[U-Boot] [PATCH 06/10] AVR32: macb - Search for PHY id

[Olav Morken]

This patch adds support for searching through available PHY-addresses in
the macb-driver. This is needed for the ATEVK1100 evaluation board,
where the PHY-address will be initialized to either 1 or 7.

Signed-off-by: Gunnar Rangoy <gunnar at rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp at gmail.com>
Signed-off-by: Olav Morken <olavmrk at gmail.com>
---
 drivers/net/macb.c |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 4fef374..561669b 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -338,6 +338,27 @@ static void macb_phy_reset(struct macb_device *macb)
 		       netdev->name, status);
 }
 
+static int macb_phy_find(struct macb_device *macb)
+{
+	int i;
+	u16 phy_id;
+
+	/* Search for PHY... */
+	for (i = 0; i < 32; i++) {
+		macb->phy_addr=i;
+		phy_id = macb_mdio_read(macb, MII_PHYSID1);
+		if (phy_id != 0xffff) {
+			printf("%s: PHY present at %d\n", macb->netdev.name, i);
+			return 1;
+		}
+	}
+
+	/* PHY isn't up to snuff */
+	printf("%s: PHY not found", macb->netdev.name);
+
+	return 0;
+}
+
 static int macb_phy_init(struct macb_device *macb)
 {
 	struct eth_device *netdev = &macb->netdev;
@@ -346,6 +367,13 @@ static int macb_phy_init(struct macb_device *macb)
 	int media, speed, duplex;
 	int i;
 
+	if (macb->phy_addr == 0xff) {
+		/* Auto-detect phy_addr */
+		if (!macb_phy_find(macb)) {
+			return 0;
+		}
+	}
+
 	/* Check if the PHY is up to snuff... */
 	phy_id = macb_mdio_read(macb, MII_PHYSID1);
 	if (phy_id == 0xffff) {
-- 
1.6.0.2