February 2009 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Feb 1 05:39:30 CET 2009
Ending: Sat Feb 28 19:57:51 CET 2009
Messages: 1952

• [U-Boot] Pull request - net   Ben Warren
  • [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] ПОЗДРАВЛЯЕ   James Martin
  • [U-Boot] [PATCH 1/2] common/console: coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2] common/console: coding style cleanup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] common/console: coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2] common/console: coding style cleanup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 v2] common/console: coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 v2] common/console: coding style cleanup   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 2/2] common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible   Wolfgang Denk
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   monstr at monstr.eu
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Michal Simek
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Ben Warren
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Michal Simek
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Michal Simek
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Ben Warren
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Michal Simek
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Ben Warren
  • [U-Boot] [PATCH 1/1] net: Add Xilinx LL Temac driver version2   Michal Simek
• [U-Boot] [PATCH 1/2] common/console: coding style cleanup   Wolfgang Denk
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] ARM Pull Request   Wolfgang Denk
    • [U-Boot] [PATCH 2/2 V2] common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/2 V2] common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible   Wolfgang Denk
    • [U-Boot] [PATCH] at91sam9xeek: fix soc name   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/2] at91sam9: add watchdog support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] Removed unused CONFIG_CMD_AT91_SPIMUX   Michael Roth
    • [U-Boot] [PATCH] Removed unused CONFIG_CMD_AT91_SPIMUX   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] Removed unused CONFIG_CMD_AT91_SPIMUX   Michael Roth
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Wolfgang Denk
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Mike Frysinger
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Wolfgang Denk
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Mike Frysinger
    • [U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem   Wolfgang Denk
    • [U-Boot] [PATCH V2] at91: allow the lowlevel_init to be overwrite by the board   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH V2] at91: allow the lowlevel_init to be overwrite by the board   Wolfgang Denk
• [U-Boot] [PATCH v3] Add 16bpp BMP support   Mark Jackson
  • [U-Boot] [PATCH v3] Add 16bpp BMP support   Haavard Skinnemoen
    • [U-Boot] [PATCH v3] Add 16bpp BMP support   Mark Jackson
    • [U-Boot] [PATCH v3] Add 16bpp BMP support   Haavard Skinnemoen
• [U-Boot] ПОЗДРАВЛЯЕ   Australia Awrad Inc.
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] IXP Pull Request   Wolfgang Denk
  • [U-Boot] [RFC] fdt expert advice needed   Matthias Fuchs
    • [U-Boot] [RFC] fdt expert advice needed   Scott Wood
• [U-Boot] MIPS: cpu/mips/Makefile: Add a missing START line   Shinya Kuribayashi
  • [U-Boot] MIPS: cpu/mips/Makefile: Add a missing START line   Wolfgang Denk
• [U-Boot] How to do a basic memory test test using BDI??   Afzal Nadirshah
  • [U-Boot] How to do a basic memory test test using BDI??   Wolfgang Denk
    • [U-Boot] [PATCH 0/7] OMAP3: Add some additional improvements and fixes   Dirk Behme
    • [U-Boot] [PATCH 1/7] OMAP3: Overo: Clean up pin mux and GPIO configuration   Dirk Behme
    • [U-Boot] [PATCH 2/7] OMAP3: Beagle: Add board revision detection   Dirk Behme
    • [U-Boot] [PATCH 3/7] OMAP3: Add OMAP3 auto detection   Dirk Behme
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Dirk Behme
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Dirk Behme
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Dirk Behme
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Dirk Behme
    • [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID   Wolfgang Denk
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Dirk Behme
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Dirk Behme
    • [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux   Grazvydas Ignotas
    • [U-Boot] [PATCH 2/7] OMAP3: Beagle: Add board revision detection   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/7] OMAP3: Beagle: Add board revision detection   Dirk Behme
    • [U-Boot] [PATCH 2/7] OMAP3: Beagle: Add board revision detection   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/7] OMAP3: Overo: Clean up pin mux and GPIO configuration   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/7] OMAP3: Overo: Clean up pin mux and GPIO configuration   Dirk Behme
    • [U-Boot] [PATCH 0/7] OMAP3: Add some additional improvements and fixes   Jason Kridner
    • [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 7/7] OMAP3: Clean up MMC code   Dirk Behme
    • [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
• [U-Boot] [PATCH] mflash u-boot support   unsik Kim
  • [U-Boot] [PATCH] mflash u-boot support   Wolfgang Denk
• [U-Boot] Support for both NAND and NOR flashes in one u-boot image   Deven Balani
  • [U-Boot] Support for both NAND and NOR flashes in one u-boot image   Wolfgang Denk
• [U-Boot] PATCH Fix 100Mbs ethernet operation on sh7763 based boards   Simon Munton
  • [U-Boot] PATCH Fix 100Mbs ethernet operation on sh7763 based boards   Nobuhiro Iwamatsu
  • [U-Boot] PATCH Fix 100Mbs ethernet operation on sh7763 based boards   Ben Warren
    • [U-Boot] Allow board specific overwriting of library code   Michael Roth
    • [U-Boot] [PATCH 1/1] Allow board specific overwriting of library code   Michael Roth
• [U-Boot] Winning Notification   annual31nl
  • [U-Boot] [PATCH 0/3] qong: support for Dave/DENX QongEVB-LITE   Ilya Yanok
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Ben Warren
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
  • [U-Boot] [PATCH 3/3] qong: support for Dave/DENX QongEVB-LITE board   Ilya Yanok
  • [U-Boot] [PATCH 3/3] qong: support for Dave/DENX QongEVB-LITE board   Wolfgang Denk
  • [U-Boot] [PATCH 3/3] qong: support for Dave/DENX QongEVB-LITE board   Ilya Yanok
  • [U-Boot] [PATCH 1/3] mx31: add GPIO registers definitions   Ilya Yanok
  • [U-Boot] [PATCH 1/3] mx31: add GPIO registers definitions   Wolfgang Denk
• [U-Boot] need help with flash in U-boot 2009   Pieter
  • [U-Boot] Solved: need help with flash in U-boot 2009   Pieter
• [U-Boot] [ARM] Environment variables not available during console initialisation?   Guennadi Liakhovetski
  • [U-Boot] [ARM] Environment variables not available during console initialisation?   Wolfgang Denk
    • [U-Boot] [ARM] Environment variables not available during console initialisation?   Guennadi Liakhovetski
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Wolfgang Denk
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Guennadi Liakhovetski
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Wolfgang Denk
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Guennadi Liakhovetski
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Wolfgang Denk
      • [U-Boot] [ARM] Environment variables not available during console initialisation?   Scott Wood
      • [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
      • [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [ARM] Environment variables not available during, console initialisation?   Derek Ou
• [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
  • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Wolfgang Denk
    • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Wolfgang Denk
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Ben Warren
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Wolfgang Denk
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Ben Warren
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Ben Warren
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Wolfgang Denk
      • [U-Boot] [PATCH 01/27 v2] Blackfin: bfin_mac: force board_get_enetaddr() usage   Mike Frysinger
• [U-Boot] u-boot environment variable storage   twebb
  • [U-Boot] u-boot environment variable storage   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Becky Bruce
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Pieter
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Kumar Gala
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Becky Bruce
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Stefan Roese
    • [U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys   Stefan Roese
    • [U-Boot] [PATCH 2/2] mpc8641hpcn: Use physical address in flash banks defintion   Becky Bruce
    • [U-Boot] [PATCH 2/2] mpc8641hpcn: Use physical address in flash banks defintion   Wolfgang Denk
    • [U-Boot] [PATCH 6/8 v2] Add support for the Freescale eSDHC found on 8379 and 8536 SoCs   Andy Fleming
    • [U-Boot] [PATCH 7/8 v2] 85xx: Add eSDHC support for 8536 DS   Andy Fleming
    • [U-Boot] [PATCH 8/8 v2] 83xx: Add eSDHC support on 8379 EMDS board   Andy Fleming
    • [U-Boot] Preparing a patch for u-boot   Daniel Jabbour
    • [U-Boot] Preparing a patch for u-boot   Jerry Van Baren
  • [PATCH] ARM:OMAP3:Zoom1: Add nand unlock option   Nishanth Menon
• [U-Boot] [PATCH] ARM:OMAP3:Zoom1: Add nand unlock option   Nishanth Menon
  • [U-Boot] [PATCH] ARM:OMAP3:Zoom1: Add nand unlock option   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson (Boundary Devices)
    • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Wolfgang Denk
    • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson
    • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Wolfgang Denk
    • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson
• [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Trent Piepho
  • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Kim Phillips
    • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Wolfgang Denk
      • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Jon Loeliger
      • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Wolfgang Denk
      • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   ksi at koi8.net
      • [U-Boot] [PATCH] Fix Freescale link scripts for newer GCCs   Trent Piepho
      • [U-Boot] [PATCH] Fix all linker script to handle all rodata sections   Trent Piepho
      • [U-Boot] [PATCH] Fix all linker script to handle all rodata sections   Wolfgang Denk
      • [U-Boot] [PATCH] Fix all linker script to handle all rodata sections   Kim Phillips
• [U-Boot] [PATCH] sh: use write{8,16,32} in ms7720se lowlevel_init   Nobuhiro Iwamatsu
• [U-Boot] u-boot environment variable storage   Pink Boy
  • [U-Boot] u-boot environment variable storage   twebb
• [U-Boot] (no subject)   abby.zhang at semgfab.cn
• [U-Boot] U-Boot Hanging   Afzal Nadirshah
  • [U-Boot] U-Boot Hanging   Feng Kan
• [U-Boot] [PATCH] Add support for the digsy MTC board.   Grzegorz Bernacki
  • [U-Boot] [PATCH v2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH 1/1] arm: fix some arch_number definition   Guennadi Liakhovetski
• [U-Boot] [PATCH] usbtty: Added additional usbtty_configured() checks to get around hang when usb is not connected but multi-io is set up.   Atin Malaviya
  • [U-Boot] [PATCH] ppc4xx: Make PCIE support selectable   Dirk Eibach
  • [U-Boot] [PATCH] ppc4xx: Make PCIE support selectable   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Make PCIE support selectable   Wolfgang Denk
• [U-Boot] Support Kilauea USB   lware2002
  • [U-Boot] Support Kilauea USB   Stefan Roese
    • [U-Boot] Support Kilauea USB   Remy Bohmer
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson (Boundary Devices)
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Peter Tyser
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Wolfgang Denk
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Eric Nelson
      • [U-Boot] [PATCH] Add support for setting environment variable from RAM.   Wolfgang Denk
• [U-Boot] [GIT PULL] Please pull mpc5xxx tree   John Rigby
  • [U-Boot] [GIT PULL] Please pull mpc5xxx tree   Wolfgang Denk
