[U-Boot] [PATCH 05/29 V2] rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Wed Sep 10 21:28:45 CEST 2008


Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 README                                |    2 +-
 board/Marvell/common/bootseq.txt      |    2 +-
 board/evb64260/bootseq.txt            |    2 +-
 board/netstal/hcu5/README.txt         |    2 +-
 board/xilinx/ml300/ml300.c            |    2 +-
 board/xilinx/xilinx_iic/iic_adapter.c |    2 +-
 common/cmd_eeprom.c                   |    4 ++--
 common/cmd_nvedit.c                   |    6 +++---
 common/env_eeprom.c                   |    4 ++--
 include/configs/APC405.h              |    2 +-
 include/configs/ASH405.h              |    2 +-
 include/configs/Alaska8220.h          |    8 ++++----
 include/configs/B2.h                  |    2 +-
 include/configs/CANBT.h               |    2 +-
 include/configs/CCM.h                 |    2 +-
 include/configs/CMS700.h              |    2 +-
 include/configs/CPCI2DP.h             |    2 +-
 include/configs/CPCI405.h             |    2 +-
 include/configs/CPCI4052.h            |    2 +-
 include/configs/CPCI405AB.h           |    2 +-
 include/configs/CPCI405DT.h           |    2 +-
 include/configs/CPCI750.h             |    2 +-
 include/configs/CPCIISER4.h           |    2 +-
 include/configs/CPU86.h               |    2 +-
 include/configs/CPU87.h               |    2 +-
 include/configs/DP405.h               |    2 +-
 include/configs/DU405.h               |    2 +-
 include/configs/DU440.h               |    4 ++--
 include/configs/ELPT860.h             |    2 +-
 include/configs/ERIC.h                |    8 ++++----
 include/configs/EXBITGEN.h            |    4 ++--
 include/configs/G2000.h               |    2 +-
 include/configs/GEN860T.h             |    4 ++--
 include/configs/GTH.h                 |    2 +-
 include/configs/HH405.h               |    2 +-
 include/configs/HUB405.h              |    2 +-
 include/configs/IP860.h               |    6 +++---
 include/configs/JSE.h                 |    2 +-
 include/configs/KAREF.h               |    2 +-
 include/configs/METROBOX.h            |    2 +-
 include/configs/MIP405.h              |    2 +-
 include/configs/OCRTC.h               |    2 +-
 include/configs/ORSG.h                |    2 +-
 include/configs/PATI.h                |    4 ++--
 include/configs/PCI405.h              |    2 +-
 include/configs/PIP405.h              |    2 +-
 include/configs/PLU405.h              |    2 +-
 include/configs/PM826.h               |    2 +-
 include/configs/PM828.h               |    2 +-
 include/configs/PMC405.h              |    2 +-
 include/configs/PMC440.h              |    4 ++--
 include/configs/PPChameleonEVB.h      |    2 +-
 include/configs/SCM.h                 |    2 +-
 include/configs/SXNI855T.h            |    2 +-
 include/configs/TOP5200.h             |    2 +-
 include/configs/TOP860.h              |    2 +-
 include/configs/TQM8260.h             |    2 +-
 include/configs/VCMA9.h               |    2 +-
 include/configs/VOH405.h              |    2 +-
 include/configs/VOM405.h              |    2 +-
 include/configs/WUH405.h              |    2 +-
 include/configs/XPEDITE1K.h           |    2 +-
 include/configs/Yukon8220.h           |    8 ++++----
 include/configs/atc.h                 |    2 +-
 include/configs/bamboo.h              |    4 ++--
 include/configs/bf533-stamp.h         |    2 +-
 include/configs/bf537-stamp.h         |    2 +-
 include/configs/cpci5200.h            |    2 +-
 include/configs/csb272.h              |    2 +-
 include/configs/csb472.h              |    2 +-
 include/configs/ep82xxm.h             |    6 +++---
 include/configs/hcu4.h                |    2 +-
 include/configs/hcu5.h                |    4 ++--
 include/configs/imx31_phycore.h       |    2 +-
 include/configs/innokom.h             |    2 +-
 include/configs/kb9202.h              |    2 +-
 include/configs/m501sk.h              |    4 ++--
 include/configs/mcu25.h               |    2 +-
 include/configs/mecp5200.h            |    2 +-
 include/configs/ml300.h               |    4 ++--
 include/configs/pcu_e.h               |    2 +-
 include/configs/pf5200.h              |    2 +-
 include/configs/quad100hd.h           |    4 ++--
 include/configs/redwood.h             |    2 +-
 include/configs/sc520_cdp.h           |    2 +-
 include/configs/sc520_spunk.h         |    2 +-
 include/configs/sorcery.h             |    6 +++---
 include/configs/stxssa.h              |    6 +++---
 include/configs/yosemite.h            |    6 +++---
 include/configs/yucca.h               |    2 +-
 lib_blackfin/board.c                  |    2 +-
 lib_m68k/board.c                      |    2 +-
 lib_ppc/board.c                       |    2 +-
 lib_sparc/board.c                     |    2 +-
 94 files changed, 127 insertions(+), 127 deletions(-)

