[U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant

[Guennadi Liakhovetski]

Hi,

this series of patches adds support for the graphics engine on i.MX31 SoC. 
Specifically it allows to display 8-bit BMPs on an OLED display, 
controlled by an SPI s6e63d6 controller from Samsung. A (fixed formatting) 
version of the

From: Mark Jackson <mpfj at mimc.co.uk>
Subject: [PATCH] Add 16bpp BMP support

patch is included for completeness. The cumulative diffstat is

 Makefile                              |    6
 board/imx31_phycore/imx31_phycore.c   |   51 ++
 common/lcd.c                          |  106 ++--
 drivers/gpio/Makefile                 |    3
 drivers/gpio/mx31_gpio.c              |   71 ++
 drivers/spi/mxc_spi.c                 |   99 +++
 drivers/video/Makefile                |    2
 drivers/video/mx3fb.c                 |  866 +++++++++++++++++++++++++++++++++-
 drivers/video/s6e63d6.c               |   68 ++
 include/asm-arm/arch-mx31/mx31-regs.h |   16
 include/asm-arm/arch-mx31/mx31.h      |   10
 include/configs/imx31_phycore.h       |   24
 include/lcd.h                         |   22
 include/s6e63d6.h                     |   37 +
 lib_arm/board.c                       |    7
 15 files changed, 1314 insertions(+), 74 deletions(-)

i.e., most changes go under drivers/video and to common/lcd.c, so, I would 
suggest to collect respective Acks and pull it through the video tree. 
Hence Anatolij is cc'ed on all patches:-) Also many need an Ack from the 
ARM maintainer, so, he is on cc on respective patches and on this one.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de