[U-Boot] [PATCH 1/5] 86xx: Move the clear_tlbs before MMU turn on

Dave Liu daveliu at freescale.com
Tue Oct 28 10:46:12 CET 2008


We must invalidate TLBs before MMU turn on, but
currently the code is not, if there are some stale
TLB entry valid in the TLBs, it will cause strange
issue.

Signed-off-by: Dave Liu <daveliu at freescale.com>
---
 cpu/mpc86xx/start.S |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 159f3e1..30e6047 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -202,8 +202,12 @@ boot_warm:
 	mtmsr	0
 #endif
 
+	/* Invalidate BATs */
 	bl	invalidate_bats
 	sync
+	/* Invalidate all of TLB before MMU turn on */
+	bl      clear_tlbs
+	sync
 
 #ifdef CONFIG_SYS_L2
 	/* init the L2 cache */
@@ -275,7 +279,6 @@ in_flash:
 
 	/* setup the rest of the bats */
 	bl      setup_bats
-	bl      clear_tlbs
 	sync
 
 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-- 
1.5.4



More information about the U-Boot mailing list