[U-Boot] Pull Request: u-boot-mpc86xx

[Wolfgang Denk]

Dear Jon Loeliger,

In message <1226334502.18091.6.camel at ld0161-tx32> you wrote:
> The following changes since commit 1378174a1351c0285736863a665ab758fe8d5f71:
>   Wolfgang Denk (1):
>         Merge branch 'master' of /home/wd/git/u-boot/custodians
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-mpc86xx.git masterges since commit 
> 
> Becky Bruce (18):
>       mpc8641: Stop supporting non-PCI_PNP configs
>       mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
>       powerpc 86xx: Handle CCSR relocation earlier
>       86xx: Make dram_size a phys_size_t
>       8641HPCN: Config file cleanup
>       powerpc: change 86xx SMP boot method
>       mpc8641: Remove extra "0" from BR2 define
>       mpc86xx: Move setup_bats into cpu_init_f
>       mpc8641: only define CONFIG_ENV_SIZE once
>       mpc8641: Drop imaginary second flash bank, map 8MB
>       mpc8641: make DIAG_ADDR == FLASH_BASE
>       mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
>       mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
>       mpc8641: Change 32-bit memory map
>       mpc8641: Support 36-bit physical addressing
>       toplevel Makefile: Add MPC8641HPCN_36BIT target
>       mpc8641: Try to detect old .dts files
>       lib_ppc: Move trap_init to occur earlier
> 
> Jon Loeliger (1):
>       Merge commit 'wd/master'
> 
>  Makefile                                  |    8 +-
>  board/freescale/mpc8610hpcd/mpc8610hpcd.c |    6 +-
>  board/freescale/mpc8641hpcn/config.mk     |    2 +-
>  board/freescale/mpc8641hpcn/law.c         |   35 ++--
>  board/freescale/mpc8641hpcn/mpc8641hpcn.c |   66 ++++---
>  cpu/mpc86xx/Makefile                      |    4 +
>  cpu/mpc86xx/cpu_init.c                    |    8 +
>  cpu/mpc86xx/fdt.c                         |   21 ++
>  cpu/mpc86xx/mp.c                          |   68 +++++++
>  cpu/mpc86xx/mp.h                          |    7 +
>  cpu/mpc86xx/release.S                     |  169 +++++++++++++++++
>  cpu/mpc86xx/start.S                       |  186 ++++++++-----------
>  doc/README.mpc8641hpcn                    |   64 +++++--
>  include/configs/MPC8610HPCD.h             |   40 +++-
>  include/configs/MPC8641HPCN.h             |  289 ++++++++++++++++++++--------
>  include/configs/sbc8641d.h                |   16 ++
>  lib_ppc/board.c                           |   10 +-
>  17 files changed, 721 insertions(+), 278 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A man is not complete until he is married -- then he is finished.