[U-Boot] U-Boot version for a new port

[Gururaja Hebbar K R]

Hi,

> From: "Roman Mashak" <romez777 at gmail.com>
> Subject: [U-Boot] U-Boot version for a new port
> I'm planning to make a port on a ARM926EJ-S based board. What is the
> recommended way: take release or GIT version as a base ?

Depends on what processor you are using, atmel at91sam9 series or omap
or ti davinci 

If s, then check if your board/processor configs match with any of
these. 

Try to port their configuration & files to your board.

Look at arm versatile board, ti davinci boards for reference.

Hope this helps

Regards
Gururaja