    • [U-Boot] [GIT PULL] Please pull mpc5xxx tree   John Rigby
• [U-Boot] lcd_putc bug?   Derek Ou
  • [U-Boot] lcd_putc bug?   Wolfgang Denk
    • [U-Boot] [PATCH v2] usbtty: Added usbtty_configured() checks. Fixed attribute(packed) warnings.   Atin Malaviya
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
  • [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
    • [U-Boot] [PATCH] integratorap: fix PCI support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] Added usbtty_configured() check. Fixed attribute(packed) warnings.   Atin Malaviya
  • [U-Boot] [PATCH] ppc4xx: Only fixup opb attached UARTs   Matthias Fuchs
    • [U-Boot] [PATCH] ppc4xx: Only fixup opb attached UARTs   Stefan Roese
  • [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3   Tom Rix
    • [U-Boot] [PATCH 1/1] pxa: move mmc drivers to drivers/mmc   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 4/8 V2] Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [GIT PULL] Please pull mpc5xxx tree   John Rigby
  • [U-Boot] [GIT PULL] Please pull mpc5xxx tree   Wolfgang Denk
    • [U-Boot] [PATCH] lcd_putc bug fix for tab.   Derek Ou
    • [U-Boot] [PATCH] lcd_putc bug fix for tab.   Wolfgang Denk
• [U-Boot] using more that 2gig of Memory.   hamoshame Lamoteku
  • [U-Boot] using more that 2gig of Memory.   Kumar Gala
  • [U-Boot] [PATCH 0/7] Blackfin updates for 2009.03 (part 3)   Mike Frysinger
  • [U-Boot] [PATCH 1/7] Blackfin: update anomaly lists   Mike Frysinger
  • [U-Boot] [PATCH 2/7] Blackfin: use on-chip syscontrol() rom function when available   Mike Frysinger
  • [U-Boot] [PATCH 4/7] Blackfin: check for reserved settings in DDR MMRs   Mike Frysinger
  • [U-Boot] [PATCH 5/7] Blackfin: add support for fast SPI reads with Boot ROM   Mike Frysinger
  • [U-Boot] [PATCH 6/7] Blackfin: dynamically update UART speed when initializing   Mike Frysinger
  • [U-Boot] [PATCH 7/7] Blackfin: move default boot SPI CS to common code   Mike Frysinger
  • [U-Boot] [PATCH 3/7] Blackfin: set default voltage levels for BF538/BF539 parts   Mike Frysinger
  • [U-Boot] [PATCH 00/08 V2] Allow PCI bus address, PA, and VA to differ   Becky Bruce
  • [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound   Becky Bruce
  • [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound   Jon Loeliger
  • [U-Boot] 86xx maintainership change?   Kumar Gala
  • [U-Boot] 86xx maintainership change?   Wolfgang Denk
  • [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound   Kumar Gala
  • [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound   Becky Bruce
  • [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound   Wolfgang Denk
  • [U-Boot] [PATCH 2/8] drivers/pci: Create pci_map_bar function   Becky Bruce
  • [U-Boot] [PATCH 2/8] drivers/pci: Create pci_map_bar function   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] powerpc: Move duplicated BAT defines to mmu.h   Becky Bruce
  • [U-Boot] [PATCH 3/8] powerpc: Move duplicated BAT defines to mmu.h   Wolfgang Denk
  • [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs   Becky Bruce
  • [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs   Jon Loeliger
  • [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts   Becky Bruce
  • [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts   Jon Loeliger
  • [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts   Wolfgang Denk
  • [U-Boot] [PATCH 6/8] MPC8641HPCN: Enable CONFIG_ADDR_MAP   Becky Bruce
  • [U-Boot] [PATCH 6/8] MPC8641HPCN: Enable CONFIG_ADDR_MAP   Jon Loeliger
  • [U-Boot] [PATCH 6/8] MPC8641HPCN: Enable CONFIG_ADDR_MAP   Wolfgang Denk
  • [U-Boot] [PATCH 7/8] drivers/block/ahci: Fix pci mapping bug   Becky Bruce
  • [U-Boot] [PATCH 7/8] drivers/block/ahci: Fix pci mapping bug   Wolfgang Denk
  • [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address   Becky Bruce
  • [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address   Jon Loeliger
  • [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address   Wolfgang Denk
  • [U-Boot] [PATCH] tsec: Fix a bug in soft-resetting   Andy Fleming
  • [U-Boot] [PATCH] tsec: Fix a bug in soft-resetting   Peter Tyser
  • [U-Boot] [PATCH] tsec: Fix a bug in soft-resetting   Ben Warren
• [U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3   Tom
  • [U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3   Dirk Behme
    • [U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3   Wolfgang Denk
      • [U-Boot] [PATCH] Fix compiler warning   Wolfgang Denk
      • [U-Boot] [PATCH] Fix compiler warning   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] Fix compiler warning   Wolfgang Denk
• [U-Boot] running U-boot from ram   Jon Burrows
  • [U-Boot] running U-boot from ram   Wolfgang Denk
• [U-Boot] coldfire M5329EVB demo problem   kescuin
  • [U-Boot] coldfire M5329EVB demo problem   Wolfgang Denk
    • [U-Boot] coldfire M5329EVB demo problem   kescuin
      • [U-Boot] coldfire M5329EVB demo problem   kescuin
      • [U-Boot] coldfire M5329EVB demo problem   Wolfgang Denk
      • [U-Boot] coldfire M5329EVB demo problem   kescuin
  • [U-Boot] coldfire M5329EVB demo problem   TC Liew
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Grzegorz Bernacki
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Ben Warren
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Grzegorz Bernacki
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Ben Warren
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Grzegorz Bernacki
    • [U-Boot] [PATCH v3] Add support for the digsy MTC board.   Ben Warren
    • [U-Boot] [PATCH 0/2] Initial Stamp9261 board support   Michael Roth
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Michael Roth
    • [U-Boot] [PATCH 2/2] Stamp9261 board support   Michael Roth
    • [U-Boot] [PATCH 2/2] Stamp9261 board support   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] Stamp9261 board support   Michael Roth
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Jerry Van Baren
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Michael Roth
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Michael Roth
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Mike Frysinger
    • [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code   Wolfgang Denk
• [U-Boot] can't update U-boot when booting with BDI2000   hendrik
  • [U-Boot] can't update U-boot when booting with BDI2000   Wolfgang Denk
    • [U-Boot] can't update U-boot when booting with BDI2000   Pieter
• [U-Boot] [PATCH 05/07 V2] Coldfire: M5271EVB: Board header update (dependencies)   Richard Retanubun
• [U-Boot] [PATCH 01/07] [REBASED] Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list.   Richard Retanubun
• [U-Boot] [PATCH 02/07 V2] [REBASED] Coldfire: cmd_bdinfo cleanup   Richard Retanubun
  • [U-Boot] [PATCH] 85xx: Format cpu freq printing to handle 8 cores   Kumar Gala
• [U-Boot] [PATCH 03/07] [REBASED] Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C   Richard Retanubun
• [U-Boot] [PATCH 04/07] [REBASED] Coldfire: M5271: Allow board header file to specify clock multiplier   Richard Retanubun
• [U-Boot] [PATCH 06/07] [REBASED] Coldfire: Applied baudrate formula of serial_init to serial_setbrg   Richard Retanubun
  • [U-Boot] [PATCH 06/07] [REBASED V2] Coldfire: Applied baudrate formula of serial_init to serial_setbrg   Richard Retanubun
    • [U-Boot] [PATCH] MPC8349ITX: support of DDR > 256MB   Valeriy Glushkov
• [U-Boot] [PATCH 07/07] [REBASED] Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command.   Richard Retanubun
  • [U-Boot] [PATCH v2] MPC8349ITX: several config issues fixed   Valeriy Glushkov
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Valeriy Glushkov
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Kim Phillips
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Timur Tabi
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Kumar Gala
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Timur Tabi
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Kim Phillips
  • [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Kumar Gala
• [U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Guennadi Liakhovetski
  • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Guennadi Liakhovetski
    • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Wolfgang Denk
      • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Scott Wood
      • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Wolfgang Denk
      • [U-Boot] MPC8548_eTSEC to Marvell 88E1145 E0 version Phy Initialization   Ajeesh Kumar
    • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Mike Frysinger
      • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Guennadi Liakhovetski
      • [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers   Mike Frysinger
  • [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver   Guennadi Liakhovetski
    • [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver   Magnus Lilja
    • [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver   Guennadi Liakhovetski
    • [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
    • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Anatolij Gustschin
      • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
    • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Wolfgang Denk
    • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
  • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
    • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Magnus Lilja
      • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Wolfgang Denk
    • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Wolfgang Denk
      • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
    • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Anatolij Gustschin
      • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
    • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
      • [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung   Wolfgang Denk
  • [U-Boot] [PATCH 5/9] ARM: remove unused variable   Guennadi Liakhovetski
    • [U-Boot] [PATCH 5/9] ARM: remove unused variable   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 5/9] ARM: remove unused variable   Guennadi Liakhovetski
      • [U-Boot] [PATCH 5/9] ARM: remove unused variable   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Guennadi Liakhovetski
    • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Wolfgang Denk
      • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Guennadi Liakhovetski
    • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Anatolij Gustschin
      • [U-Boot] [PATCH 6/9] Add 16bpp BMP support   Anatolij Gustschin
  • [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays   Guennadi Liakhovetski
    • [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far   Guennadi Liakhovetski
    • [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far   Magnus Lilja
      • [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far   Guennadi Liakhovetski
      • [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far   Magnus Lilja
      • [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far   Wolfgang Denk
  • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
    • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
      • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Wolfgang Denk
      • [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
  • [U-Boot] [PATCH 0/9 v2] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Guennadi Liakhovetski
    • [U-Boot] [PATCH 1/9 v2] i.MX31: fix SPI driver for shorter than 32 bit transfers   Guennadi Liakhovetski
    • [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver   Anatolij Gustschin
    • [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Anatolij Gustschin
      • [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Anatolij Gustschin
    • [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
      • [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung   Anatolij Gustschin
      • [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
      • [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung   Anatolij Gustschin
    • [U-Boot] [PATCH 5/9 v2] ARM: remove unused variable   Guennadi Liakhovetski
    • [U-Boot] [PATCH 6/9 v2] Add 16bpp BMP support   Guennadi Liakhovetski
    • [U-Boot] [PATCH 7/9 v2] LCD: support 8bpp BMPs on 16bpp displays   Guennadi Liakhovetski
