[U-Boot] ARM Pull Request

Wolfgang Denk wd at denx.de
Thu Feb 19 00:49:44 CET 2009


Dear Jean-Christophe PLAGNIOL-VILLARD,

In message <20090218032638.GE7712 at game.jcrosoft.org> you wrote:
> Hi Wolfgang,
> 
> 	Please pull The following changes since commit 9d8811c5bd2b7dd6307742cf22fbdb7953b6f816:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git://git.denx.de/u-boot-usb
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-arm.git master
> 
> Guennadi Liakhovetski (1):
>       ARM: remove unused variable
> 
> Ilya Yanok (4):
>       mx31: add GPIO registers definitions
>       dnet: driver for Dave DNET ethernet controller
>       qong: support for Dave/DENX QongEVB-LITE board
>       qong: changes to Dave/DENX Qong configuration
> 
> Nishanth Menon (1):
>       ARM:OMAP3:Zoom1: Add nand unlock option
> 
>  MAINTAINERS                           |    3 +
>  MAKEALL                               |    1 +
>  Makefile                              |    4 +
>  board/davedenx/qong/Makefile          |   53 +++++
>  board/davedenx/qong/config.mk         |    1 +
>  board/davedenx/qong/lowlevel_init.S   |  172 ++++++++++++++
>  board/davedenx/qong/qong.c            |  168 ++++++++++++++
>  board/davedenx/qong/qong_fpga.h       |   41 ++++
>  board/davedenx/qong/u-boot.lds        |   58 +++++
>  drivers/net/Makefile                  |    1 +
>  drivers/net/dnet.c                    |  396 +++++++++++++++++++++++++++++++++
>  drivers/net/dnet.h                    |  166 ++++++++++++++
>  include/asm-arm/arch-mx31/mx31-regs.h |   10 +
>  include/configs/omap3_zoom1.h         |    1 +
>  include/configs/qong.h                |  221 ++++++++++++++++++
>  include/netdev.h                      |    1 +
>  lib_arm/board.c                       |   10 +-
>  17 files changed, 1300 insertions(+), 7 deletions(-)
>  create mode 100644 board/davedenx/qong/Makefile
>  create mode 100644 board/davedenx/qong/config.mk
>  create mode 100644 board/davedenx/qong/lowlevel_init.S
>  create mode 100644 board/davedenx/qong/qong.c
>  create mode 100644 board/davedenx/qong/qong_fpga.h
>  create mode 100644 board/davedenx/qong/u-boot.lds
>  create mode 100644 drivers/net/dnet.c
>  create mode 100644 drivers/net/dnet.h
>  create mode 100644 include/configs/qong.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perl already has an IDE.  It's called Unix.
                      -- Tom Christiansen in 375bd509 at cs.colorado.edu


More information about the U-Boot mailing list