[U-Boot] [U-boot] Export functions using Jumptable in Standalone application

[Nagesh.ML]

Hi,

Yes we require this initialization of the switch for network operation.

--Nagesh.


wd wrote:
> 
> Dear "Nagesh.ML",
> 
> In message <20144414.post at talk.nabble.com> you wrote:
>> 
>> In one of my standalone application used for initializing the
>> hardware(Ethernet Switch) registers, I have exported two functions
>> miiphy_read() and miiphy_write() of u-boot as per the procedure given in
>> README.standalone document. By doing so, will my standalone application
>> come
>> under GPL? If yes, is there any other way to implement this?
> 
> Is this initialization necessary for the network operation in U-Boot?
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> If you believe that feeling bad or worrying long enough will change a
> past or future event, then you are residing on another planet with  a
> different reality system.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/-U-boot--Export-functions-using-Jumptable-in-Standalone-application-tp20144414p20201180.html
Sent from the Uboot - Users mailing list archive at Nabble.com.