    • [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver   Anatolij Gustschin
    • [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
      • [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board   Anatolij Gustschin
    • [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Guennadi Liakhovetski
      • [U-Boot] [PATCH 1/9 v3] i.MX31: fix SPI driver for shorter than 32 bit transfers   Guennadi Liakhovetski
      • [U-Boot] [PATCH 1/9 v3] i.MX31: fix SPI driver for shorter than 32 bit transfers   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Anatolij Gustschin
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Anatolij Gustschin
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Anatolij Gustschin
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio driver   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio driver   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver   Anatolij Gustschin
      • [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 3/9 v3] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 3/9 v3] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung   Guennadi Liakhovetski
      • [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung   Anatolij Gustschin
      • [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung   Wolfgang Denk
      • [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung   Anatolij Gustschin
      • [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung   Wolfgang Denk
      • [U-Boot] [PATCH 5/9 v3] ARM: remove unused variable   Guennadi Liakhovetski
      • [U-Boot] [PATCH 5/9 v3] ARM: remove unused variable   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 6/9 v3] Add 16bpp BMP support   Guennadi Liakhovetski
      • [U-Boot] [PATCH 6/9 v3] Add 16bpp BMP support   Anatolij Gustschin
      • [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays   Guennadi Liakhovetski
      • [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays   Anatolij Gustschin
      • [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays   Guennadi Liakhovetski
      • [U-Boot] [PATCH 8/9 v3] video: add an i.MX31 framebuffer driver   Guennadi Liakhovetski
      • [U-Boot] [PATCH 8/9 v3] video: add an i.MX31 framebuffer driver   Anatolij Gustschin
      • [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
      • [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board   Anatolij Gustschin
      • [U-Boot] [PATCH 9/9 v4] ARM: add an "eet" variant of the imx31_phycore board   Guennadi Liakhovetski
      • [U-Boot] [PATCH 9/9 v4] ARM: add an "eet" variant of the imx31_phycore board   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 9/9 v4] ARM: add an "eet" variant of the imx31_phycore board   Anatolij Gustschin
      • [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Anatolij Gustschin
      • [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Guennadi Liakhovetski
      • [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 35   postmaster at paran.com
• [U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 33   postmaster at paran.com
  • [U-Boot] [PATCH] nand_base: Silence warning when CONFIG_SYS_NAND_QUIET_TEST   Peter Tyser
  • [U-Boot] [PATCH] nand_base: Silence warning when CONFIG_SYS_NAND_QUIET_TEST   Scott Wood
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Peter Tyser
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Scott Wood
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Peter Tyser
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Scott Wood
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Wolfgang Denk
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Peter Tyser
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Wolfgang Denk
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Scott Wood
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Wolfgang Denk
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Peter Tyser
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Scott Wood
  • [U-Boot] [PATCH] nand_base: Add timeout for NAND reset command   Scott Wood
• [U-Boot] ARM mach-types.h sync request   Tom
• [U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 39   postmaster at paran.com
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Peter Tyser
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Andy Fleming
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Wolfgang Denk
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Peter Tyser
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Andy Fleming
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Peter Tyser
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Jerry Van Baren
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Andy Fleming
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Jerry Van Baren
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Andy Fleming
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Jerry Van Baren
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Scott Wood
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Peter Tyser
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Scott Wood
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Wolfgang Denk
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Scott Wood
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Wolfgang Denk
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Jerry Van Baren
  • [U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link   Ben Warren
  • [U-Boot] [RFC] [PATCH] at91: add support for PM9263 board   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [RFC] [PATCH] at91: add support for PM9263 board   Wolfgang Denk
  • [U-Boot] [RFC] [PATCH] at91: add support for PM9263 board   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] qong: changes to Dave/DENX Qong configuration   Ilya Yanok
    • [U-Boot] [PATCH 0/3][v2] qong: support for Dave/DENX QongEVB-LITE   Ilya Yanok
    • [U-Boot] [PATCH 1/3][v2] mx31: add GPIO registers definitions   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v2] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v2] dnet: driver for Dave DNET ethernet controller   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 3/3][v2] qong: support for Dave/DENX QongEVB-LITE board   Ilya Yanok
    • [U-Boot] [PATCH 3/3][v2] qong: support for Dave/DENX QongEVB-LITE board   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 3/3][v2] qong: support for Dave/DENX QongEVB-LITE board   Wolfgang Denk
    • [U-Boot] [PATCH] cfi_flash: Silence compilation warning   Stefan Roese
    • [U-Boot] [PATCH] cfi_flash: Fix typo in cfi_flash.c   Stefan Roese
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Stefan Roese
  • [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
  • [U-Boot] Fantastic Prize   LG
• [U-Boot] U-Boot Digest, Vol 9, Issue 49   null
  • [U-Boot] U-Boot Digest, Vol 9, Issue 49   Wolfgang Denk
    • [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334   Valeriy Glushkov
    • [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334   Kim Phillips
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Michael Roth
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Michael Roth
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Wolfgang Denk
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Wolfgang Denk
• [U-Boot] Kernel Uncompressing failed under Uboot   Gurumurthy Gowdar
  • [U-Boot] Kernel Uncompressing failed under Uboot   Wolfgang Denk
    • [U-Boot] Kernel Uncompressing failed under Uboot   Gurumurthy Gowdar
      • [U-Boot] Kernel Uncompressing failed under Uboot   Jean-Michel Hautbois
• [U-Boot] What is the corect way to define MTD partitions   Pieter
• [U-Boot] [PATCH] Coldfire: M527x: Add missing GPIO register address defines   Richard Retanubun
• [U-Boot] Flag -mno-cache-volatile to bypass the cache   ivanchuklist ivanchu
  • [U-Boot] Flag -mno-cache-volatile to bypass the cache   Wolfgang Denk
    • [U-Boot] Flag -mno-cache-volatile to bypass the cache   ivanchuklist ivanchu
      • [U-Boot] Flag -mno-cache-volatile to bypass the cache   Wolfgang Denk
      • [U-Boot] Flag -mno-cache-volatile to bypass the cache   ivanchuklist ivanchu
      • [U-Boot] Flag -mno-cache-volatile to bypass the cache   ivanchuklist ivanchu
    • [U-Boot] Flag -mno-cache-volatile to bypass the cache   Scott McNutt
• [U-Boot] unassigned-patches/34: [PATCH] Add support for setting environment variable from RAM.   u-boot at bugs.denx.de
  • [U-Boot] unassigned-patches/34: [PATCH] Add support for setting environment variable from RAM.   Eric Nelson
    • [U-Boot] [PATCH 1/2] 86xx: Update Global Utilities structure   Peter Tyser
    • [U-Boot] [PATCH 2/2] 86xx: Reset update   Peter Tyser
• [U-Boot] CONFIG_MP affects ability to erase upper portions of flash on 8572   Scott Coulter
  • [U-Boot] CONFIG_MP affects ability to erase upper portions of flash on 8572   Kumar Gala
  • [U-Boot] CONFIG_MP affects ability to erase upper portions of flash on 8572   Scott Coulter
  • [U-Boot] CONFIG_MP affects ability to erase upper portions of flash on 8572   Peter Tyser
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Peter Tyser
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Kumar Gala
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Peter Tyser
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Kumar Gala
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Peter Tyser
  • [U-Boot] [PATCH] 86xx: Update CPU info output on bootup   Kumar Gala
• [U-Boot] u-boot Ethernet connection timeout with a Ethernet Switch (target board MPC8548)   Qingyu Song
• [U-Boot] Fwd: u-boot environment variable storage   twebb
• [U-Boot] ppc_4xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)   Pawel Pastuszak
  • [U-Boot] ppc_4xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)   Matthias Fuchs
  • [PATCH 4/7] OMAP3: Update pandora pin mux   Grazvydas Ignotas
• [U-Boot] RW filesystem support for new eMMC, eSD and eLBA flash devices   twebb
• [U-Boot] unassigned-patches/34   u-boot at bugs.denx.de
• [U-Boot] [PATCH RFC] at91sam9/at91cap: move common initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] Blackfin: disable NetBSD by default since no port exists   Mike Frysinger
  • [U-Boot] [PATCH] Blackfin: disable NetBSD by default since no port exists   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile   Mike Frysinger
  • [U-Boot] [PATCH] common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile   Wolfgang Denk
  • [U-Boot] [PATCH] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Mike Frysinger
  • [U-Boot] [PATCH] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Wolfgang Denk
  • [U-Boot] [PATCH] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Mike Frysinger
  • [U-Boot] [PATCH] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Wolfgang Denk
  • [U-Boot] [PATCH] net/sntp.c: move ifdef into Makefile COBJS-$(...)   Mike Frysinger
  • [U-Boot] [PATCH] net/sntp.c: move ifdef into Makefile COBJS-$(...)   Ben Warren
  • [U-Boot] [PATCH] bzip2: move ifdef handling to Makefile COBJS-$(...)   Mike Frysinger
  • [U-Boot] [PATCH] bzip2: move ifdef handling to Makefile COBJS-$(...)   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] Add an architecture specific config.h for common defines   Kumar Gala
  • [U-Boot] [PATCH 1/2] Add an architecture specific config.h for common defines   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2] Add an architecture specific config.h for common defines   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h   Kumar Gala
  • [U-Boot] [PATCH 2/2] ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h   Stefan Roese
  • [U-Boot] [PATCH 2/2] ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h   Wolfgang Denk
• [U-Boot] [PATCH] Fix whitespace damage: double space changed to a tab   Jerry Van Baren
  • [U-Boot] [PATCH] Fix whitespace damage: double space changed to a tab   Wolfgang Denk
• [U-Boot] U-Boot compile error   Afzal Nadirshah
  • [U-Boot] U-Boot compile error   Feng Kan
    • [U-Boot] U-Boot compile error   Afzal Nadirshah
      • [U-Boot] U-Boot compile error   Wolfgang Denk
      • [U-Boot] powerpc flush_cache() roll over bug   Kumar Gala
      • [U-Boot] powerpc flush_cache() roll over bug   Jerry Van Baren
      • [U-Boot] powerpc flush_cache() roll over bug   Kumar Gala
      • [U-Boot] [PATCH] net: removed board-specific CONFIGs from MPC5xxx FEC driver   Ben Warren
