[U-Boot] mpc83xx: USB: "Machine check in kernel mode" with usb start on mpc8315erdb

[Remy Bohmer]

Hello Michael,

Have you any idea about this issue?

Kind Regards,

Remy

2009/4/17 Mahajan Vivek-B08308 <Vivek.Mahajan at freescale.com>:
> Hello there,
>
> I built u-boot for mpc8315erdb from the current master @ http://git.denx.de/u-boot.git/ after enabling USB via adding the following #defines in include/configs/MPC8315ERDB.h:-
>
> #define CONFIG_CMD_USB
> #define CONFIG_USB_EHCI
> #define CONFIG_USB_EHCI_FSL
>
> But I ran into the following "machine check" after running usb start from the u-boot prompt. No USB device is plugged in. Please let me know if the above mentioned USB config options are sufficient to get the basic USB up and running.
>
> Any help in this matter is highly appreciated.
>
> Thanks,
> Vivek
>
> /**************************************************************************************************************************
> U-Boot 2009.03-00333-g7ee38c0-dirty (Apr 17 2009 - 10:33:36) MPC83XX
>
> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
>
> CPU:   e300c3, MPC8315E, Rev: 1.1 at 400 MHz, CSB: 133.333 MHz
> Board: Freescale MPC8315ERDB Rev 0.0
> I2C:   ready
> DRAM:  128 MB
> FLASH:  8 MB
> NAND:  32 MiB
> *** Warning - bad CRC, using default environment
>
> PCIE0: No link
> PCIE1: No link
> In:    serial
> Out:   serial
> Err:   serial
> Net:   eTSEC0, eTSEC1
> Hit any key to stop autoboot:  0
> => version
>
> U-Boot 2009.03-00333-g7ee38c0-dirty (Apr 17 2009 - 10:33:36) MPC83XX
> => he usb
> usb reset - reset (rescan) USB controller
> usb  tree  - show USB device tree
> usb  info [dev] - show available USB devices
>
> => usb start
> (Re)start USB...
> USB:   Machine check in kernel mode.
> Caused by (from msr): regs 07f1bc80 Unknown values in msr
> NIP: 07FD7CC0 XER: 00000000 LR: 07FD7CA0 REGS: 07f1bc80 TRAP: 0200 DAR: 00000000
> MSR: 0000b030 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 11
>
> GPR00: 07FD7328 07F1BD70 07F1BF44 00000000 00000001 07F1BC50 07F1F638 00000000
> GPR08: FFFFFFFF 00000000 E0000000 E0023100 42000084 00000000 07FEC000 00000000
> GPR16: 00000000 07FE072C 07FEB264 07FE6B1C 00000000 00000000 00000000 07F1F588
> GPR24: 00000000 00000000 00000000 00000000 00000001 00000000 07FE7CA0 07FFB4CC
> Call backtrace:
> 00000001 07FD7328 07FC6D80 07FBBC2C 07FC2234 07FC183C 07FC1A08
> 07FC46A4 07FA29B8 07FA15E8
> machine check
> Âesetting the board.
>
> **********************************************************************************************************************/
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>