[U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit

Anatolij Gustschin agust at denx.de
Sat Feb 7 00:09:12 CET 2009


From: Guennadi Liakhovetski <lg at denx.de>

Fix setting the SPI Control register, 8 and 16-bit transfers
and a wrong pointer in the free routine in the mxc_spi driver.

Signed-off-by: Guennadi Liakhovetski <lg at denx.de>
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---

Changes since v1: chose a simpler fix
Changes since v2: fix the simpler fix: v2 worked as long as I just 
resetted the board, powering the board down showed, that v2 wasn't 
sufficient, it has lost the SPI Control register fix from v1.
Changes since v3: add empty line in spi_free_slave()

I'm going to push it via video tree as Jean-Christophe
mean it is more video related patch and have no objection.

Anatolij

 drivers/spi/mxc_spi.c |   31 ++++++++++++++++++++-----------
 1 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 5957ada..0ac4e90 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -90,17 +90,15 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen)
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
 	unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
 
-	if (MXC_CSPICTRL_BITCOUNT(bitlen - 1) != (cfg_reg & MXC_CSPICTRL_BITCOUNT(31))) {
-		cfg_reg = (cfg_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
-			MXC_CSPICTRL_BITCOUNT(bitlen - 1);
-		reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
-	}
+	mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
+		MXC_CSPICTRL_BITCOUNT(bitlen - 1);
 
-	reg_write(mxcs->base + MXC_CSPITXDATA, data);
+	if (cfg_reg != mxcs->ctrl_reg)
+		reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
 
-	cfg_reg |= MXC_CSPICTRL_XCH;
+	reg_write(mxcs->base + MXC_CSPITXDATA, data);
 
-	reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
+	reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_XCH);
 
 	while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
 		;
@@ -122,8 +120,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 
 	for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
 	     i < n_blks;
-	     i++, in_l++, out_l++, bitlen -= 32)
-		*in_l = spi_xchg_single(slave, *out_l, bitlen);
+	     i++, in_l++, out_l++, bitlen -= 32) {
+		u32 data = spi_xchg_single(slave, *out_l, bitlen);
+
+		/* Check if we're only transfering 8 or 16 bits */
+		if (!i) {
+			if (bitlen < 9)
+				*(u8 *)din = data;
+			else if (bitlen < 17)
+				*(u16 *)din = data;
+		}
+	}
 
 	return 0;
 }
@@ -169,7 +176,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 void spi_free_slave(struct spi_slave *slave)
 {
-	free(slave);
+	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+
+	free(mxcs);
 }
 
 int spi_claim_bus(struct spi_slave *slave)
-- 
1.5.3.3



More information about the U-Boot mailing list