• [U-Boot] [PATCH]V3 NAND_SPL support for phycore imx31   Magnus Lilja
• [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Guennadi Liakhovetski
  • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Wolfgang Denk
    • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Guennadi Liakhovetski
      • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Wolfgang Denk
      • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Sascha Hauer
      • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Guennadi Liakhovetski
    • [U-Boot] U-boot level MPC8548 Ethernet internal/External Loop back testing   Ajeesh Kumar
  • [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
  • [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] Use of Netconsole   Piyush Shah
  • [U-Boot] Use of Netconsole   Piyush Shah
    • [U-Boot] Use of Netconsole   Wolfgang Denk
• [U-Boot] Uncompressing Kernel Image ... Error: Bad gzipped data   Gurumurthy Gowdar
  • [U-Boot] [PATCH] ppc: Fix roll over bug in flush_cache()   Kumar Gala
  • [U-Boot] [PATCH] ppc: Fix roll over bug in flush_cache()   Wolfgang Denk
  • [U-Boot] [PATCH v2 0/2] at91: serial initialization cleanup   Michael Roth
  • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Michael Roth
  • [U-Boot] [PATCH] at91: Factored out common serial hardware initialization   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] at91: CONFIG_USART3 renamed to CONFIG_USART_DBGU   Michael Roth
• [U-Boot] CRAMFS byte oder question   hendrik
  • [U-Boot] CRAMFS byte oder question   Wolfgang Denk
    • [U-Boot] [PATCH 02/11] mpc8641hpcn: Set up outbound pci windows before inbound   Kumar Gala
    • [U-Boot] [PATCH] pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity   Kumar Gala
    • [U-Boot] [PATCH 1/2] pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity   Kumar Gala
    • [U-Boot] [PATCH 1/2] pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching   Kumar Gala
    • [U-Boot] [PATCH 2/2] pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller   Kumar Gala
    • [U-Boot] [PATCH 2/2] 85xx: Fix how we map DDR memory   Kumar Gala
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Peter Tyser
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Wolfgang Denk
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Peter Tyser
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Mike Frysinger
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Peter Tyser
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Mike Frysinger
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Peter Tyser
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Mike Frysinger
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Remy Bohmer
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Wolfgang Denk
    • [U-Boot] [PATCH][RFC] Add native win32 mkimage support   Remy Bohmer
• [U-Boot] DaVinci Evaluation Platforms   Ing.G.Morandi (Portatile)
  • [U-Boot] DaVinci Evaluation Platforms   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] DaVinci Evaluation Platforms   Wolfgang Denk
    • [U-Boot] DaVinci Evaluation Platforms   Ing.G.Morandi (Portatile)
      • [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
      • [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Setup extra MIMC200 chip selects   Mark Jackson
  • [U-Boot] [PATCH v2] 86xx: Update CPU info output on bootup   Peter Tyser
  • [U-Boot] [PATCH v2] 86xx: Update CPU info output on bootup   Kumar Gala
  • [U-Boot] [PATCH v2] 86xx: Update CPU info output on bootup   Peter Tyser
  • [U-Boot] [PATCH v2] 86xx: Update CPU info output on bootup   Kumar Gala
  • [U-Boot] [PATCH v2][RFC] Add native win32 mkimage support   Peter Tyser
  • [U-Boot] [PATCH v2][RFC] Add native win32 mkimage support   Mike Frysinger
  • [U-Boot] [PATCH v2][RFC] Add native win32 mkimage support   Peter Tyser
  • [U-Boot] [PATCH v2][RFC] Add native win32 mkimage support   Mike Frysinger
• [U-Boot] [PATCH] Create configuration option for restricted ns16550 functions   Ron Madrid
• [U-Boot] [PATCH] Add support W90P710 ARM SoC from Nuvoton   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [GIT PULL] Please pull coldfire tree   John Rigby
  • [U-Boot] [GIT PULL] Please pull coldfire tree   Wolfgang Denk
• [U-Boot] [patch V3] [1/3] PNX8181 SOC support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [patch V3] [1/3] PNX8181 SOC support   Jürgen Schöw
• [U-Boot] [patch V3] [2/3] ip3912 network driver   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [patch V3] [2/3] ip3912 network driver   Ben Warren
  • [U-Boot] [patch V3] [2/3] ip3912 network driver   Jürgen Schöw
• [U-Boot] [patch V3] [3/3] firetux board support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH v2] nand: Fixed invalid pointers to static relocated chip names   Scott Wood
  • [U-Boot] Pull request: nand flash   Scott Wood
    • [U-Boot] Pull request: nand flash   Wolfgang Denk
  • [U-Boot] PATCH: Fix MPC8260 with ethernet on SCC   ksi at koi8.net
    • [U-Boot] PATCH: Fix MPC8260 with ethernet on SCC   Ben Warren
      • [U-Boot] PATCH: Fix MPC8260 with ethernet on SCC   Heiko Schocher
      • [U-Boot] PATCH: Fix MPC8260 with ethernet on SCC   Wolfgang Denk
  • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   ksi at koi8.net
    • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Wolfgang Denk
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Wolfgang Denk
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 0/8 Multi-adapter multi-bus I2C   Wolfgang Denk
  • [U-Boot] PATCH 1/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C   ksi at koi8.net
    • [U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C   Wolfgang Denk
      • [U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 3/8 Multi-adapter multi-bus I2C   ksi at koi8.net
    • [U-Boot] PATCH 3/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 3/8 Multi-adapter multi-bus I2C   ksi at koi8.net
      • [U-Boot] PATCH 3/8 Multi-adapter multi-bus I2C   Heiko Schocher
  • [U-Boot] PATCH 4/8 Multi-adapter multi-bus I2C   ksi at koi8.net
    • [U-Boot] PATCH 4/8 Multi-adapter multi-bus I2C   Heiko Schocher
      • [U-Boot] PATCH 4/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 5/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 6/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 7/8 Multi-adapter multi-bus I2C   ksi at koi8.net
  • [U-Boot] PATCH 8/8 Multi-adapter multi-bus I2C   ksi at koi8.net
• [U-Boot] [PATCH] Nand driver for Nomadik SoC   Alessandro Rubini
  • [U-Boot] [PATCH v2] Nand driver for Nomadik SoC   Alessandro Rubini
    • [U-Boot] [PATCH v2] Nand driver for Nomadik SoC   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Alessandro Rubini
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Stefan Roese
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Alessandro Rubini
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Stefan Roese
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Scott Wood
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Alessandro Rubini
      • [U-Boot] [PATCH v3] Nand driver for Nomadik SoC   Scott Wood
• [U-Boot] lcd   Anusha Bhat
  • [U-Boot] lcd   Dirk Behme
  • [U-Boot] lcd   Nishanth Menon
    • [U-Boot] [PATCH 1/1] arm: add uart dcc support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/1] arm: add uart dcc support   Dirk Behme
    • [U-Boot] [PATCH 1/1] arm: add uart dcc support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/1] arm: add uart dcc support   Wolfgang Denk
• [U-Boot] [PATCH] Enable Ethernet for Nomadik 8815 Eval Kit   Alessandro Rubini
  • [U-Boot] [PATCH v2] Enable Ethernet for Nomadik 8815 Eval Kit   Alessandro Rubini
    • [U-Boot] [PATCH 0/3][v3] qong: support for Dave/DENX QongEVB-LITE   Ilya Yanok
    • [U-Boot] [PATCH 1/3][v3] mx31: add GPIO registers definitions   Ilya Yanok
    • [U-Boot] [PATCH 1/3][v3] mx31: add GPIO registers definitions   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Ben Warren
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Wolfgang Denk
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v4] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v3] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v5] dnet: driver for Dave DNET ethernet controller   Ilya Yanok
    • [U-Boot] [PATCH 2/3][v5] dnet: driver for Dave DNET ethernet controller   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/3][v5] dnet: driver for Dave DNET ethernet controller   Ben Warren
    • [U-Boot] [PATCH 3/3][v3] qong: support for Dave/DENX QongEVB-LITE board   Ilya Yanok
    • [U-Boot] [PATCH 0/3][v3] qong: support for Dave/DENX QongEVB-LITE   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] IMX27 nand_probe problem   Sascha Hauer
• [U-Boot] ref: pxa270 USB KEYBOARD   Paul Wang
• [U-Boot] bmp   Anusha Bhat
  • [U-Boot] support the Pentium M (Dothan) boot on U-boot?   Yongda Shin
    • [U-Boot] support the Pentium M (Dothan) boot on U-boot?   Graeme Russ
    • [U-Boot] support the Pentium M (Dothan) boot on U-boot?   Wolfgang Denk
• [U-Boot] [patch V3] [2/3] ip3912 network driver   Ben Warren
  • [U-Boot] [PATCH] ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE   Dirk Eibach
  • [U-Boot] [PATCH] ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE   Stefan Roese
• [U-Boot] usbtty-upload issue   arjun rath
• [U-Boot] [PATCH 1/3] Add support for W90P710 ARM7 SoC   Vovk Konstantin
  • [U-Boot] [PATCH 1/3] Add support for W90P710 ARM7 SoC   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/3] Add support for W90P710 ARM7 SoC   Konstantin Vovk
      • [U-Boot] [PATCH 1/3] Add support for W90P710 ARM7 SoC   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/3] Add support for W90P710 ARM7 SoC   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface   Vovk Konstantin
  • [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface   Ben Warren
• [U-Boot] [PATCH 3/3] Add W90P1board based on W90P710 ARM SoC   Vovk Konstantin
  • [U-Boot] [PATCH 3/3] Add W90P1board based on W90P710 ARM SoC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] u-boot -kernel-   Maphin Philip
  • [U-Boot] u-boot -kernel-   Wolfgang Denk
• [U-Boot] fw_setenv not working   M SANDEEP-TVF386
  • [U-Boot] fw_setenv not working   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Drivers for nomadik 8815 board   Alessandro Rubini
  • [U-Boot] [PATCH 1/3] Added nomadik.h header   Alessandro Rubini
  • [U-Boot] [PATCH 2/3] Nand driver for Nomadik SoC   Alessandro Rubini
    • [U-Boot] [PATCH 2/3] Nand driver for Nomadik SoC   Alessandro Rubini
      • [U-Boot] [PATCH 2/3] Nand driver for Nomadik SoC   Scott Wood
  • [U-Boot] [PATCH 3/3] Enable Ethernet for Nomadik 8815 Evaluation Kit   Alessandro Rubini
    • [U-Boot] DNS Resolution for serverip-environment-variable?   adam.cartwright at bossmail.de
    • [U-Boot] DNS Resolution for serverip-environment-variable?   Wolfgang Denk
• [U-Boot] DaVinci Evaluation Platforms   Maupin, Chase
• [U-Boot] [patch V3] [2/3] ip3912 network driver   Wolfgang Denk
• [U-Boot] [patch V3] [3/3] firetux board support   Wolfgang Denk
  • [U-Boot] [patch V3] [3/3] firetux board support   Jürgen Schöw
    • [U-Boot] [patch V3] [3/3] firetux board support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Ben Warren
    • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Michal Simek
      • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Stefan Roese
      • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Michal Simek
      • [U-Boot] [PATCH 1/2] net: Sort Makefile labels   Ben Warren
      • [U-Boot] [PATCH 1/1 v3] ppc4xx: Autocalibration can set RDCC to over aggressive value.   Adam Graham
      • [U-Boot] [PATCH 1/1 v3] ppc4xx: Autocalibration can set RDCC to over aggressive value.   Stefan Roese
• [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Wolfgang Denk
  • [U-Boot] [PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH] USB: Remove LUN number from CDB   Wolfgang Denk
  • [U-Boot] [PATCH] USB: Remove LUN number from CDB   Remy Bohmer
    • [U-Boot] [PATCH] USB: Remove LUN number from CDB   Remy Bohmer
• [U-Boot] 82xx serial, smc: add configurable SMC Rx buffer len   Wolfgang Denk
• [U-Boot] 82xx serial, smc: Coding-Style cleanup serial SMC driver   Wolfgang Denk
• [U-Boot] u-boot Atheros AP81 router platform, TP-Link (and others) possible GPL violation?   Stephen Gutknecht (hilltx)
