[U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS.

[Wolfgang Denk]

Dear Kumar Gala,

In message <62E86B44-4E2A-4356-BD81-A0D014AB591E at kernel.crashing.org> you wrote:
> 
> On Oct 9, 2008, at 10:41 PM, Jason Jin wrote:
> 
> > SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled  
> > and the
> > driver still try to access the SATA registers, the cpu will hangup.
> > This patch try to fix this by reading the serdes status before the  
> > SATA
> > initialize.
> >
> > Signed-off-by: Jason Jin <Jason.jin at freescale.com>
> > ---
> > board/freescale/mpc8536ds/mpc8536ds.c |   12 ++++++++++++
> > lib_ppc/board.c                       |   16 ++++++++++++++--
> > 2 files changed, 26 insertions(+), 2 deletions(-)
> 
> Wolfgang, I think this was a patch for v2008.10.. Andy was looking for  
> you to ack or apply.

It was on my to-do list. Thanks for the reminder.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It is better to have tried and failed than to have  failed  to  try,
but the result's the same."                           - Mike Dennison