[U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.

[Wolfgang Denk]

Dear Magnus Lilja,

In message <1219998982-21289-4-git-send-email-lilja.magnus at gmail.com> you wrote:
> Add support for the Freescale i.MX31 PDK (a.k.a 3DS) board. Ethernet and
> MC13873 RTC support is enabled by this patch.
> 
> Booting from NAND is not supported yet so U-boot relies on some other
> initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM.
> 
> Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
> ---
>  MAKEALL                                 |    1 +
>  Makefile                                |    3 +
>  board/freescale/mx31pdk/Makefile        |   53 ++++++++++
>  board/freescale/mx31pdk/config.mk       |    1 +
>  board/freescale/mx31pdk/lowlevel_init.S |   30 ++++++
>  board/freescale/mx31pdk/mx31pdk.c       |   76 +++++++++++++++
>  board/freescale/mx31pdk/u-boot.lds      |   59 ++++++++++++
>  include/configs/mx31pdk.h               |  159 +++++++++++++++++++++++++++++++
>  8 files changed, 382 insertions(+), 0 deletions(-)

I still have these patches marked as open in my list, but they
probably need rebasing now anyway.

Is it OK that I mark these patches as done?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Vor allem kein Gedanke! Nichts ist kompromittierender als ein  Gedan-
ke!            - Friedrich Wilhelm Nietzsche _Der Fall Wagner_ (1888)