  • [U-Boot] u-boot Atheros AP81 router platform, TP-Link (and others) possible GPL violation?   Stephen Gutknecht
• [U-Boot] [PATCH 1/3] 85xx: Use BR_ADDR macro for NAND chipselects   Andy Fleming
• [U-Boot] [PATCH 2/3] 85xx: Handle eLBC difference w/36-bit physical   Andy Fleming
• [U-Boot] [PATCH 3/3] 85xx: Add a 36-bit physical configuration for MPC8572DS   Andy Fleming
  • [U-Boot] [PATCH 3/3] 85xx: Add a 36-bit physical configuration for MPC8572DS   Kumar Gala
  • [U-Boot] [PATCH] 85xx: Fix bug in device tree setup in 36-bit physical confg   Kumar Gala
  • [U-Boot] [PATCH] 85xx: Fix address map for 36-bit config of MPC8572DS   Kumar Gala
  • [U-Boot] [PATCH 00/42] Updates cookin for Blackfin for post 2009.03   Mike Frysinger
  • [U-Boot] [PATCH 03/42] Blackfin: add cache_dump commands   Mike Frysinger
  • [U-Boot] [PATCH 04/42] Blackfin: print out Flash: before checking it   Mike Frysinger
  • [U-Boot] [PATCH 05/42] Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX   Mike Frysinger
  • [U-Boot] [PATCH 06/42] Blackfin: unify duplicate CPU port definitions   Mike Frysinger
  • [U-Boot] [PATCH 07/42] Blackfin: drop SPORT_TX read helper macros   Mike Frysinger
  • [U-Boot] [PATCH 08/42] Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits   Mike Frysinger
  • [U-Boot] [PATCH 09/42] Blackfin: simplify symbol_lookup() a bit   Mike Frysinger
  • [U-Boot] [PATCH 10/42] Blackfin: kill off LDR jump block   Mike Frysinger
  • [U-Boot] [PATCH 11/42] Blackfin: handle reboot anomaly 432   Mike Frysinger
  • [U-Boot] [PATCH 12/42] Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers   Mike Frysinger
  • [U-Boot] [PATCH 13/42] Blackfin: do not program voltage regulator on parts that do not have one   Mike Frysinger
  • [U-Boot] [PATCH 14/42] Blackfin: put memory into self-refresh before/after programming clocks   Mike Frysinger
  • [U-Boot] [PATCH 15/42] Blackfin: unify common ADI board settings   Mike Frysinger
  • [U-Boot] [PATCH 16/42] Blackfin: bf533-stamp: rewrite startup LED notifications   Mike Frysinger
  • [U-Boot] [PATCH 17/42] Blackfin: bf533-stamp: bump up default clocks   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Ben Warren
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Ben Warren
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Wolfgang Denk
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Wolfgang Denk
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Wolfgang Denk
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Mike Frysinger
  • [U-Boot] [PATCH 18/42] Blackfin: make sure autoconf.mk is generated early enough   Wolfgang Denk
  • [U-Boot] [PATCH 19/42] Blackfin: new spibootldr command   Mike Frysinger
  • [U-Boot] [PATCH 20/42] Blackfin: add clkin_hz= to default kernel command line for ADI boards   Mike Frysinger
  • [U-Boot] [PATCH 21/42] Blackfin: bf537-stamp: bump default SCLK up to 125MHz   Mike Frysinger
  • [U-Boot] [PATCH 22/42] Blackfin: bf537-stamp: increase monitor size   Mike Frysinger
  • [U-Boot] [PATCH 23/42] Blackfin: add hack for crappy m25p80   Mike Frysinger
  • [U-Boot] [PATCH 24/42] Blackfin: add support for SST SPI flashes   Mike Frysinger
  • [U-Boot] [PATCH 25/42] Blackfin: overhaul SPI flash handling to speed things up   Mike Frysinger
  • [U-Boot] [PATCH 26/42] Blackfin: add support for S25FL128 parts   Mike Frysinger
  • [U-Boot] [PATCH 27/42] Blackfin: bf548-ezkit: new board port   Mike Frysinger
  • [U-Boot] [PATCH 28/42] Blackfin: bf527-ezkit: new board port   Mike Frysinger
  • [U-Boot] [PATCH 29/42] Blackfin: bf538f-ezkit: new board port   Mike Frysinger
  • [U-Boot] [PATCH 30/42] Blackfin: bf526-ezbrd: new board port   Mike Frysinger
  • [U-Boot] [PATCH 31/42] Blackfin: bf518f-ezbrd: new board port   Mike Frysinger
  • [U-Boot] [PATCH 32/42] Blackfin: cm-bf533: new board port   Mike Frysinger
  • [U-Boot] [PATCH 32/42] Blackfin: cm-bf533: new board port   Wolfgang Denk
  • [U-Boot] [PATCH 33/42] Blackfin: cm-bf537e: new board port   Mike Frysinger
  • [U-Boot] [PATCH 33/42] Blackfin: cm-bf537e: new board port   Wolfgang Denk
  • [U-Boot] [PATCH 33/42] Blackfin: cm-bf537e: new board port   Mike Frysinger
  • [U-Boot] [PATCH 34/42] Blackfin: cm-bf561: new board port   Mike Frysinger
  • [U-Boot] [PATCH 35/42] Blackfin: tcm-bf537: new board port   Mike Frysinger
  • [U-Boot] [PATCH 36/42] Blackfin: cm-bf548: new board port   Mike Frysinger
  • [U-Boot] [PATCH 36/42] Blackfin: cm-bf548: new board port   Scott Wood
  • [U-Boot] [PATCH 36/42] Blackfin: cm-bf548: new board port   Mike Frysinger
  • [U-Boot] [PATCH 37/42] Blackfin: cm-bf527: new board port   Mike Frysinger
  • [U-Boot] [PATCH 38/42] Blackfin: bf537-pnav: new board port   Mike Frysinger
  • [U-Boot] [PATCH 39/42] Blackfin: bf537-minotaur: new board port   Mike Frysinger
  • [U-Boot] [PATCH 40/42] Blackfin: bf537-srv1: new board port   Mike Frysinger
  • [U-Boot] [PATCH 41/42] Blackfin: blackstamp: new board port   Mike Frysinger
  • [U-Boot] [PATCH 42/42] Blackfin: ibf-dsp561: new board port   Mike Frysinger
  • [U-Boot] [PATCH 01/42] Blackfin: update lockbox api according to latest documentation   Mike Frysinger
  • [U-Boot] [PATCH 02/42] Blackfin: safely flush data caches when in writeback mode   Mike Frysinger
• [U-Boot] [PATCH] mflash u-boot support (a little change)   unsik Kim
  • [U-Boot] [PATCH] mflash u-boot support (a little change)   Wolfgang Denk
• [U-Boot] Pull request - net   Ben Warren
  • [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] Enabling POST on the canyon lands board   Afzal Nadirshah
  • [U-Boot] Enabling POST on the canyon lands board   Wolfgang Denk
• [U-Boot] [Fwd: Re: PATCH 2/8 Multi-adapter multi-bus I2C]   Heiko Schocher
  • [U-Boot] [PATCH] musb: add timeout via CONFIG_MUSB_TIMEOUT   Mike Frysinger
  • [U-Boot] [PATCH] musb: add timeout via CONFIG_MUSB_TIMEOUT   Remy Bohmer
  • [U-Boot] [PATCH] musb: add timeout via CONFIG_MUSB_TIMEOUT   Mike Frysinger
• [U-Boot] fw_setenv not working   Wolfgang Denk
• [U-Boot] 8xx serial, smc: add configurable SMC Rx buffer len   Heiko Schocher
  • [U-Boot] 8xx serial, smc: add configurable SMC Rx buffer len   Wolfgang Denk
• [U-Boot] 8xx serial, smc: Coding-Style cleanup serial SMC driver   Heiko Schocher
  • [U-Boot] 8xx serial, smc: Coding-Style cleanup serial SMC driver   Wolfgang Denk
• [U-Boot] netloop: speed up NetLoop   Heiko Schocher
  • [U-Boot] netloop: speed up NetLoop   Wolfgang Denk
  • [U-Boot] netloop: speed up NetLoop   Ben Warren
  • [U-Boot] netloop: speed up NetLoop   Mike Frysinger
    • [U-Boot] netloop: speed up NetLoop   Heiko Schocher
  • [U-Boot] netloop: speed up NetLoop   Mike Frysinger
    • [U-Boot] netloop: speed up NetLoop   Heiko Schocher
• [U-Boot] cfi: make flash_get_info() non static   Heiko Schocher
  • [U-Boot] cfi: make flash_get_info() non static   Stefan Roese
• [U-Boot] lcd   Anusha Bhat
• [U-Boot] Atmel AT91 USB Device Controller Driver   Fabio Porcedda
  • [U-Boot] Atmel AT91 USB Device Controller Driver   Remy Bohmer
    • [U-Boot] Atmel AT91 USB Device Controller Driver   Fabio Porcedda
      • [U-Boot] Atmel AT91 USB Device Controller Driver   Remy Bohmer
      • [U-Boot] [PATCH] ppc4xx/net: Rename 4xx_enet to ppc4xx_emac   Stefan Roese
      • [U-Boot] [PATCH] ppc4xx/net: Rename 4xx_enet to ppc4xx_emac   Michal Simek
      • [U-Boot] [PATCH] ppc4xx/net: Rename 4xx_enet to ppc4xx_emac   Ben Warren
• [U-Boot] Problem booting CRAMFS with flattened device tree   hendrik
  • [U-Boot] Problem booting CRAMFS with flattened device tree   Pieter
• [U-Boot] Issues when BDI2000 accesses the emtpy flash   Spark Zhao
  • [U-Boot] [PATCH] ppc4xx: Fix initialization of the SDRAM_CODT register   carolyn.j.smith at tektronix.com
    • [U-Boot] [PATCH] ppc4xx: Fix initialization of the SDRAM_CODT register   Stefan Roese
• [U-Boot] RW access to MMC/SD devices   twebb
  • [U-Boot] [PATCH] 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS   Kumar Gala
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Andy Fleming
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Mike Frysinger
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Andy Fleming
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Mike Frysinger
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Wolfgang Denk
  • [U-Boot] [PATCH] Add eth_get_dev_by_index   Ben Warren
  • [U-Boot] [PATCH] fsl-ddr: Allow system to boot if we have more than 4G of memory   Kumar Gala
  • [U-Boot] [PATCH] fsl-ddr: Allow system to boot if we have more than 4G of memory   Becky Bruce
• [U-Boot] Atmel AT91 USB Device Controller Driver   Remy Bohmer
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Wolfgang Denk
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Wolfgang Denk
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Wolfgang Denk
  • [U-Boot] [PATCH] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Ben Warren
  • [U-Boot] [PATCH] ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h   Stefan Roese
• [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Stefan Roese
  • [U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git   Wolfgang Denk
    • [U-Boot] [PATCH v2] ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards   Stefan Roese
• [U-Boot] [PATCH 0/8] MPC85xx: Support for TQM8548-AG and TQM8548-BE   Wolfgang Grandegger
  • [U-Boot] [PATCH 1/8] MPC85xx: TQM85xx: fix flash protection for boot loader   Wolfgang Grandegger
  • [U-Boot] [PATCH 6/8] MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration   Wolfgang Grandegger
• [U-Boot] [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548   Wolfgang Grandegger
  • [U-Boot] [PATCH v2 1/5] Enable multi chip support in the NAND layer   Wolfgang Grandegger
  • [U-Boot] [PATCH v2 2/5] Add multi chip support to the FSL-UPM driver   Wolfgang Grandegger
  • [U-Boot] [PATCH v2 3/5] Add support for TQM-specific chip select logic to FSL-UPM   Wolfgang Grandegger
    • [U-Boot] [PATCH v2 3/5] Add support for TQM-specific chip select logic to FSL-UPM   Scott Wood
    • [U-Boot] [PATCH v2 3/5] Add support for TQM-specific chip select logic to FSL-UPM   Wolfgang Grandegger
    • [U-Boot] [PATCH v2 3/5] Add support for TQM-specific chip select logic to FSL-UPM   Scott Wood
    • [U-Boot] [PATCH v2 3/5] Add support for TQM-specific chip select logic to FSL-UPM   Scott Wood
  • [U-Boot] [PATCH v2 4/5] Add wait flags to support board/chip specific delays   Wolfgang Grandegger
  • [U-Boot] [PATCH v2 5/5] Add multi-chip NAND support for the TQM8548 modules   Wolfgang Grandegger
    • [U-Boot] [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548   Scott Wood
• [U-Boot] [PATCH 2/8] MPC85xx: TQM85xx: make standard PCI/PCI-X configurable   Wolfgang Grandegger
• [U-Boot] [PATCH 3/8] MPC85xx: TQM8548: add support for the TQM8548_BE module   Wolfgang Grandegger
• [U-Boot] [PATCH 4/8] MPC85xx: TQM8548: add support for the TQM8548_AG module   Wolfgang Grandegger
• [U-Boot] [PATCH 5/8] MPC85xx: TQM8548: fix SDRAM timing for 533 MHz   Wolfgang Grandegger
• [U-Boot] [PATCH 7/8] MPC85xx: TQM8548: use cache for AG and BE variants   Wolfgang Grandegger
• [U-Boot] [PATCH 8/8] MPC85xx: TQM8548: workaround for erratum DDR 19 and 20   Wolfgang Grandegger
  • [U-Boot] [PATCH] pxa: fixing get_timer to return time in miliseconds.   Micha Kalfon
• [U-Boot] [PATCH 00/12] updates for keymile boards.   Heiko Schocher
• [U-Boot] [PATCH 01/12] 82xx, mgcoge: updates for 2009.03   Heiko Schocher
• [U-Boot] [PATCH 02/12] 8xx, mgsuvd: updates for 2009.03   Heiko Schocher
• [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Heiko Schocher
  • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Kim Phillips
    • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Heiko Schocher
      • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Kim Phillips
      • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Heiko Schocher
      • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Kim Phillips
      • [U-Boot] [PATCH 03/12] 83xx, kmeter1: add I2C, dtt, eeprom support   Heiko Schocher
• [U-Boot] [PATCH 04/12] 83xx, i2c: add mux support for fsl_i2c   Heiko Schocher
• [U-Boot] [PATCH 05/12] 83xx, kmeter1: autodetect size of DDR II RAM   Heiko Schocher
• [U-Boot] [PATCH 06/12] 83xx, kmeter1: updates for 2009.03   Heiko Schocher
• [U-Boot] [PATCH 07/12] 83xx: add missing TIMING_CFG1_CASLAT_* defines   Heiko Schocher
  • [U-Boot] [PATCH 07/12] 83xx: add missing TIMING_CFG1_CASLAT_* defines   Kim Phillips
