[U-Boot] tftp not working

Afzal Nadirshah Afzal_Nadirshah at mindtree.com
Mon Feb 16 09:32:19 CET 2009


Hi,
         I tried the same. But it still gives the same error.
________________________________________
From: Wolfgang Denk [wd at denx.de]
Sent: Monday, February 16, 2009 12:12 PM
To: Afzal Nadirshah
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] tftp not working

Dear Afzal Nadirshah,

In message <174230991E95D743B0C91DF471EF44E8434329C609 at MTW02MSG02.mindtree.com> you wrote:
>
>           I have compiled u-boot-nand.bin for the canyonlands board.I flashed this image onto the nand flash and
> did a boot from NAND.I interrupted the u-boot and tried to do a tftp. But i get this error : No ethernet found.
>           Could someone tell me where to enable ethernet in the u-boot source code?

You probably forgot to set a MAC address (ethaddr environment
variable). Set one, then "saveenv", then "reset", then try again.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Data is a lot like humans: It is  born.  Matures.  Gets  married  to
other  data, divorced. Gets old. One thing that it doesn't do is die.
It has to be killed."                                 - Arthur Miller

http://www.mindtree.com/email/disclaimer.html


More information about the U-Boot mailing list