diff --git a/README b/README
index 44b450c..4823255 100644
--- a/README
+++ b/README
@@ -2199,7 +2199,7 @@ keep settings there always unmodified except somebody uses "saveenv"
 to save the current settings.
 
 
-- CFG_ENV_IS_IN_EEPROM:
+- CONFIG_ENV_IS_IN_EEPROM:
 
 	Use this if you have an EEPROM or similar serial access
 	device and a driver for it.
diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
index 290aed9..e4fefb3 100644
--- a/board/Marvell/common/bootseq.txt
+++ b/board/Marvell/common/bootseq.txt
@@ -88,7 +88,7 @@ in_flash:
 		    nothing
 		mem_malloc_init
 		malloc_bin_reloc
-		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 		env_relocated
 		misc_init_r(bd): (board/evb64260/evb64260.c)
 		    mpsc_init2
diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt
index 290aed9..e4fefb3 100644
--- a/board/evb64260/bootseq.txt
+++ b/board/evb64260/bootseq.txt
@@ -88,7 +88,7 @@ in_flash:
 		    nothing
 		mem_malloc_init
 		malloc_bin_reloc
-		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 		env_relocated
 		misc_init_r(bd): (board/evb64260/evb64260.c)
 		    mpsc_init2
diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index c205108..75c0dd7 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -152,7 +152,7 @@ From now on our copy is in RAM and we will run from there,
 	    CFG_EBC_PB0A, CFG_EBC_PB0C from hcu5.h
 	mem_malloc_init
 	malloc_bin_reloc
-	spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+	spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 	env_relocated
 	misc_init_r(bd): (board/netstal/hcu5.c)
 	    ethaddr mit serial number ergänzen
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index 5d493ee..e64becc 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -42,7 +42,7 @@
 #include <common.h>
 #include <asm/processor.h>
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 extern void convert_env(void);
 #endif
 
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 37dce03..5d84ca7 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -42,7 +42,7 @@
 #include <environment.h>
 #include <net.h>
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #include <i2c.h>
 #include "xiic_l.h"
 
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index e5000e9..5034b5e 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -42,7 +42,7 @@
 #include <command.h>
 #include <i2c.h>
 
-#if defined(CFG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
+#if defined(CONFIG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
 
 extern void eeprom_init  (void);
 extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
@@ -121,7 +121,7 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 
-#if defined(CFG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
+#if defined(CONFIG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
 
 #ifndef CONFIG_SPI
 #if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 7089706..8b6b46b 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -53,7 +53,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if !defined(CFG_ENV_IS_IN_NVRAM)	&& \
-    !defined(CFG_ENV_IS_IN_EEPROM)	&& \
+    !defined(CONFIG_ENV_IS_IN_EEPROM)	&& \
     !defined(CFG_ENV_IS_IN_FLASH)	&& \
     !defined(CFG_ENV_IS_IN_DATAFLASH)	&& \
     !defined(CFG_ENV_IS_IN_NAND)	&& \
@@ -540,7 +540,7 @@ int getenv_r (char *name, char *buf, unsigned len)
 	return (-1);
 }
 