• [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Heiko Schocher
  • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Kim Phillips
    • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Heiko Schocher
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Heiko Schocher
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Kim Phillips
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Kumar Gala
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Kumar Gala
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Scott Wood
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Kim Phillips
      • [U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Scott Wood
• [U-Boot] [PATCH 09/12] 8360, kmeter1: added bootcount feature.   Heiko Schocher
  • [U-Boot] [PATCH 09/12] 8360, kmeter1: added bootcount feature.   Kim Phillips
    • [U-Boot] [PATCH 09/12] 8360, kmeter1: added bootcount feature.   Heiko Schocher
• [U-Boot] [PATCH 10/12] powerpc: common updates for keymile boards   Heiko Schocher
  • [U-Boot] [PATCH 10/12] powerpc: common updates for keymile boards   Kim Phillips
    • [U-Boot] [PATCH 10/12] powerpc: common updates for keymile boards   Heiko Schocher
    • [U-Boot] [PATCH 10/12 v2] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 11/12] 8xx, mgsuvd: rename board to a more generic name   Heiko Schocher
• [U-Boot] [PATCH 12/12] 8xx: add support for new keymile kmsupx4 board.   Heiko Schocher
• [U-Boot] Loading Linux Image on AT91SAM9263-EK   Amandeep Bhullar
• [U-Boot] Question: how to implement post_word_store and post_word_load on MPC 8547/8548   Roman
• [U-Boot] [PATCH]V3 NAND_SPL support for phycore imx31   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add feature-removal-schedule.txt   Wolfgang Denk
• [U-Boot] [PATCH] Create configuration option for restricted ns16550 functions   Wolfgang Denk
  • [U-Boot] [PATCH] Create configuration option for restricted ns16550 functions   Ron Madrid
• [U-Boot] Loading Linux Image on AT91SAM9263-EK   Derek Ou
• [U-Boot] [PATCH 17/40] Blackfin: overhaul i2c driver   Timur Tabi
  • [U-Boot] [PATCH 17/40] Blackfin: overhaul i2c driver   Mike Frysinger
    • [U-Boot] [PATCH 17/40] Blackfin: overhaul i2c driver   Timur Tabi
• [U-Boot] [PATCH 17/40] Blackfin: overhaul i2c driver   Mike Frysinger
  • [U-Boot] [PATCH 17/40] Blackfin: overhaul i2c driver   Timur Tabi
    • [U-Boot] [PATCH v2] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Mike Frysinger
    • [U-Boot] [PATCH v2] drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)   Wolfgang Denk
    • [U-Boot] [PATCH] i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts   Mike Frysinger
    • [U-Boot] [PATCH] i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts   Heiko Schocher
    • [U-Boot] [PATCH v2] ppc4xx: Fix initialization of the SDRAM_CODT register   Stefan Roese
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
  • [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] [PATCH] 82xx, mgcoge: fix compile error   Heiko Schocher
  • [U-Boot] [PATCH] 82xx, mgcoge: fix compile error   Wolfgang Denk
• [U-Boot] [i2c] Please pull git://git.denx.de/u-boot-i2c.git   Heiko Schocher
  • [U-Boot] [i2c] Please pull git://git.denx.de/u-boot-i2c.git   Wolfgang Denk
    • [U-Boot] [PATCH] Add support for the digsy MTC board.   Grzegorz Bernacki
    • [U-Boot] [PATCH] Add support for the digsy MTC board.   Stefan Roese
    • [U-Boot] [PATCH v5] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] Cant Create FIT uImage   hendrik
  • [U-Boot] Cant Create FIT uImage   Wolfgang Denk
    • [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages   Becky Bruce
    • [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages   Wolfgang Denk
    • [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional improvements and fixes   Dirk Behme
    • [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin mux and GPIO configuration   Dirk Behme
    • [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board revision detection   Dirk Behme
    • [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto detection   Dirk Behme
    • [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin mux   Dirk Behme
    • [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Dirk Behme
    • [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Dirk Behme
    • [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Wolfgang Denk
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Grazvydas Ignotas
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Nishanth Menon
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Wolfgang Denk
    • [U-Boot] Clock handling (wasRe: [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB)   Nishanth Menon
    • [U-Boot] Clock handling (wasRe: [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB)   Dirk Behme
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Wolfgang Denk
    • [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
    • [U-Boot] [PATCH 7/7 v2] OMAP3: Clean up MMC code   Dirk Behme
    • [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default   Becky Bruce
    • [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default   Becky Bruce
    • [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default   Jon Loeliger
  • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
    • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Heiko Schocher
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Heiko Schocher
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Heiko Schocher
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Heiko Schocher
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Heiko Schocher
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   Wolfgang Denk
      • [U-Boot] [PATCH] 0/12 Multiadapter/multibus I2C   ksi at koi8.net
  • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   ksi at koi8.net
    • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Heiko Schocher
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Jon Loeliger
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Heiko Schocher
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Wolfgang Denk
    • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Wolfgang Denk
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   ksi at koi8.net
    • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   Wolfgang Denk
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1   ksi at koi8.net
  • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   ksi at koi8.net
    • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   Wolfgang Denk
      • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   ksi at koi8.net
    • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   Wolfgang Denk
      • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   ksi at koi8.net
    • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   Wolfgang Denk
      • [U-Boot] [PATCH] 2/12 Multiadapter/multibus I2C, common part 2   ksi at koi8.net
  • [U-Boot] [PATCH] 3/12 Multiadapter/multibus I2C, boards   ksi at koi8.net
    • [U-Boot] [PATCH] 3/12 Multiadapter/multibus I2C, boards   Wolfgang Denk
      • [U-Boot] [PATCH] 3/12 Multiadapter/multibus I2C, boards   ksi at koi8.net
  • [U-Boot] [PATCH] 4/12 Multiadapter/multibus I2C, drivers part 1   ksi at koi8.net
  • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2   ksi at koi8.net
    • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2   Heiko Schocher
    • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2   Wolfgang Denk
      • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2   ksi at koi8.net
  • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   ksi at koi8.net
    • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   Heiko Schocher
    • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   Wolfgang Denk
      • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   ksi at koi8.net
      • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   Wolfgang Denk
      • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3   ksi at koi8.net
  • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
      • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
  • [U-Boot] [PATCH] 8/12 Multiadapter/multibus I2C, configs part 1   ksi at koi8.net
    • [U-Boot] [PATCH] 8/12 Multiadapter/multibus I2C, configs part 1   Wolfgang Denk
      • [U-Boot] [PATCH] 8/12 Multiadapter/multibus I2C, configs part 1   ksi at koi8.net
  • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2   ksi at koi8.net
    • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2   Heiko Schocher
    • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2   Wolfgang Denk
      • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2   ksi at koi8.net
      • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2   Wolfgang Denk
  • [U-Boot] [PATCH] 10/12 Multiadapter/multibus I2C, configs part 3   ksi at koi8.net
• [U-Boot] git setlocalversion   Derek Ou
  • [U-Boot] git setlocalversion   Mike Frysinger
  • [U-Boot] 11/12 Multiadapter/multibus I2C, configs part 4   ksi at koi8.net
  • [U-Boot] 12/12 Multiadapter/multibus I2C, configs part 5   ksi at koi8.net
• [U-Boot] [PATCH v2] i.MX31: Start the I2C clock on driver initialisation   Guennadi Liakhovetski
  • [U-Boot] [PATCH v2] i.MX31: Start the I2C clock on driver initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/9 v4] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
  • [U-Boot] [PATCH 3/9 v4] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 3/9 v4] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Wolfgang Denk
      • [U-Boot] [PATCH 3/9 v4] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Guennadi Liakhovetski
  • [U-Boot] [PATCH 3/9 v4] i.MX31: support GPIO as a chip-select in the mxc_spi driver   Anatolij Gustschin
  • [PATCH] soft_i2c: add multibus support   Heiko Schocher
• [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
  • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Wolfgang Denk
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   Heiko Schocher
    • [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4   ksi at koi8.net
• [U-Boot] [U-BOOT][PATCH 0/3] mflash u-boot support   unsik Kim
• [U-Boot] [U-BOOT][PATCH 3/3] Fix miscalculated total sectors   unsik Kim
  • [U-Boot] [U-BOOT][PATCH 3/3] Fix miscalculated total sectors   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [U-BOOT][PATCH 2/3] Change CONFIG_MG_DISK_RES unit to KB   unsik Kim
  • [U-Boot] [U-BOOT][PATCH 2/3] Change CONFIG_MG_DISK_RES unit to KB   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/3] Change CONFIG_MG_DISK_RES unit to KB   unsik Kim
• [U-Boot] [U-BOOT][PATCH 1/3] Initial mflash support   unsik Kim
  • [U-Boot] [U-BOOT][PATCH 1/3] Initial mflash support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 1/3] Initial mflash support   unsik Kim
      • [U-Boot] [PATCH 1/3] Initial mflash support   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/3] Initial mflash support   unsik Kim
• [U-Boot] registered SORDIMM MT9HTF6472RHY-667F1   arun sharma
  • [U-Boot] Fwd: registered SORDIMM MT9HTF6472RHY-667F1   arun sharma
• [U-Boot] Vitesse Phy not recognized VSC8211   hendrik
  • [U-Boot] Vitesse Phy not recognized VSC8211   Andy Fleming
    • [U-Boot] Vitesse Phy not recognized VSC8211   hendrik
      • [U-Boot] Vitesse Phy not recognized VSC8211   Pieter
      • [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Grzegorz Bernacki
      • [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] address of boot_params and kernel entry point   Iram Shahzad
• [U-Boot] [PATCH 1/1 v2] Setup extra MIMC200 chip selects   Mark Jackson
  • [U-Boot] [PATCH 1/1 v2] Setup extra MIMC200 chip selects   Haavard Skinnemoen
• [U-Boot] Coldfire: bootm: How does bootm pass bootargs to linux?   Richard Retanubun
  • [U-Boot] Coldfire: bootm: How does bootm pass bootargs to linux?   TC Liew
    • [U-Boot] [PATCH] Cleanup the comment for m68k linux boot argument passing.   Richard Retanubun
      • [U-Boot] [PATCH] Cleanup the comment for m68k linux boot argument passing.   Mike Frysinger
      • [U-Boot] [PATCH] Cleanup the comment for m68k linux boot argument passing.   Richard Retanubun
      • [U-Boot] [PATCH V2] Cleanup the comment for m68k linux boot argument passing.   Richard Retanubun
