[U-Boot] U-Boot Digest, Vol 9, Issue 275

[Wolfgang Denk]

Dear Peter Griffin,

In message <1235312940.26727.2.camel at quercus-bis> you wrote:
> 
> 
> > i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR
> > Flash , u-boot stored in NOR flash. when i do the saveenv , reset command
> > the u-boot is erased. i'm not able to fix  this issue.  help me to fix this
> > issue
> > 
> On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough.

when replying, please:

* Keep the original poster's subject
* Make sure to includ etheread information

In general, you probably want to read
http://www.netmeister.org/news/learn2quote.html

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Copy from one, it's plagiarism; copy from two, it's research.