-#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
+#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CONFIG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
@@ -596,7 +596,7 @@ U_BOOT_CMD(
 	"    - delete environment variable 'name'\n"
 );
 
-#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
+#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CONFIG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 9e1a201..1a03f43 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -26,7 +26,7 @@
 
 #include <common.h>
 
-#if defined(CFG_ENV_IS_IN_EEPROM) /* Environment is in EEPROM */
+#if defined(CONFIG_ENV_IS_IN_EEPROM) /* Environment is in EEPROM */
 
 #include <command.h>
 #include <environment.h>
@@ -107,4 +107,4 @@ int env_init(void)
 	return (0);
 }
 
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 6ee0a36..882d188 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -291,7 +291,7 @@ extern int flash_banks;
 /*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the */
 					/* beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 85c6a99..56ae708 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -233,7 +233,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 38b962f..0c2e6ae 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -133,7 +133,7 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS	3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
 /*
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		256
 */
@@ -226,11 +226,11 @@
 
 #if defined CFG_ENV_IS_IN_FLASH
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #elif defined CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
 #undef CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
 #endif
diff --git a/include/configs/B2.h b/include/configs/B2.h
index d6ab1ad..1c4b6fe 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -176,7 +176,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x0	/* environment starts at the beginning of the EEPROM */
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 7029dbd..a4afcca 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -163,7 +163,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index 6194c5c..57c1223 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -227,7 +227,7 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		2048
 #define CFG_ENV_SIZE		2048
 #endif
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 285cd5c..f157b5f 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -248,7 +248,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 58900c3..8b205c7 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -200,7 +200,7 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index bd43e1d..bc514b0 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -243,7 +243,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 9ec1721..ef8abf6 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -258,7 +258,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 7899598..431054d 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -263,7 +263,7 @@
 
 /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC32 is 4096 bytes */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index c173539..6c5a3fe 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -261,7 +261,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 03756c3..4818aed 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -579,7 +579,7 @@
 /* #define CFG_ENV_ADDR	   (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
 #endif
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_EEPROM_PAGE_WRITE_BITS 5
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
 #define CFG_I2C_EEPROM_ADDR	0x050
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 78b754c..958b111 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -200,7 +200,7 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 10cebc9..742ea46 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -332,7 +332,7 @@
 #endif
 #else
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 /* mask of address bits that overflow into the "EEPROM chip address"    */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index d325c4d..db423a0 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -347,7 +347,7 @@
 #endif
 #else
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 912fb2a..50d44a0 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -216,7 +216,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index c8bf67f..811b9c3 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -227,7 +227,7 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index c757523..b1d4ff3 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -113,7 +113,7 @@
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_EEPROM    1	/* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1	/* use FLASH for environment vars */
 
 /*
  * FLASH related
@@ -146,7 +146,7 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		0	/* environment starts at */
 					/* the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x1000 /* 4096 bytes may be used for env vars */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index f927a2c..828dd9f 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -138,7 +138,7 @@
 #define CONFIG_ENV_OVERWRITE	1  /* Allow Overwrite of serial# & ethaddr */
 
 #undef	  CFG_ENV_IS_IN_NVRAM	       /* Environment is in NVRAM	*/
-#undef	  CFG_ENV_IS_IN_EEPROM	       /* Environment is in I2C EEPROM	*/
+#undef	  CONFIG_ENV_IS_IN_EEPROM	       /* Environment is in I2C EEPROM	*/
 #define CFG_ENV_IS_IN_FLASH	1      /* Environment is in FLASH	*/
 
 #define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps	*/
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index bfdcf6a..dfbbc95 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -48,7 +48,7 @@
 #define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 #if 0
-#define CFG_ENV_IS_IN_EEPROM	1	/* use I2C RTC X1240 for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use I2C RTC X1240 for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars */
 #endif					/* total size of a X1240 is 2048 bytes */
@@ -64,13 +64,13 @@
 