      • [U-Boot] [PATCH V2] Cleanup the comment for m68k linux boot argument passing.   Mike Frysinger
      • [U-Boot] [PATCH V2] Cleanup the comment for m68k linux boot argument passing.   Richard Retanubun
      • [U-Boot] [PATCH V2] Cleanup the comment for m68k linux boot argument passing.   Wolfgang Denk
• [U-Boot] NAND issues   Derek Ou
  • [U-Boot] NAND issues   Scott Wood
  • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1, fixed   ksi at koi8.net
    • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1, fixed   Wolfgang Denk
      • [U-Boot] [PATCH] 1/12 Multiadapter/multibus I2C, common part 1, fixed   ksi at koi8.net
  • [U-Boot] [PATCH] 5/12 Multiadapter/multibus I2C, drivers part 2, fixed   ksi at koi8.net
  • [U-Boot] [PATCH] 6/12 Multiadapter/multibus I2C, drivers part 3, fixed   ksi at koi8.net
  • [U-Boot] [PATCH] 9/12 Multiadapter/multibus I2C, configs part 2, fixed   ksi at koi8.net
  • [U-Boot] [PATCH] Multiadapter/multibus I2C, i2c.h fix   ksi at koi8.net
    • [U-Boot] [PATCH] Multiadapter/multibus I2C, i2c.h fix   Wolfgang Denk
      • [U-Boot] [PATCH] Multiadapter/multibus I2C, i2c.h fix   ksi at koi8.net
  • [U-Boot] [PATCH] Multiadapter/multibus I2C, at91rm9200 and friends   ksi at koi8.net
    • [U-Boot] [PATCH] Multiadapter/multibus I2C, at91rm9200 and friends   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] proper file encoding   Mike Frysinger
  • [U-Boot] proper file encoding   Wolfgang Denk
    • [U-Boot] [PATCH 00/27] standardize mac address handling in u-boot   Mike Frysinger
    • [U-Boot] [PATCH 02/27] doc/README.enetaddr: document proper MAC usage   Mike Frysinger
    • [U-Boot] [PATCH 02/27] doc/README.enetaddr: document proper MAC usage   Wolfgang Denk
    • [U-Boot] [PATCH 02/27] doc/README.enetaddr: document proper MAC usage   Mike Frysinger
    • [U-Boot] [PATCH 03/27] Blackfin: bfin_mac: force boards to setup the MAC themselves   Mike Frysinger
    • [U-Boot] [PATCH 04/27] net: get mac address from environment and use eth util funcs   Mike Frysinger
    • [U-Boot] [PATCH 05/27] bdinfo: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 06/27] bootvx: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 07/27] lynxkdi: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 08/27] nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()   Mike Frysinger
    • [U-Boot] [PATCH 09/27] AmigaOneG3SE/enet: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 10/27] boards: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 10/27] boards: get mac address from environment   Wolfgang Denk
    • [U-Boot] [PATCH 10/27] boards: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 11/27] drivers/net/: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 12/27] bcm570x: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 13/27] cs8900: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 14/27] sh_eth: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 15/27] lan91c96/smc91111/smc911x: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 16/27] cpu/: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 16/27] cpu/: get mac address from environment   Wolfgang Denk
    • [U-Boot] [PATCH 16/27] cpu/: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 17/27] npe: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 18/27] lib_*/board.c: do not initialize bi_enet*addr in global data   Mike Frysinger
    • [U-Boot] [PATCH 19/27] nx823: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 20/27] arm: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 21/27] cmc_pu2: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 21/27] cmc_pu2: get mac address from environment   Wolfgang Denk
    • [U-Boot] [PATCH 21/27] cmc_pu2: get mac address from environment   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Stefan Roese
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Ben Warren
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 22/27] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Wolfgang Denk
    • [U-Boot] [PATCH 23/27] kup4k/kup4x: rename load_sernum_ethaddr() to kup_load_sernum_ethaddr()   Mike Frysinger
    • [U-Boot] [PATCH 23/27] kup4k/kup4x: rename load_sernum_ethaddr() to kup_load_sernum_ethaddr()   Wolfgang Denk
    • [U-Boot] [PATCH 24/27] tqm8xx: rename load_sernum_ethaddr() to tqc_load_sernum_ethaddr()   Mike Frysinger
    • [U-Boot] [PATCH 24/27] tqm8xx: rename load_sernum_ethaddr() to tqc_load_sernum_ethaddr()   Wolfgang Denk
    • [U-Boot] [PATCH 25/27] ppc: do not initialize bi_enet*addr in global data   Mike Frysinger
    • [U-Boot] [PATCH 26/27] drop now unused load_sernum_ethaddr() function   Mike Frysinger
    • [U-Boot] [PATCH 26/27] drop now unused load_sernum_ethaddr() function   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 26/27] drop now unused load_sernum_ethaddr() function   Mike Frysinger
    • [U-Boot] [PATCH 26/27] drop now unused load_sernum_ethaddr() function   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Scott Wood
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Scott Wood
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Scott Wood
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Kim Phillips
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Mike Frysinger
    • [U-Boot] [PATCH 27/27] remove bi_enet*addr from global data for all arches   Wolfgang Denk
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Mike Frysinger
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Wolfgang Denk
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Mike Frysinger
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Wolfgang Denk
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Mike Frysinger
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Scott Wood
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Wolfgang Denk
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Mike Frysinger
    • [U-Boot] [PATCH 01/27] net: new utility functions for working with enetaddr's   Wolfgang Denk
• [U-Boot] [i2c] Please pull git://git.denx.de/u-boot-i2c.git   Heiko Schocher
  • [U-Boot] [i2c] Please pull git://git.denx.de/u-boot-i2c.git   Wolfgang Denk
• [U-Boot] where is i.MX31 branch?   Dennis.Yxun
  • [U-Boot] where is i.MX31 branch?   Guennadi Liakhovetski
  • [U-Boot] How to implement a starting logo   李志浩
    • [U-Boot] How to implement a starting logo   Wolfgang Denk
      • [U-Boot] How to implement a starting logo   LiZhihao
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
  • [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Matthias Fuchs
  • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Matthias Fuchs
      • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Matthias Fuchs
      • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Update PMC405 board support   Matthias Fuchs
  • [U-Boot] [PATCH] ppc4xx: Update PMC405 board support   Stefan Roese
• [U-Boot] [PATCH] fpga: Fix Spartan II FPGA booting   Matthias Fuchs
  • [U-Boot] [PATCH] fpga: Fix Spartan II FPGA booting   Wolfgang Denk
• [U-Boot] [PATCH] fpga: Fix Spartan III FPGA booting   Matthias Fuchs
  • [U-Boot] [PATCH] fpga: Fix Spartan III FPGA booting   Wolfgang Denk
• [U-Boot] tftp not working   Afzal Nadirshah
  • [U-Boot] tftp not working   Wolfgang Denk
    • [U-Boot] tftp not working   Afzal Nadirshah
      • [U-Boot] tftp not working   Stefan Roese
      • [U-Boot] tftp not working   Afzal Nadirshah
      • [U-Boot] tftp not working   Stefan Roese
      • [U-Boot] tftp not working   Afzal Nadirshah
      • [U-Boot] tftp not working   Afzal Nadirshah
  • [U-Boot] tftp not working   Stefan Roese
• [U-Boot] zmodem support   钟武文
  • [U-Boot] zmodem support   Wolfgang Denk
• [U-Boot] Fwd: [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548   arun sharma
  • [U-Boot] Fwd: [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548   Wolfgang Grandegger
• [U-Boot] SDRAM error for RD_EN and 2T_EN   hendrik
• [U-Boot] MPC8548 CPU v2 errata   hendrik
  • [U-Boot] MPC8548 CPU v2 errata   Jens Gehrlein
    • [U-Boot] MPC8548 CPU v2 errata   hendrik
      • [U-Boot] MPC8548 CPU v2 errata   Jens Gehrlein
• [U-Boot] BDI 2000 strangeness on MPC8548 v2   hendrik
  • [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
    • [U-Boot] PCI-E problems on Kilauea board   Stefan Roese
      • [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
      • [U-Boot] PCI-E problems on Kilauea board   Stefan Roese
      • [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
      • [U-Boot] [PATCH] TQM85xx: Fix a couple warnings in TQM8548 build   Andy Fleming
      • [U-Boot] [PATCH] TQM85xx: Fix a couple warnings in TQM8548 build   Jens Gehrlein
      • [U-Boot] [PATCH] TQM85xx: Fix a couple warnings in TQM8548 build   Wolfgang Grandegger
      • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
      • [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
      • [U-Boot] Please pull mmc_framework from u-boot-mpc85xx.git   Andy Fleming
      • [U-Boot] Please pull mmc_framework from u-boot-mpc85xx.git   Wolfgang Denk
  • [PATCH] mpc83xx: fix builds with new linker and improve link script rodata section   Kim Phillips
• [U-Boot] UML税T票JJ   王先生
  • [U-Boot] [PATCH 00/30] standardize mac address handling in u-boot (v2)   Mike Frysinger
  • [U-Boot] [PATCH 01/30] vsprintf: pull updates from Linux kernel   Mike Frysinger
  • [U-Boot] [PATCH 01/30] vsprintf: pull updates from Linux kernel   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 01/30] vsprintf: pull updates from Linux kernel   Mike Frysinger
  • [U-Boot] [PATCH 01/30] vsprintf: pull updates from Linux kernel   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 01/30] vsprintf: pull updates from Linux kernel   Mike Frysinger
  • [U-Boot] [PATCH 03/30] net: new utility functions for working with enetaddr's   Mike Frysinger
  • [U-Boot] [PATCH 03/30] net: new utility functions for working with enetaddr's   Mike Frysinger
  • [U-Boot] [PATCH 04/30] doc/README.enetaddr: document proper MAC usage   Mike Frysinger
  • [U-Boot] [PATCH 05/30] Blackfin: bfin_mac: force boards to setup the MAC themselves   Mike Frysinger
  • [U-Boot] [PATCH 06/30] net: get mac address from environment and use eth util funcs   Mike Frysinger
  • [U-Boot] [PATCH 06/30] net: get mac address from environment and use eth util funcs   Peter Tyser
  • [U-Boot] [PATCH 06/30] net: get mac address from environment and use eth util funcs   Mike Frysinger
  • [U-Boot] [PATCH 07/30] bdinfo: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 08/30] bootvx: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 09/30] lynxkdi: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 10/30] nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()   Mike Frysinger
  • [U-Boot] [PATCH 11/30] AmigaOneG3SE/enet: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 12/30] boards: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 13/30] drivers/net/: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 14/30] bcm570x: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 15/30] cs8900: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 16/30] sh_eth: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 17/30] lan91c96/smc91111/smc911x: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 18/30] cpu/: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 19/30] npe: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 20/30] lib_*/board.c: do not initialize bi_enet*addr in global data   Mike Frysinger
  • [U-Boot] [PATCH 21/30] nx823: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 22/30] arm: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 23/30] boards: move board_get_enetaddr() into board-specific init   Mike Frysinger
  • [U-Boot] [PATCH 24/30] cmc_pu2: get mac address from environment   Mike Frysinger
  • [U-Boot] [PATCH 25/30] pcs440ep: get mac address from environment and move load_sernum_ethaddr() to board init   Mike Frysinger
  • [U-Boot] [PATCH 26/30] kup4k/kup4x: rename load_sernum_ethaddr() to kup_load_sernum_ethaddr()   Mike Frysinger
  • [U-Boot] [PATCH 27/30] tqm8xx: rename load_sernum_ethaddr() to tqc_load_sernum_ethaddr()   Mike Frysinger
  • [U-Boot] [PATCH 28/30] ppc: mark global bi_enet*addr as legacy   Mike Frysinger
  • [U-Boot] [PATCH 29/30] drop now unused load_sernum_ethaddr() function   Mike Frysinger
  • [U-Boot] [PATCH 30/30] remove bi_enet*addr from global data for all arches   Mike Frysinger
