[U-Boot] Ethernet PHY LAN8700

[rudresh]

HI gvb

I was trying to print the status of phy registers by putting some debug
statements in adjust_link function of tsec.c (drivers/tsec.c).

I found that after putting these debugs, i could not recreate the problem
and ethernet works fine.

does this mean there is DDR2 initialization problem in my code..?


 



Jerry Van Baren-7 wrote:
> 
> rudresh wrote:
>> Hi,
>> 
>> In Ethernet PHY LAN8700 driver having some issues, during tftp the large
>> file of more than 2MB of the binary file , some time its hangup  &
>> sometime
>> its reset the board. same driver is working in evaluation board  with
>> same
>> PHY & interface . if i tried in customize board the problem is occurring
>> every 2- 3 of iteration. how to fix this issue..
>> 
>> Thanks
>> Rudresh
> 
> Hi Rudresh,
> 
> If your ethernet driver uses DMA, it is probably due to a SDRAM 
> (DDR/DDR2/DDR3) configuration issue (fixable) or a board layout issue 
> (expensive to fix).
> 
> <http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation>
> <http://www.denx.de/wiki/DULG/SDRAM>
> 
> gvb
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/Ethernet-PHY-LAN8700-tp22239868p22246162.html
Sent from the Uboot - Users mailing list archive at Nabble.com.