 #ifdef CFG_ENV_IS_IN_FLASH
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #else
 #ifdef CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #else
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #undef CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
 #endif
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 99d1cf2..cee0be4 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -47,11 +47,11 @@
 #define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
 
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM    1
+#define CONFIG_ENV_IS_IN_EEPROM    1
 #undef CFG_ENV_IS_IN_FLASH
 #undef CFG_ENV_IS_IN_NVRAM
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_I2C_EEPROM_ADDR		0x56    /* 1010110 */
 #define CFG_I2C_EEPROM_ADDR_LEN		1	/* 8-bit internal addressing */
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	1	/* ... and 1 bit in I2C address */
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index c12ce48..74e6ef7 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -299,7 +299,7 @@
  * Environment Variable setup
  */
 #if 1 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 422ed32..51cf579 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -435,9 +435,9 @@
  * be edited if this is changed!
  */
 #undef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_IS_IN_EEPROM
 
-#if defined(CFG_ENV_IS_IN_EEPROM)
+#if defined(CONFIG_ENV_IS_IN_EEPROM)
 #define CFG_ENV_SIZE			(2 * 1024)
 #define CFG_ENV_OFFSET			(CFG_ENV_EEPROM_SIZE - (8 * 1024))
 #else
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 461670a..4a98c40 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -195,7 +195,7 @@
 #define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
 #define	CFG_ENV_IS_IN_FLASH 1
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		0x000E0000
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 9bcbfe3..cf5fcf1 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -320,7 +320,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x100   /* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE            0x700   /* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index a389d58..8992706 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -232,7 +232,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index e6c7fe6..67f8833 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -190,17 +190,17 @@
 #undef	CFG_ENV_IS_IN_NVRAM
 #undef  CFG_ENV_IS_IN_NVRAM
 #undef	DEBUG_I2C
-#define	CFG_ENV_IS_IN_EEPROM
+#define	CONFIG_ENV_IS_IN_EEPROM
 
 #ifdef	CFG_ENV_IS_IN_NVRAM
 #define CFG_ENV_ADDR		0x20000000	/* use SRAM	*/
 #define CFG_ENV_SIZE		(16<<10)	/* use 16 kB	*/
 #endif	/* CFG_ENV_IS_IN_NVRAM */
 
-#ifdef	CFG_ENV_IS_IN_EEPROM
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		 512	/* Leave 512 bytes free for other data	*/
 #define CFG_ENV_SIZE		1536	/* Use remaining space			*/
-#endif	/* CFG_ENV_IS_IN_EEPROM */
+#endif	/* CONFIG_ENV_IS_IN_EEPROM */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 5b40ef6..b08301e 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -79,7 +79,7 @@
   /* JSE has EEPROM chips that are good for environment. */
 #undef	CFG_ENV_IS_IN_NVRAM
 #undef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM 1
+#define CONFIG_ENV_IS_IN_EEPROM 1
 #undef	CFG_ENV_IS_NOWHERE
 
   /* This is the 7bit address of the device, not including P. */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 816e63b..5b21b90 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -143,7 +143,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
 #undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
 #define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
 
 #define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index d61b49e..2afb3ff 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -205,7 +205,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
 #undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
 #define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
 
 #define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 66235e3..e0f9386 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -114,7 +114,7 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x00000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x00800	/* 2k bytes may be used for env vars */
 
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 94b5bc9..c561e15 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -199,7 +199,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 4e03088..fd14088 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -197,7 +197,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 4b37eca..2676c78 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -172,8 +172,8 @@
 #define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
 
 
-#define	CFG_ENV_IS_IN_EEPROM
-#ifdef	CFG_ENV_IS_IN_EEPROM
+#define	CONFIG_ENV_IS_IN_EEPROM
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		2048
 #endif
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index e70c0d3..dea59b6 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -225,7 +225,7 @@
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars*/
 				   /* total size of a CAT24WC08 is 1024 bytes */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 86ea6c6..7876177 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -95,7 +95,7 @@
 
 #define CFG_I2C_EEPROM_ADDR	0x53
 #define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */
 