  • [U-Boot] [PATCH 02/30] convert print_IPaddr() to %pI4   Mike Frysinger
• [U-Boot] [U-BOOT][PATCH 1/3] mflash : Fix some style issue   unsik Kim
  • [U-Boot] [U-BOOT][PATCH 1/3] mflash : Fix some style issue   Wolfgang Denk
    • [U-Boot] [U-BOOT][PATCH 1/3] mflash : Fix some style issue   unsik Kim
• [U-Boot] [U-BOOT][PATCH 2/3] mflash : Remove deprecated CONFIG_SYS_HZ value (not 1000), support code   unsik Kim
• [U-Boot] [U-BOOT][PATCH 3/3] mflash : Improve mg_disk_read(write) sector count calculation   unsik Kim
• [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Minkyu Kang
  • [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Wolfgang Denk
• [U-Boot] [PATCH] qong: changes to Dave/DENX Qong configuration   Wolfgang Denk
  • [U-Boot] [PATCH] qong: changes to Dave/DENX Qong configuration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support   Heiko Schocher
• [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1   Heiko Schocher
• [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.   Heiko Schocher
  • [U-Boot] [PATCH] TQM8260: fix locations of kernel and ramdisk images in flash   Wolfgang Denk
• [U-Boot] [PATCH] added Vitesse VSC8211 definition to tsec.c   Pieter
  • [U-Boot] [PATCH] added Vitesse VSC8211 definition to tsec.c   Ben Warren
• [U-Boot] U-BOOT MPC8560 based board : No prints after relocation   Deepak Gaur
  • [U-Boot] U-BOOT MPC8560 based board : No prints after relocation   Wolfgang Denk
  • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Amit Margalit
    • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Michael Trimarchi
      • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Amit Margalit
      • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Michael Trimarchi
      • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Amit Margalit
      • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Andy Fleming
      • [U-Boot] MAC address being reset to 00:00:00:00:00:00 ?   Amit Margalit
  • [U-Boot] Strange data behaviour   Remco Poelstra
    • [U-Boot] Strange data behaviour   Wolfgang Denk
      • [U-Boot] Strange data behaviour   Remco Poelstra
      • [U-Boot] Strange data behaviour   Kim Phillips
• [U-Boot] U-Boot Makefile question   Steven Zedeck
  • [U-Boot] U-Boot Makefile question   Michael Lawnick
  • [U-Boot] U-Boot Makefile question   Mike Frysinger
  • [U-Boot] U-Boot Makefile question   Frank Svendsbøe
• [U-Boot] How to implement starting logo?   lzhmail
  • [U-Boot] How to implement starting logo?   Anatolij Gustschin
• [U-Boot] [PATCH] ppc4xx: Cleanup PMC405 board support   Stefan Roese
  • [U-Boot] [PATCH] Pad data length for nand write   Derek Ou
  • [U-Boot] [PATCH] Pad data length for nand write   Derek Ou
  • [U-Boot] [PATCH] Pad data length for nand write   Scott Wood
  • [U-Boot] [PATCH] Pad data length for nand write   Derek Ou
  • [U-Boot] [PATCH] Pad data length for nand write   Scott Wood
  • [U-Boot] [PATCH] Pad data length for nand write   Derek Ou
  • [U-Boot] [PATCH] Pad data length for nand write   Mike Frysinger
  • [U-Boot] [PATCH] Pad data length for nand write   Derek Ou
  • [U-Boot] [PATCH] Pad data length for nand write   Scott Wood
  • [U-Boot] [PATCH] Pad data length for nand write   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals andmodules enable functions.   Hugo Villeneuve
  • [U-Boot] spd_dram.c for mpc83xx broken   Joakim Tjernlund
    • [U-Boot] spd_dram.c for mpc83xx broken   Kim Phillips
    • [U-Boot] spd_dram.c for mpc83xx broken   Liu Dave-R63238
    • [U-Boot] spd_dram.c for mpc83xx broken   Joakim Tjernlund
    • [U-Boot] spd_dram.c for mpc83xx broken   Joakim Tjernlund
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Ron Madrid
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Kim Phillips
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Scott Wood
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Wolfgang Denk
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Kim Phillips
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Scott Wood
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Ron Madrid
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Kim Phillips
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Wolfgang Denk
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Kim Phillips
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Wolfgang Denk
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Kim Phillips
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Ron Madrid
    • [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions   Wolfgang Denk
  • [PATCH] Create configuration option for restricted ns16550 functions   Ron Madrid
  • [PATCH] Create configuration option for restricted ns16550 functions   Ron Madrid
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   John Rigby
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   Wolfgang Denk
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   John Rigby
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   mjmarx
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   Wolfgang Denk
    • [U-Boot] [PATCH] ADS5121 Add mem config for current rev4 boards   mjmarx
• [U-Boot] Amenajari interioare pentru casa dumneavoastra!!!   Westfloor
• [U-Boot] U-boot level MPC8548 Ethernet internal/External Loop backtesting   Swarthout Edward L-SWARTHOU
• [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] smc911x_eeprom: new example app for managing newer SMC parts   Wolfgang Denk
• [U-Boot] [PATCH v2] smc911x: split out useful defines/functions into local header   Wolfgang Denk
• [U-Boot] [PATCH 1/4] API: Use stack pointer as API signature search hint in the glue layer.   Wolfgang Denk
• [U-Boot] [PATCH 2/4] API: Provide syscall entry point for the ARM architecture.   Wolfgang Denk
• [U-Boot] [PATCH 3/4] API: Only output test data when reading was successful.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] API: Improve glue mid-layer of the API demo application.   Wolfgang Denk
• [U-Boot] [PATCH] disable imls command if no flash is defined   Wolfgang Denk
• [U-Boot] [PATCH v3] Remove static type from gunzip_bmp()   Wolfgang Denk
• [U-Boot] [PATCH] rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV   Wolfgang Denk
• [U-Boot] [PATCH] include/image.h: Ease grepping of image_* functions   Wolfgang Denk
• [U-Boot] [PATCH] disk: convert part_* files to COBJ-$(CONFIG_XXX) style   Wolfgang Denk
• [U-Boot] [PATCH] mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile   Wolfgang Denk
• [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Minkyu Kang
  • [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Wolfgang Denk
  • [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Larry Johnson
    • [U-Boot] [PATCH] bootm: Reduce the unnecessary memmove   Wolfgang Denk
      • [U-Boot] [PATCH] Move test for unnecessary memmove to memmove_wd()   Larry Johnson
      • [U-Boot] [PATCH] nmdk8815: rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV   Mike Frysinger
      • [U-Boot] [PATCH] nmdk8815: rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] nmdk8815: rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV   Alessandro Rubini
      • [U-Boot] [PATCH] nmdk8815: rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV   Mike Frysinger
      • [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree   Kumar Gala
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] flash configuration in u-boot   zix
  • [U-Boot] flash configuration in u-boot   zix
    • [U-Boot] flash configuration in u-boot   ABIRAMA SUNDARI
    • [U-Boot] flash configuration in u-boot   Wolfgang Denk
  • [U-Boot] flash configuration in u-boot   zix
  • [PATCH 09/13] Initial mflash support   unsik Kim
• [U-Boot] RAM Probing for ads5121rev4   Emanuele Placidi
  • [U-Boot] RAM Probing for ads5121rev4   Wolfgang Denk
• [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Dmitry K
  • [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Wolfgang Denk
    • [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Dmitry Koroban
      • [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Wolfgang Denk
    • [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Dmitry K
• [U-Boot] what are the configurations needed for new board   ABIRAMA SUNDARI
  • [U-Boot] what are the configurations needed for new board   Wolfgang Denk
• [U-Boot] which file have memory map information   ABIRAMA SUNDARI
  • [U-Boot] which file have memory map information   Wolfgang Denk
• [U-Boot] [U-BOOT][PATCH 1/4] mflash : Change MG_BASE define to inline function   unsik Kim
• [U-Boot] [U-BOOT][PATCH 2/4] mflash : Fix uncorrect mask operation   unsik Kim
• [U-Boot] [U-BOOT][PATCH 3/4] mflash : Use common libata function   unsik Kim
• [U-Boot] [U-BOOT][PATCH 4/4] mflash : Support word unaligned access   unsik Kim
• [U-Boot] U-Boot Digest, Vol 9, Issue 217   Afzal Nadirshah
  • [U-Boot] U-Boot Digest, Vol 9, Issue 217   Wolfgang Denk
    • [U-Boot] U-Boot Digest, Vol 9, Issue 217   Afzal Nadirshah
      • [U-Boot] [PATCH] ppc4xx: PCIe: Change 16GB inbound memory to 4GB   Stefan Roese
      • [U-Boot] [PATCH] ppc4xx: PCIe: Change 16GB inbound memory to 4GB   Felix Radensky
      • [U-Boot] [PATCH] ppc4xx: Some more PMC405 coding-style cleanup   Stefan Roese
      • [U-Boot] [PATCH] ppc4xx: Some more PMC405 coding-style cleanup   Matthias Fuchs
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
  • [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] u-boot NAND fail on M5329EVB   kescuin
  • [U-Boot] [PATCH] MMC: Don't use new framework code if not enabled   Dirk Behme
  • [U-Boot] [PATCH] MMC: Don't use new framework code if not enabled   Wolfgang Denk
  • [U-Boot] [PATCH v3] Create configuration option for restricted ns16550 functions   Ron Madrid
  • [U-Boot] [PATCH v3] Create configuration option for restricted ns16550 functions   Wolfgang Denk
• [U-Boot] Beagleboard adding OTG host support   yanfeng qin
  • [U-Boot] Beagleboard adding OTG host support   Remy Bohmer
    • [U-Boot] [PATCH] Fix build errors after making flash_get_info() non-static   Wolfgang Denk
    • [U-Boot] [PATCH V2] Fix build errors after making flash_get_info() non-static   Wolfgang Denk
• [U-Boot] [PATCH] mkconfig: include board config.h before asm/config.h   Kim Phillips
  • [U-Boot] [PATCH] mkconfig: include board config.h before asm/config.h   Wolfgang Denk
    • [U-Boot] [PATCH] mkconfig: include board config.h before asm/config.h   Kim Phillips
      • [U-Boot] [PATCH] mkconfig: include board config.h before asm/config.h   Wolfgang Denk
  • [U-Boot] [PATCH] mkconfig: include board config.h before asm/config.h   Wolfgang Denk
    • [U-Boot] [PATCH v4] Create configuration option for restricted ns16550 functions   Ron Madrid
    • [U-Boot] [PATCH v4] Create configuration option for restricted ns16550 functions   Wolfgang Denk
• [U-Boot] [PATCH] sata_sil3114: fix compiler warning   Kim Phillips
• [U-Boot] [PATCH] README: remove duplicate entry   Kim Phillips
  • [U-Boot] [PATCH] README: remove duplicate entry   Wolfgang Denk
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Mike Frysinger
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Heiko Schocher
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Mike Frysinger
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Wolfgang Denk
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Mike Frysinger
    • [U-Boot] [PATCH] Blackfin: bf537-stamp: fix I2C board defines   Heiko Schocher
    • [U-Boot] [PATCH] Blackfin: disable syscontrol code for now   Mike Frysinger
• [U-Boot] Uncompressing Linux Kernel hangs and no console messages   Gurumurthy Gowdar
• [U-Boot] U-boot mainline build fails on MMC   Remy Bohmer
  • [U-Boot] U-boot mainline build fails on MMC   Wolfgang Denk
    • [U-Boot] U-boot mainline build fails on MMC   Dirk Behme
      • [U-Boot] U-boot mainline build fails on MMC   Remy Bohmer
      • [U-Boot] U-boot mainline build fails on MMC   Dirk Behme
      • [U-Boot] U-boot mainline build fails on MMC   Wolfgang Denk
    • [U-Boot] U-boot mainline build fails on MMC   Remy Bohmer
      • [U-Boot] U-boot mainline build fails on MMC   Dirk Behme
      • [U-Boot] U-boot mainline build fails on MMC   Remy Bohmer
      • [U-Boot] U-boot mainline build fails on MMC   Wolfgang Denk
      • [U-Boot] [PATCH] TQM8xxL: make some room in low memory for future needs   Wolfgang Denk