[U-Boot] OMAP3: Pending patches

[Dirk Behme]

To avoid loosing the overview, here my list of pending OMAP3 patches 
ready to be applied. From my point of view there are no open comments 
on these which will prevent to apply them. But please correct if I 
overlooked anything or add what (patches? comments?) I missed.

1. OMAP3: Beagle: Set pinmux conditionally for Rev C boards
http://lists.denx.de/pipermail/u-boot/2009-April/051013.html

2. OMAP3: Remove legacy NAND defines
http://lists.denx.de/pipermail/u-boot/2009-April/050882.html

3. OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
http://lists.denx.de/pipermail/u-boot/2009-April/051178.html

4. OMAP3: Fix changed mmc init command
http://lists.denx.de/pipermail/u-boot/2009-April/051179.html

5. OMAP3: Remove unused board-types
http://lists.denx.de/pipermail/u-boot/2009-April/051338.html

6. OMAP3: Print correct silicon revision
http://lists.denx.de/pipermail/u-boot/2009-April/051339.html

7. Zoom2 respin II (10 patches)
http://lists.denx.de/pipermail/u-boot/2009-April/050863.html
http://lists.denx.de/pipermail/u-boot/2009-April/050864.html
http://lists.denx.de/pipermail/u-boot/2009-April/050865.html
http://lists.denx.de/pipermail/u-boot/2009-April/050866.html
http://lists.denx.de/pipermail/u-boot/2009-April/050868.html
http://lists.denx.de/pipermail/u-boot/2009-April/050867.html
http://lists.denx.de/pipermail/u-boot/2009-April/050869.html
http://lists.denx.de/pipermail/u-boot/2009-April/050870.html
http://lists.denx.de/pipermail/u-boot/2009-April/050871.html
http://lists.denx.de/pipermail/u-boot/2009-April/050872.html

Note: There might be some dependencies between some of these patches. 
Different authors, sent at different time, unfortunately this can't be 
avoided. So dependent on the order the patches will be applied, there 
might be some conflicts. Let us know them, we will try to update/fix 
then as soon as possible! Most probably 5. and 7. will have some 
conflicts, as 5. removes some code 7. assumes it is still there. If 
this results in a conflict, let us apply the 10 patches from 7. first 
and then update 5.

Many thanks and best regards

Dirk