.a --end-group -L 
> /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2 -lgcc \
> > >                         -Map u-boot.map -o u-boot
> > > 
> /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_div
di3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
> > > 
> /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_udi
vdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
> > > make: *** [u-boot] Error 1
> > > 
> > > Whereas,
> > > If I build the same code using codesoucery toolchain 
> (arm2008q1) release (gcc ver 4.2.3) the build is sucessfull.
> > > 
> > > I want to go ahead with armv5tel-reghat-linux-gnueabi-gcc (4.1.2) 
> > > Can someone suggest what is problem and how should I proceed?
> > update the divdi3 and _udivdi3 implementation
> > 
> > I'll said
> > 
> > so please try this patch
> > 
> > please note I've just test it on one board
> > 
> > Best Regards,
> > J.
> 
> Any news?
> 
> Best Regards,
> J.
>