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 38c495e..75cdc2f 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -273,7 +273,7 @@
 /*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* reseve 0x100 bytes for strapping */
 #define CFG_ENV_SIZE		0x700
 
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 190e2a4..de1ecde 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -263,7 +263,7 @@
 #define CFG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0x58
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 96c0edf..cac8f27 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -256,7 +256,7 @@
 #define CFG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0x58
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 966bbf9..f627422 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -244,7 +244,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 9140287..071ba10 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -105,7 +105,7 @@
  * Environment
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
 #else
 #define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars */
 #define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
@@ -146,7 +146,7 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		0	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x1000	/* 4096 bytes may be used for env vars */
 #endif
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index cf98324..a33bc3b 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -417,7 +417,7 @@
  */
 #ifdef ENVIRONMENT_IN_EEPROM
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/
 
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index febfc39..2c7e55f 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -276,7 +276,7 @@
 #define CFG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		2048
 #endif
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index c5d5386..85b3a9f 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -458,7 +458,7 @@
   #define CFG_ENV_SIZE		0x00002000
 #else
   /* environment is in EEPROM */
-  #define CFG_ENV_IS_IN_EEPROM		1
+  #define CONFIG_ENV_IS_IN_EEPROM		1
   #define CFG_ENV_OFFSET		0	/* at beginning of EEPROM */
   #define CFG_ENV_SIZE		     1024	/* Use only a part of it*/
 #endif
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 4c44735..083686c 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -271,7 +271,7 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
 #define CFG_ENV_OFFSET		0x1000
 #define CFG_ENV_SIZE		0x0700
 
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 151c407..288019f 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -160,7 +160,7 @@
  * only the first 6k in EEPROM are available for user. Of that we use 256b
  */
 #define	CONFIG_SOFT_I2C
-#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
 #define CFG_ENV_OFFSET		0x1000
 #define CFG_ENV_SIZE		0x0700
 #define CFG_I2C_EEPROM_ADDR 0x57
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index ced87b5..a77b119 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -312,7 +312,7 @@
 #define CFG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		2048
 #endif
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 02cabb2..50dd7aa 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -89,7 +89,7 @@
 
 #define CFG_I2C_EEPROM_ADDR	0x50
 #define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x000	/* environment starts at offset 0 */
 #define CFG_ENV_SIZE		0x800	/* 2KB should be more than enough */
 
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 3ca928e..5d36f24 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -266,7 +266,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index f235890..eb8cbc8 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -191,7 +191,7 @@
 /*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 582d8cf..9c0bd43 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -229,7 +229,7 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 38ea576..c3b0e08 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -151,7 +151,7 @@ extern void out32(unsigned int, unsigned long);
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_EEPROM 1
+#define CONFIG_ENV_IS_IN_EEPROM 1
 #define CFG_ENV_SIZE		0x100	    /* Size of Environment vars */
 #define CFG_ENV_OFFSET		0x100
 #define CFG_I2C_EEPROM_ADDR	0x50		/* this is actually the second page of the eeprom */
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 1b4195a..60f2343 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -133,7 +133,7 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS	3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
 /*
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		256
 */
@@ -226,11 +226,11 @@
 
 #if defined CFG_ENV_IS_IN_FLASH
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #elif defined CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
 #undef CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
 #endif
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 285b4e4..1e393a2 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -275,7 +275,7 @@
 # define CFG_ENV_SIZE		0x10000
 # define CFG_ENV_SECT_SIZE	0x10000
 #else
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		2048
 #define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 16-byte page size	*/
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 41058f8..7caa403 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -233,10 +233,10 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
 #define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /*
  * Default environment variables
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 9f5667b..842207f 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -102,7 +102,7 @@
 #define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0x4000
 #define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
 #else
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index a06c1dc..6d43839 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -235,7 +235,7 @@
 #define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
 
