[U-Boot] [PATCH 02/10] Eliminate support for using MMC as memory

Andy Fleming afleming at freescale.com
Thu Oct 30 23:35:31 CET 2008


MMC cards are not memory, so we stop treating them that way.

Signed-off-by: Andy Fleming <afleming at freescale.com>
---
 common/cmd_mem.c          |   43 -------------------------------------------
 cpu/arm720t/lpc2292/mmc.c |   26 --------------------------
 cpu/pxa/mmc.c             |   14 --------------
 drivers/mmc/atmel_mci.c   |   15 ---------------
 include/mmc.h             |    1 -
 5 files changed, 0 insertions(+), 99 deletions(-)

diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index d7666c2..960f753 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -29,9 +29,6 @@
 
 #include <common.h>
 #include <command.h>
-#if defined(CONFIG_CMD_MMC)
-#include <mmc.h>
-#endif
 #ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>
 #endif
@@ -404,46 +401,6 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
-#if defined(CONFIG_CMD_MMC)
-	if (mmc2info(dest)) {
-		int rc;
-
-		puts ("Copy to MMC... ");
-		switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
-		case 0:
-			putc ('\n');
-			return 1;
-		case -1:
-			puts ("failed\n");
-			return 1;
-		default:
-			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
-			return 1;
-		}
-		puts ("done\n");
-		return 0;
-	}
-
-	if (mmc2info(addr)) {
-		int rc;
-
-		puts ("Copy from MMC... ");
-		switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
-		case 0:
-			putc ('\n');
-			return 1;
-		case -1:
-			puts ("failed\n");
-			return 1;
-		default:
-			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
-			return 1;
-		}
-		puts ("done\n");
-		return 0;
-	}
-#endif
-
 #ifdef CONFIG_HAS_DATAFLASH
 	/* Check if we are copying from RAM or Flash to DataFlash */
 	if (addr_dataflash(dest) && !addr_dataflash(addr)){
diff --git a/cpu/arm720t/lpc2292/mmc.c b/cpu/arm720t/lpc2292/mmc.c
index fd7f149..792a884 100644
--- a/cpu/arm720t/lpc2292/mmc.c
+++ b/cpu/arm720t/lpc2292/mmc.c
@@ -128,30 +128,4 @@ int mmc_init(int verbose)
 	return ret;
 }
 
-int mmc_write(uchar * src, ulong dst, int size)
-{
-#ifdef MMC_DEBUG
-	printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size);
-#endif
-	/* Since mmc2info always returns 0 this function will never be called */
-	return 0;
-}
-
-int mmc_read(ulong src, uchar * dst, int size)
-{
-#ifdef MMC_DEBUG
-	printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size);
-#endif
-	/* Since mmc2info always returns 0 this function will never be called */
-	return 0;
-}
-
-int mmc2info(ulong addr)
-{
-	/* This function is used by cmd_cp to determine if source or destination
-	 address resides on MMC-card or not. We do not support copy to and from
-	 MMC-card so we always return 0. */
-	return 0;
-}
-
 #endif /* CONFIG_MMC */
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index d735c8d..1f0d488 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -645,18 +645,4 @@ mmc_init(int verbose)
 	return rc;
 }
 
-int mmc_ident(block_dev_desc_t * dev)
-{
-	return 0;
-}
-
-int mmc2info(ulong addr)
-{
-	if (addr >= CONFIG_SYS_MMC_BASE
-	    && addr < CONFIG_SYS_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
-		return 1;
-	}
-	return 0;
-}
-
 #endif /* CONFIG_MMC */
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
index 3aa92f2..4028256 100644
--- a/drivers/mmc/atmel_mci.c
+++ b/drivers/mmc/atmel_mci.c
@@ -531,18 +531,3 @@ int mmc_init(int verbose)
 
 	return 0;
 }
-
-int mmc_read(ulong src, uchar *dst, int size)
-{
-	return -ENOSYS;
-}
-
-int mmc_write(uchar *src, ulong dst, int size)
-{
-	return -ENOSYS;
-}
-
-int mmc2info(ulong addr)
-{
-	return 0;
-}
diff --git a/include/mmc.h b/include/mmc.h
index 19c76fe..26b9553 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -52,6 +52,5 @@
 int mmc_init(int verbose);
 int mmc_read(ulong src, uchar *dst, int size);
 int mmc_write(uchar *src, ulong dst, int size);
-int mmc2info(ulong addr);
 
 #endif /* _MMC_H_ */
-- 
1.5.4.GIT



More information about the U-Boot mailing list