[U-Boot] [PATCH] 440spe MQ initialization

Stefan Roese sr at denx.de
Fri Oct 17 12:47:31 CEST 2008


Hi Wolfgang,

On Friday 17 October 2008, Wolfgang Denk wrote:
> > So it seems that the current code relies on some already preset (default)
> > values in those registers. I don't really like this. I'll try to provide
> > a patch that configures those registers completely in a short while.
>
> "In a short while" means very few hours?

Yes. I already tested with Yuri's patch and it doesn't change the resulting 
register values. So the current code already sets the correct values, it just 
doesn't set all bits explicitly. I'll provide another patch in a few minutes 
to set these bits explicitly, since this makes it clearer which bits are 
really configured.

> If Yuri is sopposed to  test 
> this,  we  have  little  time  left.  The  release  is  scheduled for
> tomorrow.

Understood. He can test with the current U-Boot version without setting the MQ 
registers in the DMA/RAID Linux driver.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list