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0x4000
 #define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */
 #else
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index fffd1fe..7974491 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -224,7 +224,7 @@
 #define CFG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
 				   /* total size of a CAT24WC32 is 8192 bytes */
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 5145c00..701d3c8 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -232,7 +232,7 @@
  */
 #define CFG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 
 /*
  * General Memory organization
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index d3e5ea8..4fef2f6 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -231,7 +231,7 @@
  */
 #define CFG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 
 /*
  * General Memory organization
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index ac68c86..4de879a 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -194,7 +194,7 @@
 #if 1
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -223,10 +223,10 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
 #define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /* RTC Configuration */
 #define CONFIG_RTC_M41T11	1	/* uses a M41T81 */
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index d99ac53..f03f9b9 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -125,7 +125,7 @@
 #define CFG_ENV_IS_IN_FLASH
 #undef  CFG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM configuration */
 #define PROM_SIZE	2048
 #define CFG_ENV_OFFSET	 512
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 54d6721..d274223 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -108,10 +108,10 @@
 
 #undef	CFG_ENV_IS_IN_NVRAM
 #define  CFG_ENV_IS_IN_FLASH
-#undef	CFG_ENV_IS_IN_EEPROM
+#undef	CONFIG_ENV_IS_IN_EEPROM
 #undef  CFG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM and bootstrap configuration */
 #define PROM_SIZE	2048
 #define CFG_BOOSTRAP_OPTION_OFFSET	 512
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 237f361..18ff450 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -152,7 +152,7 @@
 #define CFG_MAX_FLASH_SECT	259	     /* max number of sectors on one chip */
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE /* Monitor at beginning of flash */
 
-#define	CFG_ENV_IS_IN_EEPROM		1
+#define	CONFIG_ENV_IS_IN_EEPROM		1
 #define CFG_ENV_OFFSET			0x00	/* environment starts here     */
 #define CFG_ENV_SIZE			4096
 #define CFG_I2C_EEPROM_ADDR		0x52
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 2b65052..1435d04 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -140,7 +140,7 @@
 #define CFG_I2C_SPEED			50000
 #define CFG_I2C_SLAVE			0xfe
 
-#define CFG_ENV_IS_IN_EEPROM		1
+#define CONFIG_ENV_IS_IN_EEPROM		1
 
 #define CFG_ENV_OFFSET			0x00	/* environment starts here  */
 #define CFG_ENV_SIZE			1024	/* 1 KiB                    */
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index e775e60..8df222b 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -128,7 +128,7 @@
 
 #define	CONFIG_HARD_I2C
 
-#define	CFG_ENV_IS_IN_EEPROM
+#define	CONFIG_ENV_IS_IN_EEPROM
 
 #ifdef CONFIG_KB9202
 #define CFG_ENV_OFFSET			0x3E00
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index bc94cf4..7fc460a 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -65,7 +65,7 @@
 #define CFG_I2C_SPEED		100
 #define CFG_I2C_SLAVE		0
 #define CFG_CONSOLE_INFO_QUIET
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_I2C_EEPROM_ADDR	0x50
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 #define CFG_EEPROM_AT24C16
@@ -164,7 +164,7 @@
 #define CFG_ENV_SIZE		2048
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_OFFSET		1024
 #define CFG_ENV_SIZE		1024
 #endif
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index 6adba96..d146537 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -125,7 +125,7 @@
 #define CFG_ENV_IS_IN_FLASH
 #undef  CFG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM configuration */
 #define PROM_SIZE	2048
 #define CFG_ENV_OFFSET	 512
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 75040fe..1c2f1a2 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -196,7 +196,7 @@
 #define CFG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars*/
 				   /* total size of a CAT24WC32 is 8192 bytes */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 319923a..67129a5 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -62,10 +62,10 @@
 #define CFG_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
 #define CFG_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
 
 /* following are used only if env is in EEPROM */
-#ifdef	CFG_ENV_IS_IN_EEPROM
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
 #define CFG_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 7e393f7..f15ce99 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -234,7 +234,7 @@
 #define	CFG_ENV_IS_EMBEDDED	1	/* short-cut compile-time test		*/
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0
 #define CFG_I2C_EEPROM_ADDR_LEN	2
 #define CFG_ENV_OFFSET		1024
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index c065d33..4ed8a21 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -210,7 +210,7 @@
 #define CFG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
 				   /* total size of a CAT24WC32 is 8192 bytes */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index d464734..94bdd8c 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -42,7 +42,7 @@
 #define PLLMR1_DEFAULT		PLLMR1_266_133_66 /* no PCI */
 
