[U-Boot-Users] [PATCH] MPC85xx: Change traps.c to not reference non-addressable memory

[Kim Phillips]

On Wed, 14 May 2008 15:31:43 -0500
Becky Bruce <becky.bruce at freescale.com> wrote:

> 
> On May 14, 2008, at 1:57 PM, Kim Phillips wrote:
> > On Wed, 14 May 2008 13:10:04 -0500
> > becky.bruce at freescale.com wrote:
> >
> >> From: Becky Bruce <becky.bruce at freescale.com>
> >>
> >> Currently, END_OF_RAM is used by the trap code to determine if
> >> we should attempt to access the stack pointer or not. However,
> >> on systems with a lot of RAM, only a subset of the RAM is
> >> guaranteed to be mapped in and accessible.  Change END_OF_RAM
> >> to use get_effective_memsize() instead of using the raw ram
> >> size out of the bd.
> >>
> >> Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
> >> ---
> >
> > what, no love for 4xx, 83xx, and 74xx_7xx?
> 
> The other platforms currently set a hard limit that should still be  
> valid - I just changed the ones that were reading memsize directly  
> out of the bd.
> 
sure, 5xx, 82xx and 8xx are hardcoded, but 74xx_7xx (albeit only
AMIGAONE), all 83xx, and all 4xx use the bd just like in your current
patchseries.  I'm just trying to maintain some level of consistency.

> > can also be made a single patch for WD to apply directly.
> >
> 
> Sure, I just split it up in case there was some reason we shouldn't  
> do it for one of them.

ah, I thought you wanted individual maintainers to pick them up
individually.  Either way works, really.

Kim