 /* the environment is in the EEPROM by default */
-#define CFG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_IS_IN_EEPROM
 #undef CFG_ENV_IS_IN_FLASH
 
 #define CONFIG_NET_MULTI	1
@@ -208,7 +208,7 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_SIZE		0x400		/* Size of Environment vars */
 #define CFG_ENV_OFFSET		0x00000000
 #define CFG_ENABLE_CRC_16	1       /* Intrinsyc formatting used crc16 */
diff --git a/include/configs/redwood.h b/include/configs/redwood.h
index 35e9f8b..ebb2921 100644
--- a/include/configs/redwood.h
+++ b/include/configs/redwood.h
@@ -121,7 +121,7 @@
  *----------------------------------------------------------------------*/
 #undef	CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
 #define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index dfe7b7d..ecfd749 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -144,7 +144,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM   1
+#define CONFIG_ENV_IS_IN_EEPROM   1
 #define CONFIG_SPI
 #define CFG_ENV_SIZE	       0x4000	/* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
 #define CFG_ENV_OFFSET         0
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 072675b..aa9dc97 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -161,7 +161,7 @@
 #else
 /* Environment in EEPROM */
 
-# define CFG_ENV_IS_IN_EEPROM   1
+# define CONFIG_ENV_IS_IN_EEPROM   1
 # define CONFIG_SPI
 # define CONFIG_SPI_X 1
 # define CFG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index f4e4608..0d07560 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -208,11 +208,11 @@
 
 #if defined CFG_ENV_IS_IN_FLASH
 #undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #elif defined CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
 #undef CFG_ENV_IS_IN_NVRAM
 #undef CFG_ENV_IS_IN_FLASH
 #endif
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index ac349df..4f1d70c 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -313,7 +313,7 @@
 
 /* Environment - default config is in flash, see below */
 #if 0	/* in EEPROM */
-# define CFG_ENV_IS_IN_EEPROM	1
+# define CONFIG_ENV_IS_IN_EEPROM	1
 # define CFG_ENV_OFFSET		0
 # define CFG_ENV_SIZE		2048
 #else	/* in flash */
@@ -426,7 +426,7 @@
  * but only little space is available, so we use a very simple setup.
  * With environment in flash, we use a more powerful default configuration.
  */
-#ifdef CFG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
+#ifdef CONFIG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
 
 #define CONFIG_BAUDRATE		38400
 
@@ -480,6 +480,6 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#endif	/* CFG_ENV_IS_IN_EEPROM */
+#endif	/* CONFIG_ENV_IS_IN_EEPROM */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index cb2042c..f90e9ec 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -98,7 +98,7 @@
 #if 1
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -147,10 +147,10 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
 #define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 026fef6..0c09a1d 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -141,7 +141,7 @@
 
 #undef  CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
 #define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 43d8be8..0b8e664 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -378,7 +378,7 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	malloc_bin_reloc();
 
 #ifdef CONFIG_SPI
-# if ! defined(CFG_ENV_IS_IN_EEPROM)
+# if ! defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f();
 # endif
 	spi_init_r();
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 4fee35a..a80ec2d 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -568,7 +568,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	malloc_bin_reloc ();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f ();
 # endif
 	spi_init_r ();
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 4d02eb2..1e00404 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -822,7 +822,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	malloc_bin_reloc ();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f ();
 # endif
 	spi_init_r ();
diff --git a/lib_sparc/board.c b/lib_sparc/board.c
index 15d6935..3c57fcb 100644
--- a/lib_sparc/board.c
+++ b/lib_sparc/board.c
@@ -377,7 +377,7 @@ void board_init_f(ulong bootflag)
 	malloc_bin_reloc();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f();
 # endif
 	spi_init_r();
-- 
1.5.6.5



More information about the U-Boot mailing list